Page 1
December 2009 1 of 54
DTR 3002CU PVR
User Manual
Page 2
December 2009 2 of 54
Index
1. Installation .................................................................................................. 4
2. Remote Control ............................................................................................ 5
3. Installing the Batteries .................................................................................. 6
4. Setting Language ......................................................................................... 7
5. Setting Language ......................................................................................... 8
5.1 Setting Language ...................................................................................... 8
5.2 How to receive the programs? ..................................................................... 9
5.2.1 Auto Scan ................................................................................. 9
5.2.2 Manual Scan ............................................................................. 10
6. STB Operation ............................................................................................. 11
6.1 Main Menu ............................................................................................... 11
6.2 SETUP ..................................................................................................... 12
6.2.1 Installation ............................................................................... 12
6.2.1.1 Antenna Setting ................................................................ 12
6.2.1.2 Country Setting ................................................................. 12
6.2.1.3 OSD Language .................................................................. 12
6.2.1.4 Audio Language................................................................. 12
6.2.1.5 Subtitle Language .............................................................. 13
6.2.1.6 Time Zone ........................................................................ 13
6.2.1.7 Auto Scan ......................................................................... 13
6.2.1.8 Manual Scan ..................................................................... 13
6.2.2 TV Setup.................................................................................. 14
6.2.2.1 TV Format ........................................................................ 14
6.2.2.2 TV Mode ........................................................................... 14
6.2.2.3 OSD Transparency ............................................................. 14
6.2.2.4 Banner Display Time .......................................................... 14
6.2.2.5 Video Output..................................................................... 15
6.2.2.6 Video Enhancement ........................................................... 15
6.2.3 Password ................................................................................. 16
6.2.3.1 Channel Lock .................................................................... 16
6.2.3.2 Censorship Lock ................................................................ 16
6.2.3.3 Change Password .............................................................. 16
6.2.4 Advance Timer.......................................................................... 18
6.2.5 Data Transfer ........................................................................... 19
6.2.5.1 System Software Update .................................................... 19
6.2.6 Set Default ............................................................................... 20
6.3 TV/RADIO ................................................................................................ 21
6.3.1 List ......................................................................................... 21
6.3.1.1 Delete .............................................................................. 21
6.3.1.2 Skip ................................................................................. 22
6.3.1.3 Lock................................................................................. 23
Page 3
Rev 1.0 December 2009 3 of 54
6.3.1.4 Edit.................................................................................. 23
6.3.1.5 Favorites .......................................................................... 25
6.3.1.6 Search ............................................................................. 25
6.3.2 Guide ...................................................................................... 27
6.3.2.1 Book ................................................................................ 27
6.4 MULTIMEDIA ............................................................................................ 30
6.4.1 My Album ................................................................................ 30
6.4.1.1 Thumbnail ........................................................................ 31
6.4.1.2 Folder .............................................................................. 31
6.4.1.3 Zoom ............................................................................... 32
6.4.1.4 Rotate .............................................................................. 33
6.4.1.5 Slide Show ....................................................................... 34
6.4.2 My Music .................................................................................. 37
6.4.3 My Movie ................................................................................. 39
6.4.4 My Recorder ............................................................................. 39
6.4.4.1 Recording List ................................................................... 39
6.4.4.2 Recording Device ............................................................... 39
6.4.4.3 Recording Preference ......................................................... 40
6.5 GAME ...................................................................................................... 40
6.5.1 Gomoku ................................................................................... 41
6.5.2 Calendar .................................................................................. 41
6.5.3 Calculator ................................................................................ 42
6.6 Normal Play ............................................................................................. 43
6.6.1 Information .............................................................................. 43
6.6.2 Switch Program ........................................................................ 44
6.6.3 Program List ............................................................................. 44
6.6.4 Volume .................................................................................... 45
6.6.5 Pause ...................................................................................... 45
6.6.6 Audio ...................................................................................... 46
6.6.7 Favorites .................................................................................. 46
6.6.8 Teletext ................................................................................... 47
6.6.9 Subtitle.................................................................................... 48
6.6.10 Teletext Subtitle ........................................................................ 48
6.6.11 Guide ...................................................................................... 49
6.6.12 List ......................................................................................... 49
6.6.13 Browse .................................................................................... 49
6.6.14 Return ..................................................................................... 49
6.6.15 Message .................................................................................. 49
6.6.15.1 No Signal.......................................................................... 49
6.6.15.2 No Service ........................................................................ 50
6.6.15.3 Service Scrambled ............................................................. 50
6.6.15.4 Antenna Overload .............................................................. 51
6.6.15.5 HDTV not support .............................................................. 51
6.6.15.6 Locked ............................................................................. 52
7. Troubleshooting ........................................................................................... 53
8. Specifications .............................................................................................. 54
Page 4
Rev 1.0 December 2009 4 of 54
1. Installation
Page 5
Rev 1.0 December 2009 5 of 54
2. Remote Control
Page 6
Rev 1.0 December 2009 6 of 54
3. Installing the Batteries
Remove the battery cover from the remote control and put 2XAAA size batteries inside the
compartment.The diagram inside the battery compartment shows the correct way to install the
batteries.
