Teac LE43A718UHD, LE49A718UHD, LE65A718UHD, LE55A718UHD, LE32A318HD User Manual

...

USER MANUAL

WARRANTY INFORMATION INSIDE. PLEASE READ

www.teac.com.au

IMPORTANT

Trademark of TEAC Corporation JAPAN

A7 Series Smart LED TV

LE43A718UHD

LE49A718UHD

LE55A718UHD

LE65A718UHD

ARR

NTY PROCEDURE

v 1

7.1

: L

ED T

: July

2017

ease

ead

he o

wner’s manual

aref

ully and

nsur

e that you have followed the correct installation and operating procedures.

1. Pl

ease

read this warranty

ard.

2. K

eep

your purchase receipt to enable you to proceed quickly in the event of a Warranty Service

3. I

f y

u require Warranty Service, please contact the TEAC

arra

ty Service

otl

ne at 1300 553 315 for assistance. Please ensure

hat

you have the model nu

ber,

serial number and purchase receipt

ead

hen

you call.

eas

omp

ete the section below and

eep

this information for your own records.

wner

’s Name

wner

’s Address

ost

ode

odel

Name/No. Serial No.

eale

r’s Name

eale

r’s Address

ost

ode

hank you

for selecting a TEAC product

f y

ur TEAC product malfunctions

ase call us directly for

arran

y support

etw

en Monday to Friday at

.30

AM – 5PM A

EST at t

EAC Warranty

Service

otline

1300 5

53 315

or ot

her enquiries,

lease

w.tea

c.com.au

hen

calling to receive warranty service, please have:

1. Yo

ur m

odel and serial number

2. Pr

oof

of purchase

3. A

nd y

our product in front of you

OTE

- Yo

u are

required to

rovid

copy

of your

roof

of purchase

n ord

er to have your claim

rocess

- Pl

eas

read the Terms and Conditions for details of your warranty entitlement.

ERMS

ND CONDITIONS

v 1

7.1: LED

: July 2017

ur g

oods come with guarantees that cannot be

xclu

ded under the Australian Consumer Law. You are entitled to a

epla

cement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You

re a

lso entitled to have the goods repaired or replaced if the goods

ail

to be of acceptable quality and the failure does not

mou

t to a major failure.

1. T

EAC w

rrants that this product is free from defects in material and workmanship under normal domestic use with reasonable ca

e a

d skill.

ain

enance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only

ppl

es to TEAC pr

duc

s purchased

rom a TEAC Authori

d R

tailer

n A

stralia.

his

warranty only applies to the original purchaser and cannot be transferred.

2. T

he b

enefits to the consumer given by this Warranty are in addition to other rights and remedies of the cons

mer

under a law in relation to

oods

or services to which the warranty relates, being the Australian Consumer Law.

3. R

efu

d or replacement via your

EAC Au

hori

d R

tailer

s a

ailable for a period of 14 days after purchase for goods that have been

nsp

nd determined to have a major failure. Refund and exchange is not applicable for change of mind.

4. Su

bje

t to the terms herein, this warranty effectively covers

EAC p

oduct

luding products purchased for commercial purposes,

pec

fied in the Warranty

erio

abl

below from the date of purchase.

EAC P

RODUCT

xclu

ding commercial use products

ZE (TV)

ARRA

NTY PERIOD

om date

of purchase

ARRA

NTY SERVICE TYPE

ED/L

D TV*

19” to 50”

36 m

onth

thor

ised Service Centre Service

51”

and

above

2 months

In-h

ome

service**

3 t

ont

tho

ised Service Centre Service

5. *Ap

plic

able to

Vs pu

rchased from July 1st 2017.

onta

ct customer care on 1300 553 315

f yo

u wish to confirm the warranty terms of your T

**I

n Ho

me Service/Pick up Service

his

service will only be provided as part of this warranty if all the following conditions are met;

a) The

duct is indicated in the Warranty Period Table.

b) T

roduct is within the warranty period.

c) T

roduct is located within the normal service area of the local TEAC Authorised Service Centre.

oof

of product

urcha

se is required. If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking

he p

roduct to a TEAC Authorised Service Centre.

thor

ised Service Centre Service

e pu

rchaser is required to send the product

t th

eir own expense

o th

e nearest TEAC Authorised Service Centre for repair. In this event,

roof

of purchase is required to support a warranty claim. After the repair, the product will be available for collection by

r ret

urn to the

urch

ser at a fee

pon

request. TEAC in

-h

ome

service can be made available at a fee upon request.

