Page 1
1:10 SCALE 4WD ELECTRIC PRO RACING BUGGY
Page 2
Notice
This manual is written in english language only. If you need a manual in your language please visit our
website or contact your distributor!
Diese Anleitung wurde in englischer Sprache verfasst. Sollten sie eine Anleitung in ihrer Sprache
benötigen, besuchen sie unsere website oder konaktieren sie ihren Vertriebsagenten.
Questo manuale è stato scritto in inglese. Se avete bisogno del manuale nella tua lingua, si prega di
visitare il nostro sito web o contattate il proprio distributore.
Este manual está escrito en Inglés. Si necesita el manual en su idioma, por favor visite nuestro sitio
web o contacte con su distribuidor.
Ce manuel est écrit en langue anglaise. Si vous avez besoin d'un manuel dans votre langue
s'il vous plaît visitez notre site web ou contactez votre distributeur!
Deze handleiding is geschreven in het Engels taal beschikbaar. Als u een handleiding in uw eigen
taal kunt u terecht op onze website of neem contact op met uw distributeur!
Thank you for purchasing this T4 Competition Buggy by Team C. This manual shows instructions and
tips to built and maintain your T4. Please take some time to read through to get familiar with the shown
steps.
We continually improve our products, due to that, actual parts my be different to the illustrations.
Please check our website for the latest versions manuals and tips before you start to built this model.
Generall Information
THIS IS NOT A TOY!
Not suitable for children under 14 years of age without adult supervision.
This is a high performance vehicle, for safety reason don’t run on public streets, in crowded areas,
environmentally areas or near children or animals.
This model contains rotationg parts and parts which become hot during operation. Care must been
taken to avoid damage or injuries.
This product may require some assembly and routine maintance.
This product is covered by warranty based on material defectives. Crash damage or maintenance
failures are not covered under warranty.
Batteries should be used in good condition only, and need to be fully charged.
Nitro models should be driven outside of buildings only. Inhaling exhaust gases could cause health
damage.
Keep chemicals stored out of the range of small children.
Make sure your model and equipment is in perfect condition before you use it, to ensure savety
and fun while driving.
Page 3
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
反向开关
Transmitter Preparation
27MHzTransmitter Crystal（TX）
Transmitter crystal(TX)
Power Switch
ON
OFF
Antenna
Extend the antenna to the maximum
Length for best performance
The crystal can be replaced to change frequencies.
Note : You must also change receiver crystals!
Do not use AM crystals
Receiver crystal(RX)
Steering Trim
To be used for trimming the steering
operation
Throttle Trim
Steering Dual Rate
To be used to adjust steering servo throw
AA Alkaling Batteries
8X
Open battery cover at the bottom of transmitter.
Install batteries. Follow the direction of batteries
designated in the inside of battery box.
Transmitter Battery Installation
This switch is used for optional parts.
3ch Switch
Reverse Switch
Low Batteries(Light Blinks)
Good Batteries
Battery Level Indicator
Left turn
Straight (neutral)
Right turn
Brake
Forward
Stop(Neutral)
To be used for throttle operation
Throttle Trigger
Battery Cover
Servo Factory Settings
1
1
2
3
2
To be used for trimming the throttle
operation
3
4
4
Page 4
Transmitter Preparation
Battery
A new Ni-MH battery must be charged before it is used.Refer to the charger instruction manual for charging.
Set up the radio control system as indicated below.
6
5
8
Servo
Receiver
Transmitter
10
4
Switch
7
9
Electronic Speed
Controller
Motor
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
11
2
ON
OFF
6
10
ON
OFF
5
8
1
3
Tools required
Needie Nose Pllers
Awl
Grease
Screw Cement
Instant Glue
Hex Wrench
Differential Grease
Molybdenum Grease(Black)
Hex Wrench
Body Reamer
No need to pre-drill precise holes
(1mm to 15mm)can be drilled
Wire Cutters
Sharp Hobby knife
ROUND CUTTER
For trimming bodies!
Start
Finish
Install batteries.(Transmitter)
Extend the antenna.(Transmitter)
Connect the battery
Extend the antenna.(Reveiver)
Center the trims.
Switch on.(Transmitter)
Switch on.(Reveiver)
Make sure the servos are in command.