Using the Remote Control
To use the remote control,point it towards the front of the digital set top box.The remote control has
a range of up to 7 metres from the set top box at an angle of up to 60 degrees.
The remote control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the remote control.
Page 7
Rev 1.0 December 2009 7 of 54
4. Setting Language
Caution:Make sure to check the voltage specification of the wall outlet is the same rating with the
receiver.To prevent the risk of electric shock, do not open the cover or the back of the receiver
Note: When connecting the receiver to other equipment,e.g.,TV,VCR and amplifier,make sure to refer
to relevant user manual for instruction.Also,make sure you disconnect all the equipments from the
mains supply before the connection.
Page 8
Rev 1.0 December 2009 8 of 54
5. Setting Language
5.1 Setting Language
User can select a preferred language among various languages at Installation page.
(1) Press <menu> button to enter Main Menu.
(2) Press <Left/Right> button to select SETUP option.
(3) Press <Up/Down> button to select Installation option.
(4) Press <OK> button to enter Installation page.
(5) Press <Up/Down> button to select OSD Language option.
(6) Press <Left/Right> button to select a language.
See Figure 1, 2. If there is no database (scan result) in the STB, it will start at step (5) when booting.
Figure 1. Main Menu, SETUP
Figure 2. Installation Page
Page 9
December 2009 9 of 54
5.2 How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs.
(1) Press <menu> button to enter Main Menu.
(2) Press <Left/Right> button to select SETUP option.
(3) Press <Up/Down> button to select Installation option.
(4) Press <OK> button to enter Installation page.
(5) Press <Up/Down> button to select Country Setting option.
(6) Press <Left/Right> button to set Country Setting.
(7) Press <RED/GREEN> button to Auto Scan or Manual Scan.
See Figure 1, 2. If there is no database in the STB, it will start at step (5) when booting.
5.2.1 Auto Scan
Auto Scan will erase the database first, and scans default frequency and bandwidth by Country
Setting. Follow the steps (1) ~ (6) at section 1.2..
(7) Press <RED> button to be confirmed to clear the database.
(8) Press <OK> button to confirm the database will be cleared and start Auto Scan.
It costs time to do Auto Scan, user can press <exit> to exit at anytime. See Figure 3, 4.
Figure 3. Clear database message
Figure 4. Auto Scan Page
Page 10
December 2009 10 of 54
5.2.2 Manual Scan
Manual Scan adds the scanning results into database, it doesn’t erase the database. But User has to
know the Frequency and Bandwidth for scanning. If user scans the same Frequency and
Bandwidth more then once, the programs will be duplicated. Follow the steps (1) ~ (6) at section
1.2..
(7) Press <GREEN> button to enter Manual Scan Page.
(8) Press <Up/Down> button to select Frequency option.
(9) Press <0~9> button to input the Frequency value.
(10) Press <Up/Down> button to select Bandwidth option.
(11) Press <Left/Right> button to set Bandwidth value.
(12) Press <OK/exit> button to start scan or exit.
See Figure 5, 6.
Figure 6. Manual Scan Result
Figure 5. Manual Scan Page
Page 11
December 2009 11 of 54
6. STB Operation
Describe how to operate the STB.
6.1 Main Menu
Main Menu for operating a lot of functions.
(1) Press <menu> button to enter Main Menu.
(2) Press <info> button to display the version information of STB.
See Figure 7, 8.
Figure 7. Main Menu
Figure 8. Version Info
Page 12
December 2009 12 of 54
6.2 SETUP
Set the system settings of STB. See Figure 9.
6.2.1 Installation
Set about receiving and playing program settings of STB. See Figure 10.
6.2.1.1 Antenna Setting
Set the antenna power on or off at Installation page.
(1) Press <Up/Down> button to select Antenna Setting option.
(2) Press <Left/Right> button to set “ON” or “OFF” for turning on or off the antenna power.
6.2.1.2 Country Setting
Set the country for Auto Scan, Manual Scan and Time Zone. Change the Country Setting will
automatically change the default Time Zone value. Country Setting also has default Frequency
and Bandwidth for Auto Scan.
(1) Press <Up/Down> button to select Country Setting option.
(2) Press <Left/Right> button to set the Country.
6.2.1.3 OSD Language
Set the On Screen Display Language, please reference section 1.1..
(1) Press <Up/Down> button to select OSD Language option.
(2) Press <Left/Right> button to set the language.