6. A 12-m

onth

replacement warranty is applicable to all Accessories such as Remote

Pow

er Adapt

ers

and

Cables.

7. T

EAC wi

ll ensure to the best of its abilities that all required

arts

are made available for any required service/repair.

8. T

EAC Aus

tralia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product repairs within a

easo

nable

erio

d based on available resources and workload during the

ime

when service is requested and performed.

9. R

efurb

ished parts may be used to repair the product. In the case of a replacement, the product may be replaced, with a refurb

shed

unit of the

ame

type or, if one is unavailable, a similar refurbished model

ith

equal or better features

nd spec

fications.

10. Pl

ease

be advised that if the product presented for repair is capable of retaining user

-g

ener

ated data, the data may be lost during servicing.

usto

mers are strongly encouraged to back up all important inf

rmat

ion/data before sending the product in for service/repair.

11. S

ervi

ce will be provided only during normal business hours and under safety conditions and circumstances. TEAC and its author

sed

service

gent

s can refuse any repair if safety, in relation t

OH&S

, becomes a concern to its staff or authorised service agents’ personnel.

12. T

he w

arranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:

a) T

roduct was not transported, installed, operated or maintained accor

ing

to manufacturer instruction, or

b) T

he p

roduct was abused, damaged, tampered, altered or repaired by any unauthorised persons, or

c) Pr

oduc

t failure is due to accidents during use, installation

r tr

ansit, power surges, use of defective or incompatible

xtern

al devices, exposure

o ab

normal conditions such as excessive temperatures or humidity, or entry of liquids, object

or c

reatures into the product,

ockr

oach

nfes

tations,

d) T

he c

ustomer is unable to provide proof o

f p

urcha

f th

e product for ver

fica

tion, or

e) T

he s

erial number of the product is missing or has been tampered with.

13. W

her

any repairs or services required that are outside of the terms and conditions of this Warranty are requested by the cus

ome

or where

fau

lt is determined to be o

tsid

e of the terms and conditions of the Warrant

the

customer shall be charged for the cost of the

epai

14. N

o on

e is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of

ny e

quipment

ther than

as stated in this warranty and outlined above.

15. T

EAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed

by c

usto

mers/retailers.

16. L

CD d

ead pixel policy, please contact TEAC

at s

uppo

rt@teac.com.au

or as

sistance.

1



Table of Contents

TOPIC PAGE

Safety Information ………………………………………………………………………………2

Product Overview ……………………………………………………………………………….5

Basic Operations ………………………………………………………………………………..6

Remote Control ………………………………………………………………………………….9

Connections ……………………………………………………………………………………...10

TV Operation ………………………………………………………….………………………...12

USB Media Playback …………………………………………………...……………………...14

PVR Recording …………………………………………………………….…………………...15

Menu Contents and Descriptions ………………………………………………………..…...17

Advanced Controls ……………………………………………………...……………………...20

Internet Connectivity ……………………………………………………………………….…...22

Audio Video Sharing …………………………………………………………………….……...26

Internet Portal ………………………………………………………………….………………...27

HBBTV System ……………………………………………………………..…………………...28

Smart Center …………………………………………………………………..………………...30

Upgrade and Troubleshooting …………………………………………….…………………...33

Specifications ………………………………………………………………….………………...34

2



Safety Information

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT - Please read these instructions fully before installing or operating

In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby or switched off.

Note: Follow the on screen instructions for operating the related features.

WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 2000 meters above the sea level, in dry locations and in regions with moderate or tropical climates.

