Teac 3290, CT-W3290-S Service Manual
TEAC
SERVICE MANUAL
1. Caution……………………………………………………………2
2. Specification………………………………………………………6
3. BOM List ……………………… ………………………………..10
4. Alignment Procedure…………………………………………….41
5. Block Diagram……………………………………………………45
6. Schematic Diagram……………………………………………….46
7. PCB Layout………….…………………………………………….47
8. Explode View Diagram……………………………………………49
This manual is the latest at the time of printing, and does not
include the modification which may be made after the printing, by
the constant improvement of product.
3290
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
RISK RISK OF OF ELECTRIELECTRICC
SHOCK SHOCK DO DO NOT NOT OPEN.OPEN.
2
dangerous
3
FOR YOUR PERSONAL SAFETY
1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a car t or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and car t combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Save these instructions for later use. Follo w all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions- All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
IMPORTANT SAFETY INSTRUCTIONS
4
PROTECTION AND LOCATION OF YOUR SET
11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
PROTECTION AND LOCATION OF YOUR SET
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
OPERATION OF YOUR SET
18.
This television set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
IF THE SET DOES NOT OPERATE PROPERLY
21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
FOR SERVICE AND MODIFICATION
24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.
25. When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any ser vice or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
5
off
APAC PFS
Date: 5-NOV-2004
ProductView......:
Report by............:
Specs / Chassis
MasterData
Customer Id
TEAC
Version
1.0
Status
Locked
BOM No.
03-3290C5-AA1
Brand
TEAC
Rece
p
tion
+Tuning - presets/channels
100
+Tuning - technolo
gy
PLL FS TUNER
+Tuning - Indication
Freq.
+Freq Bands
Full-cable
+Channels
+IF Fre
q
38.9 MHz
+TV Systems Off Air
PAL B/G
+Add Systems Ext In
NTSC/PAL 60
+TV Systems Multi
PAL
+Sound Systems
AV STEREO, GERMAN
STEREO
Picture - Processin
g
+Scan
Standard
+Scan Modes
4:3/4:3 scaling/ zoom/
subtitle/16:9
+Wide Screen Switchin
g
+BLACK STRETCH,BLUE STRETCH
Yes(user control
)
+SVM
Yes
+LTI;CTI
+Combfilter
COMB-F, VM
+Picture Control
4 Picture Modes, Brightness,
Color, Contrast, Tint, Sharpness
bar,3 Color Temp. modes,
+Pict Enhancement
off/middle/high,Including black
stretch,blue stretch,dynamic
skin
+Pict Noise Reduction
Picture - Dis
play
+Display Type
CRT
+Screen Format
16:09
+Size(Visual)" - size/vis. cm
32“
+Deflection System (CRT onl
y)
1Fh
+Tube Technology (CRT onl
y)
+CRT Defl
+CRT Gun
Stand Gun
+CRT Magn field
+Resolution
+Coating (only for D.V. sets
)
+White Point
Sound
+Leaflet Power
12w
+RMS Power Intern
2x6w
+RMS Power Extern
+DVSS(virtual Dolby Surround Sound)
+Surround Sound
+ESS&EPS
YES
+Sound Features
Four sound modes,Volume,
Mute,AVL,Loudness,Equaliser,
Balance,DBB
Sound - S
p
eakers
+Speaker configuration
4 Speakers
+Speakers used
Normal range
+Speaker Size
User Interface
+Interface Name
+Voice Control
+Menu
Cursor Control
M68
3290
2004-11-5 16:21 3290 pfs 1 of 4
Date: 5-NOV-2004
ProductView......:
Report by............:
Specs / Chassis
M68
3290
+Menu Colours
Multi-coloured On Screen
Display for easy use
+Menu Lan
guag
es
English
+Special Features
parent guide(including channel
lock&child lock),channel name ,
channel swap,favorite channel ,
notebook,
calendar,game,rotation
+Operational Features
Recall.