6.2.1.4 Audio Language
Set the audio language for watching program.
Figure 9. Main Menu, SETUP
Figure 10. Installation Page
Page 13
Rev 1.0 December 2009 13 of 54
(1) Press <Up/Down> button to select Audio Language option.
(2) Press <Left/Right> button to set the language.
6.2.1.5 Subtitle Language
Set the language for displaying subtitle.
(1) Press <Up/Down> button to select Subtitle Language option.
(2) Press <Left/Right> button to set the language.
6.2.1.6 Time Zone
Set the Time Zone for adjusting the system time. Some Countries are covered with more than one
Time Zone.
(1) Press <Up/Down> button to select Time Zone option.
(2) Press <Left/Right> button to set the Time Zone value.
6.2.1.7 Auto Scan
Auto Scan erases the database first, and scans default frequency and bandwidth by Country
Setting. Please check the section 1.2. and 1.2.1. for more detail.
(1) Press <RED> button to start Auto Scan.
6.2.1.8 Manual Scan
Manual Scan adds the scanning results into database, it doesn’t erase any database. But user has
to know the Frequency and Bandwidth for scanning. If user scans the same Frequency and
Bandwidth more then once, the programs will be duplicated. Please check the section 1.2. and
1.2.2. for more detail.
(1) Press <GREEN> button to start Manual Scan.
Page 14
December 2009 14 of 54
6.2.2 TV Setup
Setup the display mode for TV. See Figure 11.
6.2.2.1 TV Format
Set display format for watching program, such as 4:3LB, 4:3PS, 16:9LB, 16:9FIT.
(1) Press <Up/Down> button to select TV Format option.
(2) Press <Left/Right> button to set format.
6.2.2.2 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content. This setting
should be matched with user’s TV.
(1) Press <Up/Down> button to select TV Mode option.
(2) Press <Left/Right> button to set mode.
6.2.2.3 OSD Transparency
Set the On Screen Display transparency. 1 is the most diaphanous.
(1) Press <Up/Down> button to select OSD Transparency option.
(2) Press <Left/Right> button to set transparent value.
6.2.2.4 Banner Display Time
Set Banner displays time. Banner doesn’t disappear when setting “Always”. It displays at watching
program. See Figure 12.
(1) Press <Up/Down> button to select Banner Display Time option.
(2) Press <Left/Right> button to set the time.
Figure 11. TV Setup Page
Page 15
Rev 1.0 December 2009 15 of 54
6.2.2.5 Video Output
Set the output method to TV.
(1) Press <Up/Down> button to select Video Output option.
(2) Press <Left/Right> button to set the method.
6.2.2.6 Video Enhancement
Set the Video Enhancement
(1) Press <Up/Down> button to select Video Enhancement option.
(2) Press <Left/Right> button to set Video Enhancement.
(3) Press <Up/Down> button to select Flesh Tone or Black/White Expansion.
(4) Press <Left/Right> button to set Flesh Tone and Black/White Expansion.
Figure 13. Video Enhancement
Figure 12. Banner
Page 16
December 2009 16 of 54
6.2.3 Password
To setup password for channel lock or censorship lock. User can change password here. The default
PIN Code is 0000. See Figure 14.
6.2.3.1 Channel Lock
Lock the channel (program) which has been set lock status by password when turning on the
Channel Lock. About setting program lock status, please check the section 2.3.1.3. for more detail.
And lock many functions by password.
(1) Press <Up/Down> button to select Channel Lock option.
(2) Press <Left/Right> button to turn on or off the lock setting.
6.2.3.2 Censorship Lock
Lock the program by password and censorship threshold. The censorship info is in program content.
Under the censorship rating, user has to enter the password for watching program.
(1) Press <Up/Down> button to select Censorship Lock option.
(2) Press <Left/Right> button to set the rating.
6.2.3.3 Change Password
Change the PIN Code. If user forget the PIN Code, please contact the provider.
(1) Press <Up/Down> button to select Change Password option.
(2) Press <Left/Right> button to trigger changing password.
(3) Press <0~9> button to enter old password.
(4) Press <0~9> button to enter new password.
(5) Press <0~9> button to confirm new password.
If success, it will display PIN Code changed message. Or it will display PIN Code Error message. See
Figure 15 ~ 19.
Figure 14. Password Page
Page 17
Rev 1.0 December 2009 17 of 54
Figure 15. Enter Old Password
Figure 16. Enter New Password
Figure 17. Confirm New Password
Figure 18. PIN Code Changed
Figure 19. PIN Code Error
Page 18
December 2009 18 of 54
6.2.4 Advance Timer
User can set event(s) for watching the program(s) by date, time and frequency. When setting date
and start time is up, STB will automatically switch to program user sets. Setting here, the start time
and end time depend on current system time. Please check the section 2.3.2.1. for more detail. See
Figure 20
Figure 20. Advance Timer Page
Page 19
December 2009 19 of 54
6.2.5 Data Transfer
Transfer code (application), database or both to PC or STB. Transfer data by RS232 to PC, or from
master STB to slave STB. See Figure 21.