Switch off.(Reveiver)
Switch off.(Transmitter)
Retract the antenna(Transmitter)
1
8
7
2
5
3
4
6
9
10
11
H154
H162
H096
Page 5
Diff-gear Box / Motor Mount
……………14
TR4058 M3x8 Screw
……………15
TR4058 M3x8 Screw
1
Screw
Cement
Apply threadlock
TR4058 M3x8
TR4058 M3x8
TR4058 M3x8
TU0415
Motor Mount
TR4016
Center Gear-box-lower
TR4002
Front Gear-box-lower
T04039
Rear Gear-box-lower
Cut the waste material.
Suspension Mount/Side plate
T04051
Side plate-Right
T04051
Side plate-Left
T04050
Chassis
TU0416
Front Arm Mount-Rear
TU0418
Rear Arm Mount-Front
T04052
Battery Mount
TR4058 M3x8
2
1
Screw
Cement
Page 6
…………………………24
T02048 2.37mm Ball
T02098 5x8x2.5 Ball Bearing
………………4
TR4039 13.1x19x0.8 Washer
………4
………………2
T04037 2.6x26 Differential screw
………………2
T02050 2.6x6x3 Stop push
………………4
TR4057 10x12x0.2 Washer
…………4
T02099 10x15x4 Ball Bearing
T02100 5x10x4 Ball Bearing
……………4
86000 5.1x8x0.2 Washer
…………………2
TR4059 M3x5 Screw
………………2
……………2
T04032 2x9.8 Pin
T02100
T02098
T02098
T02048
T02099
T02099
T02050
2
Assemble as many times as specified Apply grease
T04033
Diff connecting
Cup-Long
ball bearing
TR4057
TR4057
T04037
T04037
Diff Nut
T02047
Differential Spring
T04033
Diff connecting
Cup-Short
TR4039
TR4039
TR4028
Diff Gear-39T
T04032
86000
T04037
T04037 4x1 O-Ring
………………2
Lock the difference screw, then relax 1/4 of the circles.
F/R Differential
Mid-F / Mid-R CVD
TR4059 M3x5
T02100
T04032
86000
TR4028
Diff Gear-16T
TR4059 M3x5
86000
TR4028
Diff Gear-16T
T04056
Mid CVD-Front(Long)
T04056
Mid CVD-Rear(Short)
中CVD-后(短)
Front
前
Rear
后
Apply threadlock
x2
3
x2
4
Screw
Cement
Screw
Cement
Screw
Cement
Page 7
TR4059 M3x8 Screw
………4
TR4059 M3x10 Screw
………8
…………2
T02099 10x15x4 Ball Bearing
……………4
T04032 2x9.8 Pin
TR4059 M3x5 Screw
………………2
T04018 Slipper nut
……………1
T02099
T02099
3
TR4059 M3x8
TR4059 M3x10
TR4059 M3x10
TR4059 M3x8
TR4002
Front Gear-box-cover
T04039
Rear Gear-box-cover
TR4027
Supr Gear-85T
T04036
Slipper pad
T04036
Slipper pad
T04018
T04032
T04032
T04032
T04032
TR4059 M3x5
TR4022
Spring Buckle
T04019
Slipper Spring
T04020
Slipper Hub-F
T04020
Slipper Hub-R
T04023
Center Shaft
中轴
T04021
Mid Connecting Hub-R
TR4059 M3x5
T04021
Mid Connecting Hub-F
Aften first run, re-adjust to around 3.5mm
Tighten for less slippage when traction grip
Loosen for more slippage
F/R Gear-Box
Mid Gear
Apply threadlock
5
6
Screw
Cement
Screw
Cement
Screw
Cement
3.5mm
Page 8
………………4
T02081 3x7x0.8 Washer
……………1
TR4059 M2.6x8 Screw
T02093 Ball stud-Short
……………1
TR4059 M3x10 Screw
……………4
Futaba - 25t Hitec - 24t Sanwa / JR / KO - 23t
Select the servo horn matching the servo being used.