+PP Features
One PP for all channels
+Tuning/Install Features
auto search,manual ,fine
tune,skip,Hotel mode(including
lock menu
)
+Clock/Timer Functions
clock,timer on/off,sleep time
+Local Controls Front
+Local Controls To
p
+Indicators - screen
y
es
+Indicators - front
SB LED
+Numb of Loc Cont (incl Mains
)
8
+Number of Ind. (incl Mains
)
+Local Controls (Old)
Channel +/-, Vol +/,TV/AV,menu, Auto search
,p
ower switch
Remote Control
+Remote Control - sco
p
e
TV
+Remote Control - type
Q
+Remote Control - typenr
+Remote Control - features
Connectors Rear
+Scart RGB+Y/C+CVBS
+Scart RGB+CVBS in/out(full
)
+Scart CVBS+Y/C
+Component In (Y/U/V) Cinch
X
+In Y/C+Cinch(CVBS+St
)
X
+In Y/C+Cinch(CVBS+Mo
)
+In Y/C+Cinch(St
)
+In BNC (CVBS
)
+In Cinch(CVBS+St
)
+In Cinch(CVBS+Mo
)
+Out Cinch(CVBS+St
)
X
+Out Cinch(CVBS+Mo
)
+Out Cinch Audio Stereo
+Out Cinch Audio Mono
+Out Cinch Dolby Surround
+Dig Audio Out
+Loudspeakers
+Control Busses
+Feature Slot
+ITV Smart Port
+Terr. Antenna in
75 Ohms (IEC type
)
Guide + IR Blaster Jack
Connectors Front
+In Cinch (CVBS + St
)
+In Cinch (CVBS+Mo
)
+Headphone Out
Connectors Side
+In Y/C + Cinch(CVBS+St
)
+In Y/C + Cinch Stereo
+In Cinch (CVBS + St
)
X
+IN Cinch (CVBS + Mo
)
+Headphone Out
Connectors To
p
Connectors Mechanical
Stylin
g
+Cabinet Name
3290
+Configuration
+Graphics/Logo's
TEAC
2004-11-5 16:21 3290 pfs 2 of 4
Date: 5-NOV-2004
ProductView......:
Report by............:
Specs / Chassis
M68
3290
+Cabinet Colour and Finish
+Mechanics
+Speaker Visibilit
y
General
+Chassis
M68
+Software Delivery Mode
+Software Version
+Mains Voltage
180v-240v
+Mains Frequenc
y
50/60Hz
+Type Mains Cord
Power Consumption (P)TV in On
Power Consumption SB in Watts
less than 1w
Power Consumption Semi SB in W
+Power in "ON" for
+Power in Standby for
+Power in "OFF" for
Weight (P)TV (incl. Packagin
g)
Weight (P)TV (excl. Package
)
Weight AVUnit excl Packagin
g
+INDICATION on BACKCOVER
+Channel
Final Equipment
+Packaging - methods
+Documents and manuals
DFU
+Languages DFU
English
+Cables Supplied
+Antenna Supplied
+Stand Supplied
+Aux Equipm Supplied
Batteries for RC (2xAA
)
Packaging - width cm
Packaging - height cm
Packaging - depth cm
Miscellaneous
+EAN Indication
+Approbation
CB,EMC,SAA
+Tests
+Local Integration
Various Perf. Param.