(1) Press <RED> button to set Target value.
(2) Press <GREEN> button to set Mode value.
(3) Press <OK> button to start transfer.
6.2.5.1 System Software Update
Update application and tsbootl by build-in card reader or USB port. See Figure 21 ~ 24.
(1) Press <BLUE> button to enter file browser.
(2) Press <Left/Right/OK> button to change folder and focus *.crd file.
(3) Press <OK> button to start update.
Figure 21. Data Transfer Page
Figure 22. System Software Update
Figure 23. Confirm to Start Update
Figure 24. Updating
Page 20
December 2009 20 of 54
6.2.6 Set Default
Reset STB to factory default. All settings by user has been operated will be reset default, and
database will be erased at same time. See Figure 25, 26.
Figure 25. Set Default
Figure 26. Saving
Page 21
December 2009 21 of 54
6.3 TV/RADIO
There are two types of program. One is TV and the other is Radio. The operation of the List and
Guide at TV and Radio are the same. Here using TV to be example. See Figure 27, 28.
6.3.1 List
User can operate some functions in List. The result of operating will be displayed. See Figure 29, 30.
(1) Press <Left/Right> button to select Tool (operation).
(2) Press <Up/Down> button to select the program.
(3) Press <RED/GREEN/YELLOW/1~8> button to operate. Buttons depend on operation.
6.3.1.1 Delete
Delete will delete the program perpetually from database . User must rescan to recover it.
(1) Press <Left/Right> button to select Delete option.
(2) Press <Up/Down> button to select the program.
(3) Press <RED/GREEN> button to set delete status.
Figure 27. Main Menu - TV
Figure 28. Main Menu - Radio
Figure 29. TV List
Figure 30. Radio List
Page 22
Rev 1.0 December 2009 22 of 54
(4) Press <YELLOW > button to confirm the operation and save the result.
Program status is changed after operating. And press <Left/Right> button will confirm and save. See
Figure 31 ~ 34.
6.3.1.2 Skip
Skip will skip the program by channel up/down when watching program.
(1) Press <Left/Right> button to select Skip option.
(2) Press <Up/Down> button to select the program.
(3) Press <RED> button to set skip status.
(4) Press <YELLOW > button to confirm the operation and save the result.
Program status is changed after operating. And press <Left/Right> button will confirm and save. See
Figure 35, 36.
Figure 31. Delete - Select
Figure 32. Delete - Select All
Figure 33. Delete - Save
Figure 34. Delete -Saving
Page 23
Rev 1.0 December 2009 23 of 54
6.3.1.3 Lock
Lock will confirm password before watching this program when Channel Lock is turned on. Please
check the section 2.2.3.1. for more detail.
(1) Press <Left/Right> button to select Lock option.
(2) Press <Up/Down> button to select the program.
(3) Press <RED> button to set lock status.
(4) Press <YELLOW > button to confirm the operation and save the result.
Program status is changed after operating. And press <Left/Right> button will confirm and save. See
Figure 37, 38.
6.3.1.4 Edit
User can use Edit to edit the program name, maximum length is 16 characters.
(1) Press <Left/Right> button to select Edit option.
(2) Press <Up/Down> button to select the program.
Figure 35. Skip
Figure 36. Skip - Select
Figure 37. Lock
Figure 38. Lock - Select
Page 24
Rev 1.0 December 2009 24 of 54
(3) Press <RED> button to display program info page.
(4) Press <OK> button to edit program name.
(5) Press <Up/Down/Left/Right/OK> button to select the character.
(6) Press <RED>/<OK> button on “Save” button to return program info page.
(7) Press <RED> button to save the editing and return to List.
If press <exit> button at step (7), it returns to List without saving. See Figure 39 ~ 44.
Figure 39. Edit
Figure 40. Edit - Select
Figure 41. Edit - Editing
Figure 42. Edit - Editing
Page 25
Rev 1.0 December 2009 25 of 54
6.3.1.5 Favorites
User can quickly channel up/down the favorite programs by favorite filter. There are 8 kinds of
favorite for user setting. They are News, Sprot, Movie, Music, Shopping, Travel, Boy, and Girl.
(1) Press <Left/Right> button to select Favorites option.
(2) Press <Up/Down> button to select the program.
(3) Press <1~8> button to set the kind of favorite.
(4) Press <YELLOW > button to confirm the operation and save the result.
Program status is changed after operating. And press <Left/Right> button will confirm and save. See
Figure 45, 46.
6.3.1.6 Search
User can search the program name by partial keyword or character(s)
(1) Press <Left/Right> button to select Search option.
(2) Press <RED> button to entry search page.
(3) Press <Up/Down/Left/Right/OK> button to input keyword or character(s).
(4) Press <RED>/<OK> button on “Search” button to return List. It will focus on the match result.
(5) Press <GREEN/YELLOW> button to next or previous match result.
Figure 43. Edit - Done
Figure 44. Edit - Save
Figure 45. Favorites
Figure 46. Favorites - Set
Page 26
Rev 1.0 December 2009 26 of 54
See Figure 47 ~ 50.
Figure 47. Search
Figure 48. Search character “U”
Figure 49. Search Result
Figure 50. Search Next
Page 27
December 2009 27 of 54
6.3.2 Guide
Guide is also naming EPG (Electronic Program Guide). Display program info and events. TV and
Radio Guide are the same. See Figure 51 ~ 53.
(1) Press <Up/Down> button to select program.
(2) Press <Left/Right> button to change date.
(3) Press <GREEN/YELLOW> button to select event.
(4) Press <BLUE> button to show event more detail.
6.3.2.1 Book
Book will remain user to watch event user sets by date and time. It is the same with Main Menu
SETUP Advance Timer, please check the section 2.2.4. for more detail. When editing in Book,
the Start Time and End Time are depended on selected event. In Advance Timer, they are
depended on current system time.
(1) Press <Up/Down> button to select program.
(2) Press <GREEN/YELLOW> button to select event of program.
(3) Press <RED> button to enter Book page.
(4) Press <Up/Down> button to select Event row user wants to set or modify.
(5) Press <RED/GREEN> button to start edit or delete one event.
Figure 51. TV Guide
Figure 52. Guide - Event
Figure 53. Guide - Event Detail
Page 28
Rev 1.0 December 2009 28 of 54
(6) Press <Up/Down> button to focus item user wants to modify.
(7) Press <Left/Right/0~9> button to change the data.
(8) Press <YELLOW> button to save. If conflict with itself or other event, it displays conflict message.
If the date and time in the event are up, STB will automatically switch to setting program in event.
Press any key except <Vol-/Vol+/mute> button, STB asks user to abort it or not at watching program.
User can delete the event while it isn’t at running. See Figure 54 ~ 59.
Figure 54. Book Page
Figure 55. Book - Editing
Figure 56. Book - Save
Figure 57. Book - Delete
Page 29
Rev 1.0 December 2009 29 of 54
Figure 58. Book - Conflict
Figure 59. Abort
Page 30
December 2009 30 of 54
6.4 MULTIMEDIA
Multimedia must be used with build-in card reader or USB port. Enter My Album, My Music, My
Move and My Record, it displays “Initializing” when just inserting device or “Device is not ready!”
without device. See Figure 60 ~ 61.
6.4.1 My Album
My Album can display JPG photo and operate it. Remove device when playing photo, it displays
“Device is not ready!” message and return to Main Menu. See Figure 62.
Figure 61. Device is not Ready!
Figure 60. Multimedia
Figure 62. Remove device when playing
Page 31
Rev 1.0 December 2009 31 of 54
6.4.1.1 Thumbnail
If there is no photo in device root folder, it will start at Thumbnail mode. Or it will start at Folder
mode. It displays JPG EXIF info (Width, Height and Date) of selected photo. See Figure 63.
Press <Up/Down/Left/Right> button to change selected photo or page.
Press <RED/OK> button to zoom selected photo.
Press <GREEN> button to rotate selected photo.
Press <YELLOW> button to do slide show at current folder.
Press <BLUE> button to browse folders and files (photos).
6.4.1.2 Folder
If there is no photo in device root folder, it will start at Folder mode. Or it will start at Thumbnail
mode. User can browser folders and files. It also displays JPG EXIF info of selected photo. See Figure
64.
Press <Up/Down/Left/Right/OK> button to browse folders or files.
Press <OK> button to view (zoom) the selected photo.
Press <exit> button to return Thumbnail mode with photos in current folder, or return Main
Figure 63. Thumbnail mode
Figure 64. Folder mode
Page 32
Rev 1.0 December 2009 32 of 54
Menu.
6.4.1.3 Zoom
View and zoom the photo at 100% from Thumbnail or Folder mode. See Figure 65, 66.
Press <GREEN> button to browse folders and files.
Press <YELLOW> button to zoom in the photo.
Press <BULE> button to zoom out the photo.
Press <Up/Down> button to display next or previous photo.
Press <exit> button to return Thumbnail mode.
User can zoom the photo with 25%, 50%, 100%, 150%, 200%. If zooming greater then 100%, press
<Up/Down/Left/Right> button can move the photo. See Figure 67 ~ 69.