• The TV set is intended for household and similar general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free space around the TV.

• The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord.

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel.

• Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).

• Do not expose the TV to direct sunlight, or open flames such as lit candles beside the TV.

• Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined surfaces.

• To avoid danger of suffocation, keep plastic bags out of the reach of the babies, children and domestic animals.

• Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with hazardous or flammable materials.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Caution 

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance component

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.

3



Class II Equipment: This appliance is designed in such a way that it does not require a safety

connection to electrical earth. Class II Equipment With Functional Earthing: This appliance is designed in such a way that it does not require a safety connection to electrical earth, the earth connection is used for functional purposes. Protective Earth Connection: The marked terminal is intended for connection of the protective earthing conductor associated with the supply wiring.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal

operating conditions. Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.

Class 1 Laser Product: This product contains Class 1 laser source that is safe under reasonably foreseeable conditions of operation.

WARNING

Do not ingest the battery: Chemical Burn Hazard

Never place a television set in unstable or inclined locations. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as;

• Using cabinets or stands recommended by the manufacturer of the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the supporting furniture.

• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

• Not standing the television set on cloth or other materials placed between the television and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

• Read the instructions before mounting your TV on the wall.

• The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined wall.

• Use the specified wall mounting screws and other accessories.

• Tighten the wall mounting screws firmly to prevent the TV from fall. Do not over-tighten the screws.

Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing – and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator).

4



WARNING

Large TVs are fall hazards. You should use furniture straps to fix the TV to the wall and/or the entertainment cabinet, to avoid risk of injury or death due to a falling TV. (Anti-tip TV/furniture straps sold separately)

Environmental Information

This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps:

If you set Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (located under the Energy Saving setting) manually using Left or Right buttons on the remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending on the selected Mode in the System>Picture menu.

The Energy Saving settings can be found in the System>Picture menu. Note that some picture settings will be unavailable to be changed. If Right button is pressed while Auto option is selected or Left button while Custom option is

selected, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select Proceed and press OK to turn the screen off immediately. If you don’t press any button, the screen will be off in 15 seconds. Press any button on the remote or on the TV to turn the screen on again.

Note: Screen Off option is not available if the Mode is set to Game.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

YouTube and the YouTube logo are trademarks of Google Inc. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS, Inc.

5



For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc.

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

6



Product Overview

• TV supports Ultra HD (Ultra High Definition - also known as 4K) which provides resolution of 3840 x 2160 (4K:2K). It equals 4 times the resolution of Full HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically. Ultra HD contents are supported from HDMI, USB inputs and over DVB-T2 and DVB-S2 broadcasts.

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV (DVB-T-T2/C)

• HDMI inputs to connect other devices with HDMI sockets

• USB input

• OSD menu system

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

• Programme recording

• Programme timeshifting

• Ethernet (LAN) for Internet connectivity and service

• 802.11 a/b/g/n built in WIFI Support

• Audio Video Sharing

• HbbTV

•

High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG):

Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several different exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic color and other improvements. It delivers the look that filmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG contents are supported via native and portal applications, HDMI, USB inputs and over DVB-S broadcasts. Set the related HDMI source input as

Enhanced

from the

Sources

option in the

Settings

menu in order to watch HDR/HLG images, if the HDR/HLG content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case.

•

Dolby Vision:

Dolby Vision™ delivers a dramatic visual experience, astonishing brightness, incomparable contrast, and captivating color, that brings entertainment to life. It achieves this stunning image quality by leveraging breakthrough HDR and wide color gamut imaging technologies. By increasing the brightness of the original signal and using a higher dynamic color and contrast range, Dolby Vision presents stunning, true-to-life images with amazing amounts of detail that other post-processing technologies in the TV aren’t able to produce. Dolby Vision is supported via native and portal applications, HDMI and USB inputs. In the

System>Picture>Mode

menu two predefined picture modes will be available if Dolby Vision

content is detected:

Dolby Vision Bright

and

Dolby Vision Dark

. As of their names indicate, you may experience the content as the creative intended, with bright and dark options, considering the ambient luminance.