+Service Call-Rate
PIP/POP
+Type
+Features
Digital Reception
+Transmission
Built-in Data System
+Text Standard
+(Tele)text Features
+Nbr bckgrnd page / Mem Size
+Text Technolo
gy
+Digital Data handlin
g
+Program Guide
Built-in Clock/Timer
+Type
+Features
Built-in Radio
+Type
Built-in PC displa
y
+PC Synch
+PC Control
Built-in DVD drive
+Type of Medium
+Type of Deck
Phased Out Items
+Tuner/Frontend
+Sensitivit
y
+CRT EHT
+Lightning Protection
+Account
2004-11-5 16:21 3290 pfs 3 of 4
Date: 5-NOV-2004
ProductView......:
Report by............:
Specs / Chassis
M68
3290
+XX(Radio Antenna in
)
+Non Volatile Memor
y
+In Y/C + Cinch(CVBS+Mo
)
Version of deck
2004-11-5 16:21 3290 pfs 4 of 4
Item No. Description Quantity Req. Designator Remarks
08-3290C5-AVY 1
46-39136H-07X 7P 2468#24/1185#26 550 TJC3-7Y/SCN-7Y 1 P003D FOR M.BD P921
47-RCA152-XX0 RCA SOCKET AV-3.2-3WK-038 1 P941
40-3290A5-FVB1X P.C.B. FRONT AV BD 1
63-W30100-AB4 S/T SCREW W 3 X 10 AB 3
08-3290C5-CRY 1
10-1N4004-EBX DIODE IN4004 (RECTIFIER) 1 D540
11-0BF422-0BX TRANSISTOR BF422 (NPN) 126 1 Q512
11-0BF422-0BX TRANSISTOR BF422 (NPN) 126 1 Q522
11-0BF422-0BX TRANSISTOR BF422 (NPN) 126 1 Q532
11-0BF423-0BX TRANSISTOR BF423 (PNP) 126 1 Q513
11-0BF423-0BX TRANSISTOR BF423 (PNP) 126 1 Q523
11-0BF423-0BX TRANSISTOR BF423 (PNP) 126 1 Q533
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q511
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q521
11-SC4544-0AX TRANSISTOR 2SC4544 1 Q531
18-BE0152-KFX RES C.C. 1.5K OHM 1/2W +/-10% 1 R541
18-CD0102-JNX RES. C.F. 1k OHM 1/4W +/-5% 1 R501
18-CD0225-JNX RES. C.F. 2.2M OHM 1/4W +/-5% 1 R540
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R518
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R526
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R528
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R536
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R538
18-FE0102-JNX RES. M.O. 1K OHM 1/2W +/-5% 1 R519
18-FE0102-JNX RES. M.O. 1K OHM 1/2W +/-5% 1 R529
18-FE0102-JNX RES. M.O. 1K OHM 1/2W +/-5% 1 R539
18-FF0330-JGX RES. M.O. 33 OHM 1W +/-5% 1 R505
18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R515
18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R525
18-FG0153-JHX RES. M.O. 15k OHM 2W +/-5% 1 R535
19-BB0100-JTX RES. SMD 10 OHM 1/10W +/-5% 1 R514
19-BB0100-JTX RES. SMD 10 OHM 1/10W +/-5% 1 R524
19-BB0100-JTX RES. SMD 10 OHM 1/10W +/-5% 1 R534
19-BB0103-JTX SMD. RES 10k OHM 1/10W +/-5% 1 R512
10
Item No. Description Quantity Req. Designator Remarks
19-BB0103-JTX SMD. RES 10k OHM 1/10W +/-5% 1 R522
19-BB0103-JTX SMD. RES 10k OHM 1/10W +/-5% 1 R532
19-BB0271-JTX SMD. RES 270 OHM 1/10W +/-5% 1 R513
19-BB0271-JTX SMD. RES 270 OHM 1/10W +/-5% 1 R523
19-BB0271-JTX SMD. RES 270 OHM 1/10W +/-5% 1 R533
19-BB0470-JTX SMD. RES 47 OHM 1/10W +/-5% 1 R511
19-BB0470-JTX SMD. RES 47 OHM 1/10W +/-5% 1 R521
19-BB0470-JTX SMD. RES 47 OHM 1/10W +/-5% 1 R531
19-BB0561-JTX SMD. RES 560 OHM 1/10W +/-5% 1 R517
19-BB0561-JTX SMD. RES 560 OHM 1/10W +/-5% 1 R527
19-BB0561-JTX SMD. RES 560 OHM 1/10W +/-5% 1 R537