T02081
4
Apply grease Must be purchased separately
TR4059 M2.6x8
TR4059 M3x10
T02093
T04006
Steering Servo
T04005
Servo Mount
Center Gear
Steering Servo
X
X
7
8
Page 9
………………2
TR4058 M3x8 Screw
T02092 Ball stud-Long
…………3
T04038 M3 Screw
…………2
5
Approx.5mm
TR4058 M3x8
T04038 M3
T02092
T02092
T02092
T04038 M3
T04003
Servo Saver-Top
T04003
Servo Saver-Bottom
T04004
Steering Rack
TR4049
Servo Saver Body
TR4049
Servo Saver Spring
TR4049
Servo Saver Nut
T04003
Servo Saver-left
Steering Servo
Buffer
9
10
Page 10
Upper Deck-Front / Front Upper Suspension Arm Mount
17.5mm
T04024 3x40 Turnbuckle
…………1
T04014 4.8mm Ball End-Long
……2
…………………4
T04031 4x7x2.5 Ball bearing
………………2
TR4058 M3x8 Screw
T02092 Ball stud-Long
………2
TR4059 M3x8 Screw
………3
TR4059 M3x10 Screw
………3
▲Projection.Note direction
6
Ture-to -scale diagram
TR4058 M3x8
T04014
T04014
T04024
T04031
TR4049
TR4059 M3x6 Screw
………1
TR4059 M3x6
TR4059 M3x8
T02092
TR4059 M3x10
T04053
Upper Deck-F
TR4004
Upper Suspension Arm Mount-F
TR4023
Front Body Mount
TR4059 M3x8
T04055
Antenna pipe mount
Buffer
Apply threadlock
…………………2
T04057 4.1x6x2.1 Washer
12
1:1
1:1
11
Screw
Cement
Screw
Cement
Screw
Cement
4mm
T04057
4.1x6x2.1 Washer
Page 11
Upper Deck-Rear / Rear Upper Suspension Arm Mount
TR4059 M3x8 Screw
……………2
T02092 Ball stud-Long
…………2
TR4059 M3x12 Screw
…………2
7
TR4059 M3x10 Screw
…………3
TR4059 M3x8
TU0428
Carbon Front Shock Tower
TR4004
Upper Suspension Arm Mount-R
T04053
Upper Deck-R
T02092
TR4059 M3x10
TR4059 M3x12 Screw
…………2
TR4059 M3x12
Front Shock Tower
14
13
Page 12
TR4059 M3x10 Screw
…………4
TR4059 M3x8 Screw
…………2
8
TU0429
Carbon Rear Shock Tower
TR4059 M3x10
T04012
Wing Brack
TR4059 M3x8
TR4059 M3x12 Screw
…………2
TR4059 M3x12
Rear Shock Tower
Rear Shock Tower
15
16
Page 13
TR4059 M3x12 Screw
…………4
T02093 Ball stud-Short
……………2
T02092 Ball stud-Long
…………2
T04038 M3 Screw
…………4
T02100 5x10x4 Ball Bearing
……………4
……………2
T04028 Front bearing collar
TR4011 1.6x11 Spring Pin
……………2
L R
9
Assemble both Left and Right
TR4059 M3x12
TR4016
Center Gear-box-cover
TR4011 1.6x11
T02100
T04028
T04038 M3
T02092
T02093
TR4007
Front Hub Carriers
TR4008
10 Degree-Left
Front Hub Carriers
13 Degree-Left
TR4007
Front Hub Carriers
TR4008
10 Degree-Right
Front Hub Carriers
13 Degree-Right
T04025
Front CVD
TR4006
Steering Block
T04011
Hex Mount
Front Hub Carrier
Spur Gear Cover
L
R
L
R
18
17
T04057
3.1x5.5x1.0 Washer
Page 14
TR4059 M2.5x4 Screw
…………………2
TR4046 2.5x30 Arm Pin
………………2
< L >
< R >
T04034 3x48.5 Arm Pin
………………2
………………2
TR4058 M3x8 Screw
TR4059 M3x10 Screw
……………2
……………2
T04002 Brace bushing
10
Assemble both Left and Right
