TDK ZCB-M, ZCB-11 User Manual
(1/3)
EMC Filters for AC Power Line
Conformity to RoHS Directive
For Single-phase, Small-size Box Cased ZCB-11, ZCB-M Series
FEATURES
• The ZCB-11 and ZCB-M series EMC filters exhibit outstanding
attenuation characteristics with respect to both differential mode
and common mode noise components in the MF and HF bands.
• Leakage current is maintained at less than 0.41mA for the ZCB-
M series and less than 0.75mA for the ZCB-11 series.
• Efficient manufacturing makes these filters highly cost-effective.
®
• Connection terminals employing Faston
#110 facilitate imple-
mentation and maintenance.
• It is a product conforming to RoHS directive.
APPLICATIONS
Digital applied devices (ECR, calculators, electronic scales, etc.),
control devices, measurement devices, and other electronic equip-
ment.
SHAPES AND DIMENSIONS
Screw hole H
SAFETY STANDARDS
Standard and standard No.
Par t N o.
ZCB2203-11 E62388 LR76849C P08209033/A1
ZCB2206-11 E62388 LR76849C P08209033/A1
ZCB2201-M E62388 LR76849C P08209033/A1
ZCB2203-M E62388 LR76849C P08209033/A1
U.S.A. Canada Europe
UL
UL1283 CSA C22.2 No.8 EN60939
CSA
NEMKO
1
2
B
F
G
Part No. ABCDEF GHI J
ZCB2203-11 2206-11 32 50 25 50 40 68 8 3.6 20 14
ZCB2201-M 2203-M 26 35 17.5 44 35 53 8 3.6 18 9.3
• Case: plastic, terminal: Faston
4
3
®
#110 (t=0.5mm)
Ground
I
E
A
D
C
J
terminal
Dimensions in mm
• Faston® is a registered trademark of Tyco Electronics AMP Corp. Incorporated.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
003-01 / 20080820 / e9143_zcb_11.fm
(2/3)
y
ELECTRICAL CHARACTERISTICS
Part No. ZCB2203-11 ZCB2206-11 ZCB2201-M ZCB2203-M
Rated voltage Eac(V) 250 250 250 250
Rated current(A) 3 6 1 3
Test voltage Eac(V)[Between terminal and ground terminal] 1500 1500 1500 1500
Insulation resistance(MΩ)
[DC. 500V, 1min/between terminal and ground terminal]
Leakage current(mA)
100min. 100min. 100min. 100min.
0.75max.
[250V • 60Hz]
0.75max.
[250V • 60Hz]
0.41max.
[250V • 50Hz]
0.41max.
[250V • 50Hz]
DC resistance(mΩ) 500max. 100max. 100max. 80max.
Operating temperature range(°C)[Including self-temperature rise] –25 to +85 –25 to +85 –25 to +85 –25 to +85
With derating over(°C) 55 55 55 55
Temperature rise(°C) 30max. 30max. 30max. 30max.
Attenuation frequency range
(MHz)[+5 to +35°C]
Differential mode at 30dB 2 to 10 2 to 10 2.5 to 20 2.5 to 20
Common mode at 30dB 1 to 10 1 to 10 1 to 30 1 to 30
Weight(g) 45452222
TYPICAL ELECTRICAL CHARACTERISTICS
ATTENUATION vs. FREQUENCY CHARACTERISTICS
ZCB2203-11 ZCB2206-11
100
100
80
)
dB
(
60
Common mode
40
Attenuation
20
0
0.1 0.3 1 3 10 30 100
Differential mode
Frequency(MHz
)
80
)
dB
(
60
Common mode
40
Attenuation
20
0
0.1 0.3 1 3 10 30 100
ZCB2201-M ZCB2203-M
100
80
)
dB
(
60
Common mode
40
Attenuation
20
0
0.1 0.3 1 3 10 30 100
Differential mode
Frequency(MHz
)
100
80
)
dB
(
60
Common mode
40
Attenuation
20
0
0.1 0.3 1 3 10 30 100
CIRCUIT DIAGRAM
Differential mode
Frequenc
Differential mode
Frequency(MHz
(
MHz
)
)
1
2
4
3
• All specifications are subject to change without notice.
003-01 / 20080820 / e9143_zcb_11.fm
Loading...