Teccpo TAHG01P User Manual

Model: TAHG01P
User Manual
HEAT GUN
TAHG01 HEAT GUN
IMPORTANT SAFETY INSTRUCTIONS
-be careful when using the appliance in places where there are combusƟble materials;
-do not apply to the same place for long Ɵme;
-do not use in presence of an explosive atmosphere;
-be aware that heat may be conducted to combusƟble materials that are out of sight;
-do not leave the appliance unaƩended when it is switched on.
If the supply cord is damaged, it must be replaced by manufacturer, its service agent or similarity qualiĮed persons in order to avoid a haz
ard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision
SAVE THESE INSTRUCTIONS
Safety Rules
WARNING: Non-ob
servance of the safety rules while working with the hot air tool can lead to Įre, explosion, electric shock or burns. Read the operaƟŶŐ instrucƟons before using the tool and always observe the safely rules. Save these instrucƟons and give them to persons that have not
been instructed before they use the tool.
WARNING: A damaged casing or an opened unit can lead to a hazardous electric shock. Do not open the unit and do not put a damaged unit into operaƟŽŶ Do not drill into the casing, e.g. to aƩach a company label. B
efore any work on the unit, pull the mains plug.
WARNING: A damaged power cord can lead to a hazardous electric shock.
Check the power cord regularly. Do not operate the unit when the power cord is damaged. Always have a damaged cord replaced through a specialist. Do not wrap the cord around the unit and protect it from oil, heat and sharp edges. Do not carry the unit by the cord and do not use
the cord to pull the plug from the outlet.
2
WARNING: Do not work in rain or in a moist or wet environment. This can lead to a hazardous electric shock. Keep the unit dry. Store the unit in a dry locaƟŽŶ when not in use. Consider the weather condiƟons. Do not work in wet sanitary faciliƟes Avoid body contact with grounded cables or
surfaces, such as pipes, radiators, ranges and refrigerators.
WARNING: Connect power tools that are used in the open via a residual current circuit breaker (RCCB).
WARNING: Danger of explosion! The hot air tool can explosively ignite combusƟb
le Ňuids and gases. Do not work in a potenƟĂůly explosive environment. Check the surrounding before staƌƟŶŐ to work. Do not work on fuels or gas containers or in their vicinity, even when they are
empty.
WARNING: Danger of Įre! Heat can reach combusƟble materials that are hidden behind coverings, in ceilings, Ňoors or caviƟes, and ignite them. Inspect the work area before staƌƟŶg to work and in case of doubt, abstain from using the hot air tool. Do not point the unit at the same spot
for extended periods
WARNING: Danger of Įre! An
unsupervised operaƟŶŐ hot air tool can set Įre to objects that are close by. The unit must be supervised at all limes during operaƟŽŶ When allowing the switched oī unit to cool down, always place it down verƟcal and standing. Allow the unit to cool down completely.
WARNING: Danger of Įre! When working plasƟcs varnish or similar materials, gases develop that are easily inŇammable and can lead to explosions. Be prepared for Ňames to develop and keep suitable Įre-edžƟŶŐƵŝƐhing means at hand.
WARNING: Danger
of intoxicaƟŽŶ When working plasƟcs, varnish or similar materials, gases develop that can be aggressive or toxic. Avoid breathing in vapours, even when they appear to be harmless. Always provide for good venƟlaƟŽŶof the work area or wear a respirator.
WARNING: Danger of injury! The hot air jet can injure persons or animals.
Touching the hot tube of the heaƟŶŐ element or the nozzle leads to skin burns. Keep children and other persons away from the unit. Do not touch the tube of the heaƟng element or the noz
zle when they are hot. Do not
use the unit as a hair dryer. It develops much more heat than a hair dryer.
3
Do not use the unit to heat up Ňuids or to dry objects or materials that are destroyed through the inŇuence of hot air.
WARNING: UnintenƟŽŶal staƌƟŶŐ or unexpected switching on of the heaƟŶŐ element aŌer actuaƟŽŶ of the thermal relay can lead to injuries. Make sure that the switch is set to OFF when connecƟng the unit to the mains supply. Switch the unit OFF when the thermal relay has actuated
WARNING: Danger of injury! Using an air Ňow reŇecƟŽŶ nozzle that is not suitable for your unit can lead to burns. Use only original accessor
ies for
your model that are listed in these operaƟŶŐ instrucƟons.
WARNING: Danger of injury and Įre. The hot air tool is dangerous for children. Keep the hot air tool out of the reach of children.
DANGER: Danger of lead overheaƟŶŐ! Incorrect handing can lead to an accumulaƟŽŶ of heat and thus damage the unit. Do not operate the unit
when it is placed down horizontally or when pointed downward. The air –intake opening and the nozzle must not be covered. Use only nozzles that are suitable for your unit.
Technical Data
Model TAHG01P Voltage (V) US100-120V / UK 220-240V Frequency (Hz) 50/60 Power (W) US 1500W / UK2000W Switch posiƟŽŶ 0-1-2
Temperature
posiƟon 1 2
400 550
750 1022
ProtecƟŽŶĐlass
/
double insulated
4
100-120V
1500W
Loading...
+ 11 hidden pages