7



Accessories Included

1. Remote Control

2. Batteries: 2 x AAA

3. Instruction Book

Standby Notifications If the TV does not receive any input signal (e.g. from an aerial or HDMI source) for 3 minutes, it will go into standby. When you next switch-on, the following message will be displayed: “TV switched to stand-by mode automatically because there was no signal for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated for a while it will go into standby. When you next switch-on, the following message will be displayed. “TV switched to stand-by mode automatically because no operation was made for a long time.” Press OK to continue.

8



Basic Operations

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a wall socket (220-240V AC, 50 Hz). To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a numeric button on the remote control.

• Or, press the side function switch on the TV until the TV comes on from standby.

To Switch the TV Off

• Press the Standby button on the remote control

• Or press the side function switch on the TV until the TV switches into standby mode

To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK.

On the next screen, set your preferences using the directional buttons.

Note:

Depending on the

Country

selection you may be asked to set and confirm a PIN at this point. The selected PIN cannot be 0000. You have to enter it if you are asked to enter a PIN for any menu operation later.

About Selecting Broadcast Type

Digital Aerial:

Digital Aerial

broadcast search option is turned on, the TV will search for digital

terrestrial broadcasts after other initial settings are completed.

Digital Cable:

Digital Cable

broadcast search option is turned on, the TV will search for digital cable broadcasts after other initial settings are completed. According to your other preferences a confirmation message may be displayed before starting to search. Select

YES

and press OK to

proceed. To cancel operation, select NO and press OK. You can select

Network

or set values such

Frequency, Network ID

and

Search Step

. When finished, press OK button.

Note:

Searching duration will change depending on the selected

Search Step

Analogue:

Analogue

broadcast search option is turned on, the TV will search for analogue

broadcasts after other initial settings are completed. Additionally you can set a broadcast type as your favourite one. Priority will be given to the selected

broadcast type during the search process and the channels of it will be listed on the top of the

Channel List

. When finished, press OK to continue.

You can activate

Store Mode

option at this point. This option will configure your TV’s settings for store environment and depending on the TV model being used, the supported features of it may be displayed on the top of the screen as an info banner. This option is intended only for store use. It is recommended to select

Home Mode

for home use. This option will be available in

System>Settings>More

menu and can be turned off/on later.

Depending on the model of your TV and the country selection

Privacy Settings

menu may appear at this point. Using this menu you can set your privacy privileges. Highlight a feature and use Left and Right directional buttons to enable or disable. Read the related explanations displayed on the screen for each highlighted feature before making any changes. You can use

Programme +/-

buttons to scroll up and down to read the entire text. You will be able to change your preferences at any time later from the

Settings>Privacy Settings

menu. If the

Internet Connection

option is disabled

9



Network/Internet Settings

screen will be skipped and not displayed. If you have any questions,

complaints or comments regarding this privacy policy or its enforcement, please contact by email at smarttvsecurity@vosshub.com.

Press OK button on the remote control to continue and the

Network/Internet Settings

menu will be displayed, if you confirm the previously displayed message asking whether you want to do the network settings. Please refer to

Connectivity

section to configure a wired or a wireless connection.

If you want your TV to consume less power in standby mode, you can disable the

Wake On

option by

setting it as

Off

. After the settings are completed press OK button to continue. To skip to the next step without doing anything select No and press the OK button when the message is displayed asking whether you want to do the network settings.

After the initial settings are completed TV will start to search for available broadcasts of the selected broadcast types.

After all the available stations are stored, scan results will be displayed. Press OK to continue. The

Edit Channel List

menu will be displayed next. You can edit the channel list according to your

preferences or press the

button to quit and watch TV.

While the search continues a message may appear, asking whether you want to sort channels according to the LCN

(*)

. Select

Yes

and press

to confirm

(*)

LCN is the Logical Channel Number system that organizes available broadcasts in accordance

with a recognizable channel number sequence (if available).

Note: Do not turn off the TV while initializing first time installation. Note that, some options may not be available depending on the country selection.