T04007
Front Lower Arm
TR4059 M2.5x4
TR4046
T04002
T04034
TR4058 M3x8
TR4059 M3x10
T04009
Front Bumper
TU0416
Front Arm Mount-F
Front Hub Carrier
Front Suspension Arm
19
20
L
R
L
R
L
R
Page 15
18.5mm
23.5mm
T04024 3x45 Turnbuckle
…………2
T04014 4.8mm Ball End-Long
……12
T04024 3x40 Turnbuckle
…………4
17.5mm
Rear upper Rod
T04024 3x40
T04024 3x45
Steering Rod
Front upper Rod-R 前上拉杆-右
23.5mm
3x45 Turnbuckle
Front upper Rod-L
T02092 Ball stud-Long
…………2
T02100 5x10x4 Ball Bearing
……………4
TR4011 1.6x11 Spring Pin
……………2
……………2
T04028 Rear bearing collar
Rear Hub Carrier
< R >
▲Projection.Note direction
3x45 Turnbuckle
▲Projection.Note direction
3x40 Turnbuckle
▲Projection.Note direction
3x40 Turnbuckle
▲Projection.Note direction
11
Ture-to -scale diagram Assemble as many times as specified Assemble both Left and Right
T04014
T02100
TR4011
Rear Hub Carriers-L
T02092
T04028
T04027
Rear CVD
后CVD
T04011 1.6x11
T04011
Hex Mount
Turnbuckle
Front Turnbuckle
1:1 x1
x1
x2
x2
23
L
R
1:1
x2
L
R
21
22
1:1
1:1
1:1
L
R
4mm
Page 16
TR4059 M2.5x4 Screw
…………………2
TR4046 2.5x30 Arm Pin
………………2
TR4011 2.5x6x1 Washer
…………………4
< L >
< R >
T04035 3x51 Arm Pin
………………2
……………2
TR4058 M3x10 Screw
12
Assemble both Left and Right
TR4046
TR4059 M2.5x4
T04008
Rear Lower Arm-L
TR4011 2.5x6x1
TR4058 M3x10
T04035
TU0418
Rear Arm Mount-Rear
TU0418
Rear Arm Mount-Ball
………………………4
TU0418 Rear Arm Mount-Ball
Rear Hub Carrier
Rear Suspension Arm
L
R
24
L
R
25
L
R
Page 17
13
Assemble as many times as specified
TU0250-8 9x1 O-ring
………………4
……………………4
TU0250-8 1mm Washer-Black
…………………4
TU0250-8 2.8x1.9 O-ring
TU0250-8 Spring
TU0250-8 2.5mm Washer-White
TU0250-8 1mm Washer-White
…………………4
…………………4
…………………8
TU0250-8
Spring
TU0250-8
1mm Washer-Black
TU0250-8
2.8x1.9 O-ring
TU0250-8
2.5mm Washer-White
TU0250-8
2.8x1.9 O-ring
TU0250-8
1mm Washer-White
TU0250-8
9x1 O-ring
TU0250-3
Shock Below Cover
TU0250-3
Front Shock Absorber Body-Short
TU0250-4
Rear Shock Absorber Body-Long
Rear Turnbuckle
Assemble both Left and Right Assemble both front and rear
Shock Absorber
x2
x2
F
R
26
L
R
L
R
F
R
27
Page 18
14
Assemble as many times as specified Assemble both front and rear
TU0250-1/TU0250-2 2.3 E-ring
…………………8
TU0250-7 Rear Shock
Piston-White
……………4
TU0250-8 12x1 O-ring
……………4
TU0250-8 14x1.5 O-ring
……4
……………………4
T02062 5.8 Ball Stud
Shock Absorber
Oil
Shock Absorber
Oil
Front For Short
Rear For Long
Front For Short
Rear For Long
Front For Short
Rear For Long
Front For Short
Rear For Long
T02031 5.8 Ball End
TU0250-7 Front Shock
Piston-Black
……………4
……………4
TU0250-7
Front Piston-Black
Rear Piston-White
TU0250-1/TU0250-2
