(1/1)
SMD Inductors(Coils)
For Power Line(Wound, Magnetic Shielded)
VLM Series VLM10555-2
FEATURES
• Low loss and large current capability design.
• High magnetic shield construction should actualize high resolution for EMC protection.
• Available for automatic mounting in tape and real package.
APPLICATIONS
Note book type and mobile computers, amusement equipment,
DVD players, VRMs, plasma displays, etc.
SHAPES AND DIMENSIONS
1R8M
10.6±0.2
RECOMMENDED PC BOARD PATTERN
8.7
3.7
Conformity to RoHS Directive
10.5max.5.4±0.2
Dimensions in mm
1.8
3.92.7
11.5
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Rated current(A)
Based on inductance change
max.(typ.)
Par t No.
Inductance
(µH)
Inductance
tolerance
(%)
Test frequency
(kHz)
DC resistance
(mΩ)
[±15%] typ. [at 25°C] [at 100°C]
VLM10555T-1R8M8R8-2 1.8 ±20 100 5.6 5.6 18(20) 14(16) 8.8
VLM10555T-2R5M8R0-2 2.5 ±20 100 6.7 6.7 15(17) 12(14) 8
VLM10555T-3R3M7R2-2 3.3 ±20 100 8.3 8.3 12(14) 10(12) 7.2
VLM10555T-4R3M7R2-2 4.3 ±20 100 8.3 8.3 9(11) 7(9) 7.2
∗
Rated current: Value obtained when current flows and the temperature has risen to 40°C or when DC current flows and the nominal value of inductance
has fallen by 30%, whichever is smaller.
∗
Based on
temperature rise
typ.
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE CHANGE vs. DC SUPERPOSITION
TEMPERATURE RISE CHARACTERISTICS
CHARACTERISTICS
4.5
4.0
3.5
)
3.0
µH
(
2.5
2.0
1.5
Inductance
1.0
0.5
0.0
0 5 10 15 20 25
DC current(A
1.8µH[at 25˚C
2.5µH[at 25˚C
3.3µH[at 25˚C
4.3µH[at 25˚C
]
]
]
]
)
1.8µH[at 100˚C
2.5µH[at 100˚C
3.3µH[at 100˚C
4.3µH[at 100˚C
]
]
]
]
60
55
)
50
˚C
(
45
40
35
30
25
20
15
Self-temperature rise
10
5
0
1.8µH
2.5µH
3.3µH/4.3µH
024681012
DC current(A
)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
001-03 / 20080822 / e531_vlm10555_2.fm