25-BLA100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C540
25-BLA220-M1X CAP. ELEC 22 UF 250V +/-20% 1 C503
26-AMK102-KRX CAP. CER 1000 pF 2KV +/-10% R 1 C505
27-AGQ333-J0X CAP. M.PP 0.033 UF 250V +/-5% 1 C504
28-BB0331-JCX SMD. CAP 330PF 50V +/-5% 1 C511
28-BB0331-JCX SMD. CAP 330PF 50V +/-5% 1 C521
28-BB0331-JCX SMD. CAP 330PF 50V +/-5% 1 C531
28-BL0102-KBX SMD. CAP 1000pF 250V +/-10% 1 C512
28-BL0102-KBX SMD. CAP 1000pF 250V +/-10% 1 C522
28-BL0102-KBX SMD. CAP 1000pF 250V +/-10% 1 C532
34-R100K2-1BX COIL CHOKE 10 UH +/-10% 1 L501
46-10967W-01X PIN BASE *1 TJC1-1A 1 P504
47-CRT011-XX0 CRT SOCKET GZS10-208(DR) 1 P500
41-WJ0125-B00 WIRE BARE JUMPER 12.5MM 1 J503
18-CD0471-JNX RES. C.F. 470 OHM 1/4W +/-5% 1 R516
18-CD0470-JNX RES. C.F. 47 OHM 1/4W +/-5% 1 R502
46-37033H-05X HS 5P 2468#24 320 TJC3-5Y/SCN 1 P503
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D511
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D521
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D531
46-31795H-04X HS 550 TJC3-4Y/SCN-4Y 2(N) 1 P502
08-3290C5-FCN 1
02-GND032-XX0 1
18-CD0106-JNX RES. C.F. 10M OHM 1/4W +/-5% 1 R1
11
Item No. Description Quantity Req. Designator Remarks
25-DFB109-M1X CAP. ELEC 1 UF 50V +/-20% NP 1 C1
25-DFB109-M1X CAP. ELEC 1 UF 50V +/-20% NP 1 C2
36-DEG340-XX0 DEGAUSSING COIL 3910MM 1
36-ROT002-XX0 ROTARY COIL 600mm 1
41-BF0450-0BB WIRE UL1007#24 450 BLACK 1 FOR R1
41-TF0270-9CC WIRE UL 2468 #24 270MM RD WH 2 FOR HI-SPK - MI-SPK
42-12008H-XX1 SPEAKER 8 OHM 15W 120MM 1 SP601
42-12008H-XX1 SPEAKER 8 OHM 15W 120MM 1 SP602
42-G3508F-XX2 SPEAKER 8 OHM 8W 1 SP601A
42-G3508F-XX2 SPEAKER 8 OHM 8W 1 SP602A
44-32RFLS-LG1A 32 INCH 16:9 CRT W76QEP257X53 1 CRT01
46-14026H-02X HS 2P 2468#22 570mm S11-2Y/7mm 1 P601H FOR M.BD P601
46-27580H-02X HS 2P22 600/7 TJC3-2Y 1 P602H FOR M.BD P602
46-35102H-03X HS 2P 2468#22 200/5 TJC3-3Y 1 FOR VM BD P703
48-DAM002-XX0 DAMPTED SHAFT 2N-2 2
48-LOC002-XX0 SW. DOOR LOCK PR5 1
54-113970-0U0 PVC TUBE #5 L=ROLL 0.24 FOR P604 & P605
54-237930-0X0 HEAT SHRINKABLE TUBE 5*0.25 0.03 FOR R1
54-237930-0X0 HEAT SHRINKABLE TUBE 5*0.25 0.06 FOR HI-SPEAKER
54-314740-0X0 CRT FIBRE SHEET (22mmX22mmX0.8mm) 12 FOR CRT & F. CAB.
54-314740-0X0 CRT FIBRE SHEET (22mmX22mmX0.8mm) 4 STICK BETWEEN CRT AND UNDERPROP
54-314740-0X0 CRT FIBRE SHEET (22mmX22mmX0.8mm) 8 FOR CRT & F.CAB
54-343300-0X0 HEAT SHRINKABLE TUBE 3 X 0.25 0.03 FOR R01
54-344960-000 WOOFER SPONGE (255mmX20mmX18mm) 2
54-377380-000 SPONGE OF WOOFER FIXED POSITION 2 STICK ON WOOFER
55-326470-0HD LEFT TOP CABINET (WOOFER) 1
55-326480-0HD RIGHT TOP CABINET (WOOFER) 1
55-326490-0HD BOTTON CABINET (WOOFER) 2
55-3290FC-0CN1A FRONT CABINET 1
55-3290FD-0HN5C FRONT DOOR 1
56-301770-0HN5C HOLDER DOOR 2
56-326430-0HH1A LENS 1
56-3290FB-0HA5C PUSH BUTTON 1
56-3290LS-0HC5Z LED - SENSOR 1
56-3290PK-0HA5O POWER KNOB 1
12
Item No. Description Quantity Req. Designator Remarks
56-3290SL-0HN5C SPEAKER GRILLE (LEFT) 1
56-3290SR-0HN5C SPEAKER GRILLE (RIGHT) 1
57-10654X-00F cable ties(2.5mmX95mm) 1 FOR ROTATE COIL
57-10654X-00F cable ties(2.5mmX95mm) 2 FOR P601 & P602
57-10654X-00F cable ties(2.5mmX95mm) 4 .