2.3 E-ring
TU0250-1/TU0250-2
2.3 E-ring
TU0250-1
Front Shock Absorber Shaft
TU0250-2
Rear Shock Absorber Shaft
TU0250-8
12x1 O-ring
T02062
5.8 Ball stud
T02062
5.8 Ball End
TU0250-3/TU0250-4
Shock Upper Cover
TU0250-8
14x1.5 O-ring
TU0250-10F
Front Shock Absorber Spring-Medium
TU0250-10R
Rear Shock Absorber Spring-Medium
TU0250-5
Below Spring Mount End
Shock Absorber
Shock Absorber
x2
F
R
x2
F
R
x2
F
R
28
29
TU0250-3/TU0250-4
Spring Adjuster
Page 19
Front Shock Absorber
TR4059 M3x22 Screw
……2
T02084 M3 Nylon Nut
TR4059 M3x12 Screw
……2
…………2
TU0250-6 Shock cap ball
………………2
15
TR4059 M3x22
TR4059 M3x12
T02084 M3
TU0250-6
TU0250-6
T02084 M3
TR4059 M3x12
TU0250-6 3.1x5.5x2.0 Aluminium Washer
………………………………2
TU0250-6 Shock cap ball
…………………2
TR4059 M3x22 Screw
…2
T02084 M3 Nylon Nut
TR4059 M3x12 Screw
…………2
…………………2
TU0250-6 3.1x5.5x2.0
…………………2
Aluminium Washer
Rear Shock Absorber
TR4059 M3x22
L
R
30
30
L
R
Assemble both Left and Right
L
R
Page 20
……………4
TR4058 M3x10 Screw
TR4059 M3x8 Screw
……………2
H481 M3x3 Screw
……………………1
Must be purchased separately
16
TR4058 M3x10
T04054
Battery Column
Motor
TU0415
Motor Cam
TR4059 M3x8
H481
21T Pinion Gear
H475 M3x3
Battery Column
Motor
X
X
32
33
Page 21
Motor
TR4059 M3x10 Screw
……………1
TR4059 M3x8 Screw
……………1
TR4059 M3x12 Screw
………1
Tighten the screws with one sheet of paper
inserted between both gears.
17
ESC
Receiver
Must be purchased separately
TR4059 M3x10
TR4059 M3x8
T02087
Double-sided Tape
TU0415
Motor Clamp
TR4016
Spur Gear Cover
T02087
Antenna Tube
T02087
Antenna Cap
TR4058 M3x8
T04013
Fan Mount
H380
Fan
T04013 M2.5x13
TR4059 M3x12
ESC / Receiver
34
X
X
X
X
X
35
Page 22
T02086 Small clip
……………4
Glue
< Front >
< Rear >
After fitting wheels to tyres,
apply instant glue as shown
18
Battery
Must be purchased separately Assemble both Left and Right
Assemble as many times as specified
T02086
TU0426
Carbon Battery Plate
TR4034
Front-tyre
TR4034
Front sponge
TR4035
Rear-tyre
TR4035
Rear sponge
TR4032
Front Rim
TR4033
Rear Rim
T02086
Battery
Wheel
X
X
L
R
x2
X
36
L
R
x2
F
R
X
X
x2
x2
X
37
Assemble both Front and Rear
F
R
Page 23
T02084 M4 Flanged Nylon Nut
……………4
……………2
TR4858 M3x10 Screw
……………2
T04012 Wing washer
T04012 Wing angle shim-3°
……………2
19
Assemble both Left and Right
T02084
T04016
Wing
T04012
Wing angle shim-3°
TR4058
T04012
Wheel
Wing
L
R
38
L
R
39
3°
3°
+3 deg
-3 deg
Page 24
20
Mask the windows from the inside.
Paint the body shell from the inside
using pc spray colors.
Bottom Cover
Body
40
41
6mm
6mm
T04017
T04058
Bottom Cover
Before you install the buttom cover,
you need to disassemble some parts.
