TDK VCMS-30, VCMS-Series Datasheet
P
PRODUCTS
Data Sheet
VCMS-Series Video Camera Stands
Product Overview
The TDK VCMS-Series Video Camera Monopod
Stands are designed specifically for mounting a
shielded video camera in EMC test environments.
The monopod stands are constructed of durable,
non-conductive, commercial grade fiberglass and
plastic that will not interfere with RF test measurements.
Each VCMS rests on a solid Delrin base that provides stability and balance for heavier equipment
but is lightweight enough to allow for ease of
movement within the test facility. The VCMS is
available in three models:
VCMS-150R The VCMS-150R telescoping mono-
pod stand easily adjusts from 100 cm to 150 cm
in height, and supports equipment up to 10 kg. It is
designed for use in anechoic chambers, shielded
rooms, and OATS.
VCMS-100RSB The VCMS-100RSB telescoping
monopod stand adjusts from 50 cm to 100 cm in
height, supports equipment up to 10 kg, and features a support bracket to stabilize the stand
against an object. It is designed for use on car
seats to monitor the dashboard and instrument panel during automotive testing.
VCMS-30 The VCMS-30 monopod stand is fixed
at 30 cm high and supports equipment up to 1.5
kg. It is designed for use in small test environments
such as a TEM cell.
Application
Portable mounting for video cameras
The TDK VCMS Video Camera Monopod
Stands are built for use in EMC test environments. Camera stands are available in several
models to meet your specific requirements.
Features
Three models available to fit your test require-
ments
1101 Cypress Creek Road Cedar Park, Texas 78613, USA 1-512-258-9478 FAX 1-512-258-0740
P
PRODUCTS
VCMS-Series Video Camera Stands
Mechanical Specifications
Construction: Fiberglass and plastic
Finish: Preventive water absorp-
tion seal
Dimensions–VCMS-150R
Extended Height: 1.5 m (59”)
Collapsed Height: 1 m (39.4”)
Base Diameter: 0.38 m (15”)
Weight: 7.7 kg (17 lbs.)
Dimensions–VCMS-100RSB
Extended Height: 1 m (39.4”)
Collapsed Height: 0.5 m (19.7”)
Support Bracket Length: 0.36 m (14”)
Base Diameter: 0.38 m (15”)
Weight: 7.7 kg (17 lbs.)
Ordering Information
Product: Camera Stand
Model Number: VCMS-150R, VCMS-
100RSB, VCMS-30
Warranty: 1 year
To place an order or to learn more about the
TDK products that best meet your needs, contact your TDK sales representative:
TDK RF Solutions Inc.
1101 Cypress Creek Rd.
Cedar Park, Texas 78613 USA
Phone: 1-512-258-9478
Fax: 1-512-258-0740
E-mail:
World Wide Web: www.tdkrfsolutions.com
info@tdkrf.com
Dimensions–VCMS-30
Fixed Height: 30 cm (12”)
Base Diameter: 15 cm (6”)
Weight: 3 kg (7 lbs.)
TOTALI RF EXPERTISE™
S
SYSTEMS C CHAMBERS P PRODUCTS
www.tdkrfsolutions.com
To learn more about TDK’s wide range of innovative test products, solutions and services visit www.tdkrfsolutions.com
Copyright © TDK RF Solutions Inc. All rights reserved. Specifications subject to change without notice.
SW
SOFTWARE
TS
TEST SERVICES
Rev. 2011-08-02
Loading...