57-29635X-00F cable ties(4.8mmX160mm) 2 FOR DEGAUSSING
58-3290FI-2UI1A INLAY FRONT CTL 1
59-130460-00X RUBBER PAD (25mmX7mm) 2 FOR FOOT
59-312950-000 RUBBER PAD 6
62-200980-0UN MOUNTING POST 2 STICK ON F.CAB
62-216340-0HA HOLDER AC POWER CORD (2) 1
62-227680-0UA BRACKET ABS-KINGFA 606 (UO) 1
62-265160-0HN POWER SW. ADAPTOR 1 FOR POWER SWITCH
62-301750-0HN RIGHT HOLDER(2) 1
62-301760-0HN LEFT HOLDER(2) 1
62-321780-0HG CRT COIL MTG 25"/29" 4 FOR CRT
62-326460-0HN SPEAKER HOLDER 2
63-B26080-AB4 S/T SCREW B 2.8 X 8 AB 4 MTG LENS-SENOR & LED TO FRONT CABINET
63-B26080-AB4 S/T SCREW B 2.8 X 8 AB 2 MTG VM BD
63-B30100-BT4 S/T SCREW B 3 X 10 BT 3 MTG PUSH BOTTON TO F.CAB
63-B40150-AB4 S/T SCREW B 4 X 15 AB 12 MTG TOP CAB.(WOOFER) TO BOTTOM CAB.(WOOFER)
63-B40150-AB4 S/T SCREW B 4 X 15 AB 8 MTG SPEAKER HOLDER TO TOP CAB. (WOOFER)
63-B40150-AB4 S/T SCREW B 4 X 15 AB 8 MTG SPEAKER TO TOP CAB.(WOOFER)
63-B40200-AB3 S/T SCREW B 4 X 20 AB 6 MTG SPEAKER HOLDER TO F.CAB
63-W30080-AB4 S/T SCREW W 3 X 8 AB 3 MTG KEY BD
63-W30120-AB4 S/T SCREW W 3 X 12 AB 4 MTG HI-SPEAKER TO F.CAB
63-Z60300-AB4 S/T SCREW HA 6X30 4 MTG CRT TO F.CAB
65-A50200-20E WASHER 5 X 20 X 2MM 6 MTG SPEAKER HOLDER TO F.CAB
67-X21679-0E0 SPRING CRT 6mmX50mmX0.6mm 2 FOR CRT GROUNDING WIRE
67-X25045-0E0 SPRING KNOB 1
65-A75200-20E WASHER 7.5mmX20mmX2mm MTG CRT 4 MTG CRT TO F.CAB
25-DFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% BP 1 FOR SP601
25-DFB229-M1X CAP. ELEC 2.2 UF 50V +/-20% BP 1 FOR SP602
08-3290C5-KEY 1
18-CB0221-JNX RES. C.F. 220 OHM 1/6W +/-5% 1 R023A
13
Item No. Description Quantity Req. Designator Remarks
18-CB0331-JNX RES. C.F. 330 OHM 1/6W +/-5% 1 R024A
18-CB0391-JNX RES. C.F. 390 OHM 1/6W +/-5% 1 R025A
18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R026A
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R028A
18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R027A
48-TAC001-XX0 TACT SWITCH 1 K002
48-TAC001-XX0 TACT SWITCH 1 K003
48-TAC001-XX0 TACT SWITCH 1 K004
48-TAC001-XX0 TACT SWITCH 1 K005
48-TAC001-XX0 TACT SWITCH 1 K006
48-TAC001-XX0 TACT SWITCH 1 K007
48-TAC001-XX0 TACT SWITCH 1 K008
46-39161H-05X HS 5P 2468#24 400mm TJC3-5Y/JC25-5Y 1 P001
14-LED03R-XX1 LED RED
3MM FO203 1 D001
18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R009
18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R008
25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C001