Figure 65. Zoom - Decoding
Figure 66. Zoom - Display
Figure 67. Zoom - 50%
Figure 68. Zoom - 150%
Page 33
Rev 1.0 December 2009 33 of 54
6.4.1.4 Rotate
View and rotate/flip the photo from Thumbnail mode. See Figure 70, 71.
Press <RED> button, the photo will be rotated left.
Press <GREEN> button, the photo will be rotated right.
Press <YELLOW> button, the photo will be flipped horizontal.
Press <BLUE> button, the photo will be flipped vertical.
Press <exit> button to return Thumbnail mode.
After rotating or flipping the photo and return Thumbnail mode, the result will display on
Thumbnail mode. See Figure 72 ~ 76.
Figure 69. Zoom - 200%, moving Zoom
Figure 70. Edit - Decoding
Figure 71. Edit - Display
Page 34
Rev 1.0 December 2009 34 of 54
6.4.1.5 Slide Show
Slide all photos in current folder from Thumbnail mode.
Press <RED> button to play the slide show when pausing.
Press <GREEN> button to pause the slide show when playing.
Press <YELLOW> button to set repeating or once.
Figure 72. Edit - Rotate left
Figure 73. Edit - Rotate right
Figure 74. Edit - Flip horizontal
Figure 75. Edit - Flip vertical
Figure 76. Thumbnail - After editing
Page 35
Rev 1.0 December 2009 35 of 54
Press <BLUE> button to set the time interval between current and next photo.
Press <Up/Down> button to next or previous photo right away.
See Figure 77 ~ 83.
Figure 77. Slide Show - Play
Figure 78. Slide Show - Pause
Figure 79. Slide Show - Repeat once
Figure 80. Slide Show - Repeat
Figure 81. Slide Show - Fast
Figure 82. Slide Show - Medium
Page 36
Rev 1.0 December 2009 36 of 54
Figure 83. Slide Show - Slow
Page 37
December 2009 37 of 54
6.4.2 My Music
My Music can play MP3. Remove device when playing, it will display “Device is not ready!” message,
and return to Main Menu. See Figure 84.
Press <Up/Down/Left/Right/OK> button to browse folders and files (MP3).
Press <OK> button to play MP3 file.
Press <RED> button to play or stop MP3 file.
Press <GREEN> button to pause MP3 file.
Press <YELLOW> button to repeat selected MP3 file only.
Press <BLUE> button to random play MP3 file in current folder.
Press <Left/Right> button to adjust volume while playing the MP3 file.
Press <mute> button to mute.
While playing the MP3, it displays progress, current playing time, and total time. See Figure 85 ~ 92.
Figure 84. Remove device when playing
Figure 85. Browse
Figure 86. Play
Page 38
Rev 1.0 December 2009 38 of 54
Figure 88. Repeating
Figure 87. Pause
Figure 89. Random
Figure 90. Play and Volume
Figure 91. Mute with volume
Figure 92. Mute
Page 39
Rev 1.0 December 2009 39 of 54
6.4.3 My Movie
My Movie can play the movie. Remove device when playing, it will display “Device is removed !”
Message.
(1) Press <Up/Down/Left/Right/OK> button to browse folders and files .
(2) Press <OK> button to play the movie.
6.4.4 My Recorder
My record can play the recorded programs and set functions. See Figure 13 .
Remove device when playing, it will display “Device is removed !” Message.
6.4.4.1 Recording List
Recording List can display the list of recorded programs where you do preview, play or cancel here.
6.4.4.2 Recording Device
Recording device display the details of recording device .See Figure 14 .
Figure 13. My Recorder
Figure 14. Recording Device
Page 40
Rev 1.0 December 2009 40 of 54
6.4.4.3 Recording Preference
Recording Preference can set parameters of time shift and recording .See Figure 15 .
6.4.4.3.1 Time Shift Size
Show space size of time shift. Parameters are calculated based upon the remaining space of
recording device, not by man-made.setting.
6.4.4.3.2 Time Shift
There are three types of time shift：AUTO 、Pause 、OFF.Please see section 3.12 for details.
6.4.4.3.3 One Button Recording
Enter Normal Play, select ON, press to begin record; select OFF, pop-up the for setting record
time before recording.
6.4.4.3.4 Default Recording Period
System default of recording length.
6.5 GAME
There two items in Game. One is Gomoku, the other is Calendar. See Figure 93.
Figure 15 Recording Preference
Figure 93. Game
Page 41
Rev 1.0 December 2009 41 of 54
6.5.1 Gomoku
User can play with computer or someone else. See Figure 94, 95.
Press <Up/Down/Left/Right> button to set play mode and difficult.
Press <OK> button to start play Gomoku.
Press <Up/Down/Left/Right> button to select the position.
Press <OK> button to place the piece.