Page 25
T02086 Small clip
……………1
TR4053
Velcro Tape
TR4053
Velcro Tape
魔鬼粘
T02086
T02086 Small clip
……………1
21
TR4053
Velcro Tape
TR4053
Velcro Tape
T02086
Body-Velcro Tape
Body
42
43
Page 26
T04057
Exploded View
22
TR4049
T04003
T02092
T04038
T02092
T02092
T04004
TR4012
TR4049
T04003
TR4049
T04031
T04014
T04024
T04031
T04031
TU0416
TR4058
TR4058
T04050
TR4016
TU0415
T04039
TR4002
T04033
T04033
T02050
T04033
T02098
T02098
T02098
T02098
TR4039
TR4039
T02047
T02047
TR4039
T02048
T02048
TR4057
TR4057
T04037
T02099
T02099
T02099
TR4057
TR4039
T04033
T04037
T02099
TR4057
T04056
T04056
T04032
T04032
86000
86000
T02100
TR4059
TR4028
TR4028
T02100
TR4059
TR4028
TR4028
T04037
TR4059
TR4059
TR4059
TR4059
TR4059
T02050
T04037
TR4002
T04039
TU0416
TR4059
T04009
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
TR4059
T04032
TR4027
T04036
T04036
T04020
T04020
T02099
T02099
T04021
TR4022
T04018
T04019
T04023
T02081
T04005
TR4059
TR4059
TR4023
T04053
T02092
TR4004
T04034
T04034
T04002
TR4046
T04007
T04025
T02100
T04028
TR4007
TR4006
T02100
T04038
T04011
TR4011
T02093
T02092
T04012
T04012
T04016
TR4058
T04012
TR4059
TR4004
T02092
T04035
T02084
T02084
T02084
T02084
TR4059
T02031
T02031
T02062
T02062
TR4034
TR4032
T02084
T02084
TR4033
TR4035
TR4053
TR4053
T02086
T02086
T02086
T02086
TU0426
TU0426
TR4016
TU0415
TR4016
H475
H475
T04035
T04008
TR4011
T02100
T02100
T04028
T04027
T02092
T04024
T04014
T04011
TR4059
TR4046
T04054
T04002
TU0415
T04057
T04031
T04057
TU0424
T04053
T02087
TR4059
TU0250-6
TU0250-6
T04051
T04051
T04052
T04055
TU0418
TU0418
TU0428
TU0429
TU0250-1
TU0250-2
TU0250-3
TU0250-3
TU0250-3
TU0250-3
TU0250-4
TU0250-4
TU0250-4
TU0250-4
TU0250-5
TU0250-5
TU0250-8
TU0250-8
TU0250-8
TU0250-8
TU0250-8
TU0250-8
TU0250-8
TU0250-8
TU0250-7
TU0250-7
TU0250-10F
TU0250-10R
TU0250-6
T04058
Page 27
2pcs
Front Shock Absorber Shaft
2pcs
Rear Shock Absorber Shaft
Front Shock Absorber Body
Upper Deck
Front
1pcs
Rear
1pcs
2.3 E-ring
2.3 E扣
4pcs
Parts list for T4 off-road buggy - 1
Shock cap ball
Front Arm Mount
Front - 1pcs
Rear - 1pcs
Chassis
1pcs
2pcs
4pcs
Battery Column
T04002
T04056
Mid Front CVD-Long
1pcs
Mid Rear CVD-Short
1pcs
TU0250 TU0252
Front Shock Absorber Rear Shock Absorber
Motor Mount
1Set
Front Arm Mount
Front
Rear
1pcs
1pcs
TU0415
TU0416 TU0418
Rear Arm Mount
Front 1pcs
Rear 1pcs
4pcs
TU0428TU0426
Carbon Battery Plate
2pcs
Carbon Front Shock Tower
1pcs
Carbon Rear Shock Tower
1pcs
TU0429
TU0423
Rear Arm Mount-Ball
8pcs
T04051 T04052 T04053 T04054T04050
T04055
TU0250-1
TU0250-6TU0250-5
TU0250-2 TU0250-3 TU0250-4
TU0250-7
TU0250-8
TU0250-10F TU0250-10R TU0262-F TU0262-R
TU0260-F TU0260-R
2.3 E-ring
2.3 E扣
4pcs
Side plate-Left
1pcs
Side plate-Right
1pcs
Battery Mount
1pcs
Antenna pipe mount
1pcs
4pcs
Rear Shock Absorber Body
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
4pcs
Below Spring mount end
3.1x5.5x2.0 Aluminium Washer
4pcs
Rear Piston-White
Front Piston-Black
2pcs
4pcs
1mm Washer-White
4pcs
1mm Washer-Black
4pcs
2.5mm Washer-White
4pcs
Spring
4pcs
2.8x1.9 O-Ring
4pcs
9x1 O-Ring
4pcs
12x1 O-Ring
4pcs
14x1.5 O-Ring
Front Shock Absorber Spring-Medium Rear Shock Absorber Spring-Medium Rear Shock Absorber Spring-SoftFront Shock Absorber Spring-Soft
Front Shock Absorber Spring-Hard
Rear Shock Absorber Spring-Hard
2pcs
2pcs
2pcs
2pcs2pcs
2pcs
2pcs
2pcs
T04057
2pcs
4.1x6x2.1 Washer
Bottom Cover
1pcs
T04058
3.1x5.5x1.0 Washer
2pcs
Page 28
4x7x2.5 Ball Bearing
M3 Screw
Front Gear-box
1pcs
1pcs
TR4002
Rear Gear-box
T04039
1pcs
1pcs
Upper Suspension Arm Mount
Steering Block
Left - 1pcs Right - 1pcs
Hex Mount
1.6x11 Spring Pin
4pcs
4pcs
Front Bumper
1pcs
Diff Connecting Cup-Long
1pcs
Diff Connecting Cup-Short
1pcs
3x51 Arm Pin
2pcs
6pcs
6pcs
TR4004 TR4006
T04035 T04037
Front
Rear
Servo Saver
Top - 1pcs
Bottom
Left 1pcs
1pcs
Servo Mount
1mm Spacer
2pcs
2pcs
2mm Spacer
2pcs
Steering Servo Horn
1pcs 1pcs 1pcs
Front Lower Arm
2pcs
Rear Lower Arm
Left-1pcs
Right-1pcs
Wing Brack
2pcs
Wing Angie Shim
2pcs
Wing Screw Washer
2pcs
Front Body Mount
1pcs
Fan Mount
1pcs
4.8mm Ball End - Long
7pcs
Wing-Lexan
1pcs
Body-Lexan
1pcs
3x40 Turnbuckle
3x45 Turnbuckle
5pcs
2pcs
Front CVD
2pcs
2pcs
Slipper pad
T04003 T04005 T04006 T04007
T04008 T04009 T04011 T04012 T04013
T04014 T04016 T04017 T04018 T04019
T04020 T04021 T04023 T04024
T04025 T04032
2x9.8 Pin
Slipper Spring
1pcs
Slipper Nut
1pcs
Slipper Hub-F
1pcs
Slipper Hub-R
1pcs
Mid Connecting Hub-F
Mid Connecting Hub-R
Center Shaft
1pcs
1pcs
1pcs
T04027 T04028 T04031
Spring Buckle
1pcs
T04022
Rear CVD
2pcs
Front Bearing Collar
2pcs
Rear Bearing Collar
2pcs
6pcs
M2.5x13 Fan Screw
4pcs
T04033
Diff Screw
Diff Nut
2pcs
2pcs
2pcs
4x1 O-ring
4x1 O环
3x48.5 Arm Pin
2pcs
T04034 T04036
T04038
1pcs
1pcs
Parts list for T4 off-road buggy - 2
Steering Rack
1pcs
T04004
Page 29
T02050
4pcs
5.8x6 Ball stud
1pcs
2.6x6x3 Stop push ball bearing
T02047 T02048
12pcs
2.37mm Ball
1pcs
Differential Spring
T02092
T02093
Ball stud-long
2pcs
Ball stud-short
5pcs
T02098
T02100
6pcs
5x10x4 Ball bearing
6pcs
5x8x2.5 Ball bearing
2.5x30 Arm Pin
2.3 E-ring
2.0 E-ring
10x12x0.2 Washer
M3x8 Screw
M3x5 Screw
M3x8 Screw
M3x10 Screw
M2.6x8 Screw
M3x12 Screw
M3x22 Screw
M2.5x4 Screw
M3x14 Screw
M3x10 Screw
Velcro Tape
13x19x0.8 Diff Washer
M3 Nut
Front Hub Carriers 10 Degree
Left - 1pcs
Right - 1pcs
Left - 1pcs Right - 1pcs
Front Hub Carriers 13 Degree
Rear Hub Carriers
1pcs 1pcs
Center Gear-box
1pcs
1pcs
1pcs
Supr Gear-85T
1pcs
Diff Gear-39T
1pcs
Diff Gear-16T
1pcs
Front Rim
2pcs
Rear Rim
2pcs
Front-tyre
2pcs
Rear-tyre
2pcs
Front Sponge
2pcs
Rear Sponge
2pcs
2pcs
2pcs
Servo Saver Body
Servo Saver Post
Servo Saver Spring
Servo Saver Nut
1pcs
1pcs
2pcs
1pcs
8pcs
8pcs
6pcs
1 Set