40-3290A5-KEB1X P.C.B. KEY BD 1
02-IRR001-XX0 IR RECEIVER MODULE HS0038A2 1 IR001
08-3290C5-PAN 1
72-3290A5-E121A OPERATION MANUAL 1
75-3290LL-CC0 POLYFOAM (LL) 1
75-3290LR-CC0 POLYFOAM (LR) 1
75-3290UL-CC0 POLYFOAM (UL) 1
75-3290UR-CC0 POLYFOAM (UR) 1
76-H32A90-0AT CARTON BOX 1
08-3290C5-PSY 1
10-0001H8-FBX DIODE 1H8 (FAST RECOVERY) 1 D860
10-0FR102-FBX DIODE FR102 (1A/100V) 1 D865
10-1N4007-EBX DIODE IN4007 1 D861
10-1N4007-EBX DIODE IN4007 1 D862
10-1N4007-EBX DIODE IN4007 1 D863
10-1N4007-EBX DIODE IN4007 1 D864
10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D867
10-1N5819-FBX DIODE 1N5819 (1A/40V) 1 D868
14
Item No. Description Quantity Req. Designator Remarks
11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q861
18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R865
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R892
18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R893
18-CB0512-JNX RES. C.F. 5.1k OHM 1/6W +/-5% 1 R864
18-CB0753-JNX RES. C.F. 75K OHM 1/6W +/-5% 1 R861
18-CB0912-JNX RES. C.F. 9.1K OHM 1/6W +/-5% 1 R863
18-CD0105-JNX RES. C.F. 1M OHM 1/4W +/-5% 1 R860
18-CD0229-JNX RES. C.F. 2.2 OHM 1/4W +/-5% 1 R862
25-BCA471-M1X CAP. ELEC 470 UF 16V +/-20% 1 C868
25-BFB109-M1X CAP. ELEC 1 UF 50V +/-20% 1 C864
25-BMG220-M1X CAP. ELEC 22UF 400V +/-20% 1 C861
26-ABC104-ZFX CAP. CER 0.1 UF 50V +80-20% F 1 C862
26-ABC104-ZFX CAP. CER 0.1 UF 50V +80-20% F 1 C867
26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C860
26-EBP122-KBX CAP. CER 1200pF 50V +/-10% 1 C865
26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C863
41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J861
41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J860
43-MITSH1-5DX RELAY SMIT-SH-105PM 1 K860
46-33079W-03X PIN BASE *3 TJC3-3A 1 P861
46-35184W-03X PIN BASE *3 TJC1-3A 1 P860
36-TRF165-AX0 TRANSFORMER CONV. BCK-1917 1 T860
13-TEA152-0PP IC TEA1520P 1 IC860
34-R101K2-1BX COIL CHOKE 100 UH +/-10% 1 L860
34-R101K2-1BX COIL CHOKE 100 UH +/-10% 1 L861
18-CB0513-JNX RES. C.F. 51k OHM 1/6W +/-5% 1 D866
25-BCA102-M1X CAP. ELEC 1000 UF 16V +/-20% 1 C866
26-APK102-ME4 CAP. CER 1000PF 400VAC+/-20% E 1 C894
10-HS6V2B-DBX DIODE 6V2 500mW 1 D890
63-W30100-AB4 S/T SCREW W 3 X 10 AB 2
40-3290SB-PWA1X POWER PCB BD 1 PCB
08-3290C5-PWY 1
10-0001H8-FBX DIODE 1H8 (FAST RECOVERY) 1 D810
10-0FR104-FBX DIODE FR104 (FAST RECTIFIER) 1 D825
15
Loading...