6.5.2 Calendar
Calendar displays the year, month, and date. See Figure 96 ~ 98.
Press <Left/Right> to change year.
Press <Up/Down> to change month.
Figure 96. Current Date
Figure 94. Gomoku
Figure 95. Playing
Page 42
Rev 1.0 December 2009 42 of 54
6.5.3 Calculator
Calculator can used for mathematical calculations.
Press <Up/Down/Left/Right> button to move the focus to the symbol you want.
Press <1~9> button to select 1~9 number.
Press <INFO> button to select.
Press <OK> button to calculate the answer.
Press <RED> button to do plus funtion.
Press <GREEN> button to do sub funtion.
Press <YELLOW> button to do multiply function.
Press <BLUE> button to do divide function
Press <EXIT> button to out calculator.
While use calculator to calculate number . See Figure 99 ~ 100.
Figure 99. Calculating number
Figure 100. The answer
Figure 97. Change year
Figure 98. Change month
Page 43
December 2009 43 of 54
6.6 Normal Play
Normal Play means STB under watching TV or playing Radio. See Figure 101, 102.
6.6.1 Information
Display program’s info or more detail info. Banner displays the program No., favorite setting, current
time, program name, current and next event, lock, scramble, subtitle and teletext info. More detail
info displays about tuner info. See Figure 103, 104.
Press <info> button to display banner to show program info.
Press <info> button when banner exist to display program more detail info.
Figure 101. Normal Play - TV
Figure 102. Normal Play - Radio
Figure 103. Banner
Figure 104. Program Info
Page 44
December 2009 44 of 54
6.6.2 Switch Program
User can channel up/down to switch program or input program number.
Press <Ch Up/Ch Down> button to next or previous program.
Press <0~9/OK> button to switch program by inputting program number.
If the input program number doesn’t exist, STB will ignore the input. See Figure 105.
6.6.3 Program List
Display Program List with No., name, and state. And user can switch program at here. See Figure
106.
Press <OK> button to display Program List.
Press <Up/Down/Left/Right/Page Up/Page Down> to preview the program.
Press <OK/exit> to switch program or return last watching program before pressing OK button.
Figure 105. Input program number
Figure 106. Program List
Page 45
December 2009 45 of 54
6.6.4 Volume
User can adjust the volume or mute. If adjust the volume with mute, mute will be canceled. See
Figure 107, 108.
Press <Vol-/Vol+> button to adjust the volume.
Press <mute> button to mute.
6.6.5 Pause
Pause video and audio. But it will be canceled by any input. See Figure 109.
Press <pause> button to pause video and audio.
Figure 107. Mute
Figure 108. Volume Bar
Figure 109. Pause
Page 46
December 2009 46 of 54
6.6.6 Audio
Switch Main or SAP sound channel. And switch output channel with LR or L or R. If setting audio
language at Main Menu Installation Audio Language, the audio channel default language
will be chosen by setting. See Figure 110.
Press <audio> button to display the audio setting page.
Press <Up/Down> button to select Channel or Sound Mode option.
Press <Left/Right> button to set the value.
Press <exit> button to exit the audio setting page.
6.6.7 Favorites
User can switch the same favorite program by favorite filter. About favorites setting, please check the
section 2.3.1.5. for more detail. See Figure 111, 112.
Press <fav Up/fav Down> button to switch the favorite filter.
Press <Ch Up/Ch Down> button to switch the same favorite program.
Figure 110. Audio Setting Page
Figure 111. Turn on favorite filter
Figure 112. Turn off favorite filter
Page 47
December 2009 47 of 54
6.6.8 Teletext
Display teletext on screen, the style of teletext may be different by content provider. See Figure 113,
114.
Press <text> button to display the teletext setting page.
Press <Up/Down> button to select the teletext language, if the program has teletext.
Press <OK/exit> button to exit the teletext setting page.
Press <0~9/Up/Down/Left/Right> button to change teletext page, if teletext exists.
Figure 113. Teletext Setting Page
Figure 114. Teletext Sample
Page 48
December 2009 48 of 54
6.6.9 Subtitle
Display the subtitle on screen, the style of subtitle may be different by content provider. See Figure
115, 116.
Press <subtitle> button to display subtitle setting page.
Press <Up/Down> button to select subtitle language, if the program has subtitle.
Press <OK/exit> button to exit subtitle setting page.
6.6.10 Teletext Subtitle
Display subtitle by teletext, the style of the teletext subtitle may be different by content provider. See
Figure 117, 118.
Press <text/subtitle> button to display teletext or subtitle setting page.
Press <Left/Right> button to select “TTX Subtitle”.
Press <Up/Down> button to select teletext subtitle language.
Press <OK/exit> button to exit the setting page.
