Tech JS109HT2, JS109HR2 User Manual

2.4GHz PS2 RF CONTROLLER

RX TX

INSTRUCTION MANUAL

1. SUMMARY

Using 2.4GHz Multi Channel RF module. Compatible with SONY PLAYSTATION 2. Using
AC key to change channels. Supporting 16 players simultaneously. Having auto-sleep
function to save battery life.

2. OPERATION INSTRUCTION

2.1 Basic operation instruction

2.1.1 Connecting
a).Insert receiver into PS2 console, receiver red LED bright, put AAA(LR03)
3PCS batteries into the battery compartment of controller. So receiver has been
connected with controller.

PS2

b). When several players (less than 16 players) connect the console

simultaneously, receiver will auto check the controllers, and generate
one-to-one channels. If channels repeat or be interfered, please refer to
DISCONNECT and RESETTING. Player can check the green LED in the
controller to know the connection situation. If green LED is bright, it means
controller works well with receiver. If green LED is twinkle, it means the
controller didn’t work well with receiver. If green LED is dark, it means the
controller didn’t work with receiver.

Vision Electronics Co., Ltd

RX RX RX

TX TX TX TX RX

.........

RX

PS2

2.1.2 DISCONNECT & RESETTING
a). When battery is inadequate, or information sending is interfered by block, the
channel will be changeful, or controller information will off and on. In this
moment, the green LED in the controller will be dark.

In this situation, please check the battery and make sure that shock has been
taken off.

Then please press AC key of wished controller, so receiver and wished controller
has confirmed new channel. In the meanwhile, Connect LED in the receiver and
controller will light, so you can play normally.

.........

PS2

b). If original channels of several receivers repeat and interfere with each other,
channel is changeful as well. So it is for controllers.

Vision Electronics Co., Ltd