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
8pcs
TR4007 TR4008 TR4011 TR4016
TR4046TR4039
TR4033 TR4034 TR4035TR4032
TR4027
TR4028
TR4049 TR4053
TR4055 TR4056 TR4057 TR4058
TR4059
H481
T02031
2pcs
5.8 Ball End
Below Spring mount end
2pcs
T02062
H380
Fan
1pcs
T02099
6pcs
10x15x4 Ball Bearing
2pcs
Upper cover nylon cap
Ball stud sponge
2pcs
Ball stud sponge
5pcs
4pcs
M3x6 Screw
8pcs
TR4063
2pcs
2.8x1.9 O-ring
Parts list for T4 off-road buggy - 3
Aluminium Motor Gear-21T
1pcs
3x3 Screw
1pcs
Page 30
2pcs
2pcs
2pcs
T02084 T02086 T02087
3x7x0.8 Washer
10pcs
M4 Flanged Nylon Nut
M3 Nylon Nut
6pcs
Small clip
8pcs
6pcs
Antenna pipe
Antenna pipe
set cover
1pcs
1pcs
Double-sided tape
1pcs
T02081
5.1x8x0.2 Washer
6pcs
86000
Parts list for T4 off-road buggy - 4
Front Hub Carriers 10 Degree
Front Hub Carriers 13 Degree
TU0410 TU0413
1pcs
1pcs
1pcs 1pcs
4pcs
Washer
4pcs
Washer
Rear Hub Carriers
4pcs
Washer
2pcs
TU0422 TU0424
Steering Rack
1pcs
OP OP OP OP
Page 31
Date
Driver
Track / City
/
SETUP SHEET for the TeamC T4
Front Suspension
Ride height
Rear Suspension
/
Batteries
Shock Mounting&Camber link
Servo
Esc
Batteries
Motor
Conditions
Smooth Bumpy Low traction Med traction High traction
Sandy Soft dirt Grass Hard soil Clay
Notes
Motor
Pinion/Spur
Other
/
Wing
Wing Angle 4° 10°
Front Tires&Wheels
Spring(color)
Piston #
Oil wt
Front Tires
WheelsInserts
Rear Shocks
Rear Tires&Wheels
Rear Tires
WheelsInserts
Ride height
Shock Mounting&Camber link
Event
10°
13°
Caster
Bump Steep Spacer
Toe-in (+)/Out (-) °
Washers
Long
Medium
Short
Wheelbase
mm
Wet Dry Dusty Other
1
2
3
Comments
T4
1
2
1
2
1
2
3
1
2
1
2
1
2
1
2
mm
mm
Front Shocks
Black
Spring(color)
Piston #
Oil wt
Black
Anti-roll bar:
mm
Anti-roll bar:
mm
Camber
°
Camber
°
mm
mm
Page 32
Date
Driver
Track / City
/
SETUP SHEET for the TeamC T4
Front Suspension
Ride height
Rear Suspension
/
Batteries
Shock Mounting&Camber link
Servo
Esc
Batteries
Motor
Conditions
Smooth Bumpy Low traction Med traction High traction
Sandy Soft dirt Grass Hard soil Clay
Notes
Motor
Pinion/Spur
Other
/
Wing
Wing Angle 4° 10°
Front Tires&Wheels
Spring(color)
Piston #
Oil wt
Front Tires
WheelsInserts
Rear Shocks
Rear Tires&Wheels
Rear Tires
WheelsInserts
Ride height
Shock Mounting&Camber link
Event
10°
13°
Caster
Bump Steep Spacer
Toe-in (+)/Out (-) °
Washers
Long
Medium
Short
Wheelbase
mm
Wet Dry Dusty Other
1
2
3
Comments
T4
1
2
1
2
1
2
3
1
2
1
2
1
2
1
2
mm
21
mm
Front Shocks
Black
Spring(color)
Piston #
Oil wt
Black
Anti-roll bar:
mm
Anti-roll bar:
mm
Camber
°
Camber
°
-1
0
-1
0
450
STD
STD
400
-2
4000KV
21 85
6.5”
22
23
mm
28.5
mm
Page 33
HOBBYPRO COMPANY LTD.
Flat C-D, 5/F.,
Speedy Ind. BLDG.,
114 How Ming Street,
Kwun Tong, KLN., Hong Kong.
Team C Headquarter
www.teamcracing.net
Team C America
www.teamcamerica.com
Team C Europe
www.teamceurope.com
Loading...