Instruction Guide iPhone 7 Plus
EVOAQUA
2 3
WHAT’S IN THE BOX?
OPENING YOUR EVO AQUA
Evo Aqua case
Dummy phone
Cleaning cloth
Instruction guide
Opening key
Open the SecureClip at the bottom of your
case.
Insert the supplied opening key into the
allocated slot as illustrated and twist to
release the back cover.
Do not pull on the SecureClip. This
could damage your case.
1.
2.
3.
4.
5.
1.
2.
PRE-ASSEMBLY CHECKS
Before assembling your case, check that the
following areas are free from dust, debris and
damage:
ENGLISH
1. 2.
4 5
WATER TEST
1.
2.
Your Evo Aqua was water tested before it
left our factory. To make sure that nothing’s
happened to it in transit, we suggest that you
test it again before using it for the rst time.
Open your case following the instructions
above and carry out the pre-assembly
checks.
Insert the supplied dummy phone into the
front cover of your case, base rst.
ENGLISH
Seals
Acoustic vents
Fingerprint membrane
Using both of your thumbs and index
ngers, squeeze the top left and top
right corners of your case rmly together,
making sure that the clips on either side
of the three SecureHooks are engaged
securely.
On the top of your case’s back-plate, you’ll
notice three SecureHooks. Insert these
hooks into the slots on the back side of the
front cover.
Using your thumbs, press these hooks
rmly up into their slots. You should feel
them shift up into place.
4.
5.
6.
ENGLISH
3.Press the dummy down rmly into your
case as illustrated.
Loading...