TV Control Switch & Operation

1. Up direction

2. Down direction

3. Volume / Info / Source

selection and Standby-On switch

The Control button allows you to control the Volume / Programme / Source and Standby-On functions of the TV. To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down. To change channel: Press the middle of the button, the information banner will appear on the screen. Scroll through the stored channels by pushing the button up or down. To change source: Press the middle of the button twice (for the second time in total), the source list will appear on the screen. Scroll

through the available sources by pushing the button up or down. To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode. Notes:

• If you turn the TV off, this circle starts again beginning with the volume setting.

• Main menu OSD cannot be displayed via control button.

Operation with the Remote Control Press the Menu button on your remote control to display the main menu screen. Use the directional buttons to select a menu tab and press OK to enter. Use the directional buttons again to select or set an item. Press Return/Back or Menu button to quit a menu screen.

Input Selection Once you have connected external media devices to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different sources.

Changing Channels and Volume

10



You can change the channel and adjust the volume by using the Volume +/- and Programme +/- buttons on the remote.

Inserting the Batteries into the Remote Remove the screw that secure the battery compartment cover on the back side of the remote control first. Remove the cover gently. Insert two AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on. Then screw the cover back on again.

Connect Power IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. After unpacking,

allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Antenna Connection Connect the aerial or cable TV plug to the AERIAL INPUT (ANT) socket located on the back of the TV.

11



Remote Control

1. Source:

Shows all available broadcast and content

sources

2. Netflix:

Launches the Netflix application, if this feature is

supported by your TV

3. YouTube:

Launches the YouTube application

4. Play:

Starts to play selected media

5. Record:

Records programmes

6. Rapid reverse:

Moves frames backwards in media such

as movies

7. Language:

Switches between sound modes (analogue TV), displays and changes audio/subtitle language (digital TV, where available)

8. Red button

9. Green button

10. Numeric buttons:

Switches the channel, enters a number

or a letter in the text box on the screen

11. TV:

Switches to TV Source

12. Menu:

Displays TV menu

13. Internet:

Opens the portal page, where you can reach

many web based applications

14. Volume +/-

15. Back/Return:

Returns to previous screen, opens index

page (in TXT mode)

16. Favourites:

Displays user specified favourite channels

17. Screen:

Changes the aspect ratio of the screen

18. My button 1 (*)

19. My button 2 (*)

20. Text:

Displays teletext (where available), press again to

superimpose the teletext over a normal broadcast picture (mix)

21. EPG (Electronic programme guide):

Displays the

electronic programme guide

22. Mute:

Completely turns off the volume of the TV

23. Info:

Displays information about on-screen content

24. Exit:

Closes and exits from displayed menus or returns to

previous screen

25. OK:

Confirms user selections, holds the page (in TXT

mode), views channel list (DTV mode)

26. Programme + / -

27. Directional buttons:

Helps navigate menus, content etc.

and displays the subpages in TXT mode when pressed Right or Left

28. Quick Menu:

Displays a list of menus for quick access

29. Swap:

Quickly cycles between previous and current

channels or sources

30. Yellow button

31. Blue button

32. Subtitles:

Turns subtitles on and off (where available)

33. Rapid advance:

Moves frames forward in media such as

movies

34. Stop:

Stops the media being played

35. Pause:

Pauses the media being played, starts timeshift recording

36. Media browser:

Opens the media browsing screen

37. Standby: SwitchesOn / Off the TV

(*) MY BUTTON 1 & MY BUTTON 2: These buttons may have default functions depending on the

model. However you can set a special function to these buttons by pressing on them for five seconds when on a desired source or channel. A confirmation message will be displayed on the screen. Now the selected MY BUTTON is associated with the selected function.

Note that if you perform First Time Installation, MY BUTTON 1&2 will reset to their default function.



12



Connections

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them.

+ 36 hidden pages

Teac LE43A718UHD, LE49A718UHD, LE65A718UHD, LE55A718UHD, LE32A318HD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual