TDK TREK Max Wireless User Manual

TREK Max Battery Replacement Instructions

Caution: Disconnect the AC power adapter and place the power switch in the OFF

position before beginning the replacement.

1. Remove the 7 screws on the bottom side of the unit base using a T-6 TORX

driver.

2. Using a small flat bladed screwdriver or tweezers, lift the base cover away from

the A34 body.

3. With the cover removed, lift the foam piece from its position.

4. Unplug the battery and replace with a battery pack from TDK Life on Record. A

screwdriver can be used to carefully press the connector of the new battery into

the socket.

5. Route the wires into place and replace the foam strip.

6. Place the base cover in position and reinstall the 7 screws.

This completes the battery replacement procedure.

Proper disposal of the old battery is essential from an environmental and safety point

of view. Please follow local regulations for proper disposal. Putting any battery

directly in the trash will harm the environment.

Do not incinerate.