Figure 115. Subtitle Setting Page
Figure 116. Subtitle
Figure 117. TTX Subtitle in Teletext
Figure 118. TTX Subtitle in Subtitle
Page 49
December 2009 49 of 54
6.6.11 Guide
About Guide detail, please check the section 2.3.2. for more detail.
Press <RED> button at normal play.
6.6.12 List
About List detail, please check the section 2.3.1. for more detail.
Press <GREEN> button at normal play.
6.6.13 Browse
Browse digest of programs on screen. It can display 9 programs at once. The selected program is
playing, others will display its snapshot. See Figure 119
Press <YELLOW> button to display digest.
Press <Up/Down/Left/Right> button to browse program.
Press <OK> button to switch program and watch.
Press <exit> button to return the last watching program before press yellow button.
6.6.14 Return
User can quick return the last watching program, also naming recall.
Press <BLUE> button to switch last watching program from current watching program.
6.6.15 Message
There are some messages to inform user the current condition.
6.6.15.1 No Signal
STB can’t get signal, for example, cable is disconnected. See Figure 120.
Figure 119. Digest
Page 50
Rev 1.0 December 2009 50 of 54
6.6.15.2 No Service
Program doesn’t have any content to play. See Figure 121.
6.6.15.3 Service Scrambled
Program is scrambled for payment, contact the content provider to know how to descramble it. See
Figure 122.
Figure 120. No Signal
Figure 121. No Service
Page 51
Rev 1.0 December 2009 51 of 54
6.6.15.4 Antenna Overload
The power of antenna is overload. See Figure 123.
6.6.15.5 HDTV not support
This STB doesn’t support HDTV. If the program content is HDTV, STB will display this message. See
Figure 124.
Figure 122. Service Scrambled
Figure 123. Antenna Overload
Page 52
Rev 1.0 December 2009 52 of 54
6.6.15.6 Locked
Program is locked by setting lock (please check the section 2.3.1.3.) and turning on password setting
(please check the section 2.2.3.1.). User must input correct password to watch program. See Figure
125, 126.
Figure 125. Lock by password
Figure 126. This channel is locked.
Figure 124. HDTV Not Suppert
Page 53
Rev 1.0 December 2009 53 of 54
7. Troubleshooting
If you experience problems with this receiver or its installation,in the first instance please read
carefully the relevant sections of this User Manual and this Troubleshooting section.
Problem
Possible cause
What to do
Standby light not
lit
12V DC lead unplugged
Check the lead
No signal found
Aerial is disconnected Aerial is
damaged/misaligned
Check aerial lead check aerial
Out of digital signal area
Check with dealer
No picture or
sound
The Scart interface not connect
hard
Reinsert the Scart STB to the TV
set
Tuned to digital teletex channel
Retune to another channel
Mosaic blocks in
picture or picture
freezes
Aerial may not be compatible
Check aerial
Scrambled channel
message
Channel is scrambled
Select an alternative channel
Forgotten channel
lock code
Re-install channels to cancel
channel lock
No response to
remote control
Receiver off
Plug in and turn on receiver
Handset not aimed correctly
Aim handset at front panel
Infrared Receiver Module
obstructed
Check for obstructions
Remote control batteries are
inserted incorrectly
Check batteries direction
Handset batteries exhausted
Replace remote cotrol batteries
After moving the
receiver to another
room,find can’t
receive the digital
reception
The aerial feed may come through
a distribution system which may
reduce the digital signal now
received by the receiver
Try a direct feed from the
antenna
Page 54
Rev 1.0 December 2009 54 of 54
8. Specifications
Item
Specification
Tuner
Frequency Range
VHF:174MHz to 230MHz UHF:470MHz to 862MHz
Input Impedance
75 Ohms unbalanced
Signal Input Level
-78～-25 dbm
Bandwidth
7/8 Mhz
Demodulation
Demodulator
COFDM
OFDM Modulation
2K,8K FFT,SFN and MFN
Packet Carries
2K/8K
Guard Interval
1/4,1/8,1/16,1/32
Connectors
RF IN
IEC 169-2 femate connector
TV SCART
Composite video(CVBS),RGB,audio L/R
Power
Input
100-240V～50/60Hz
Consumption
5W max
Display
Decoder Module
PAL,NTSC
Resolution
720 X 576(PAL);720 X 480(NTSC).
Aspect Ratio
4:3(Letterbox,Pan & Scan),16:9
Decoding
Video
MPEG2 Transport MP＠ML
Audio
MPEG2 Audio Layer I&II
Others
Compliance
ETSI EN 300 744 DVB-T Compliance
Sound Mode
Right,Left,Stereo
*Specifications are subject to change without further notice.
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of life separately from your household waste.There are
separate collection systems for recycling in the EU.For more information,please contact the local
authority or your retailer where you purchased the product .
Loading...