TDK mojo 128F, mojo 256F User Manual

NOTE ON HELP MATERIALS......................................... 4

UNPACKING MOJO....................................................... 4

QUICK SETUP.............................................................. 5

USING THE TDK UNIFI

™

SOFTWARE..............................9

USING MOJO..............................................................15

FIRMWARE UPGRADE NOTE........................................38

TROUBLESHOOTING................................................... 39

PRECAUTIONS........................................................... 41

SPECIFICATIONS........................................................ 44

TECHNICAL SUPPORT................................................. 45

3

TABLE OF CONTENTS

5

Follow the instructions below to install MOJO. Here’s an overview of the installation process:

Prepare MOJO

-THEN-

• If using a Windows computer, install the UniFi software and desired bonus applications

-OR-

• If using a Mac, install the iTunes Plug-In

A_PREPARE MOJO

1.Open the battery compartment door and insert one AAA battery (included). Be sure to match the battery’s

polarity markings (+ and -) to the polarity markings on the player.

2.After inserting the battery, close the battery compartment door.

NOTE: Make sure the battery is a standard AAA alkaline.

QUICK SETUP

1

2

NOTE: Before installing the software, verify that MOJO is NOT connected to your computer.

C_INSTALL BONUS SOFTWARE IF DESIRED (Windows 98SE/ME/2000/XP only)

Your MOJO installation CD-ROM includes a few bonus applications as described below.

RealOne Player by Real Networks

RealOne Player is a popular music playback and track management application that can be used to transfer tracks
to MOJO. To enable using RealOne Player to transfer tracks to MOJO, you must install RealOne Player and then
install the plug-ins included on the installation CD-ROM.

To enable using RealOne Player to transfer tracks to MOJO:

1.Install RealOne Player from the installation CD-ROM.

2.Install the plug-ins from the installation CD-ROM.

To install RealOne Player and its song transfer plug-in:

1.Load the included installation CD-ROM into your PC.

• The installer screen should automatically appear. If the installer screen doesn’t automatically appear, double
click MY COMPUTER, double click the drive (typically "D:" or "E:") into which you loaded the installation
CD-ROM, and then in the window that opens, double click SETUP.EXE. The installer screen will appear.

2. Click the installer screen’s REALONE PLAYER button and follow the on-screen prompts to install the application.

3. Click the installer screen’s PLUG-INS button and follow any on-screen prompts to install the required song

transfer plug-in.

NOTE: Windows Media Player is not included on the MOJO installation CD-ROM, but the application can be downloaded
from www.microsoft.com, and used to transfer tracks to your MOJO. To enable this functionality, install Windows Media
Player on your PC, then install the PLUG-INS from the MOJO installation CD-ROM.

NOTE: To navigate up and down in MOJO’s track/folder lists, use the SKIP FORWARD and SKIP BACKWARD buttons.
To open a folder, highlight the folder and press SELECT. To go up a folder level, press NAV.

7

™

SOFTWARE (Windows 98SE/ME/2000/XP only)

9

(INCLUDED ONLY WITH MOJO 256F)

If your computer is running Windows, the included TDK UniFi software can be used to transfer tracks to MOJO.

To transfer tracks to MOJO with the TDK UniFi Software:

1.Power on MOJO and use the USB cable to connect MOJO to your computer.

• The USB CONNECTED message should display on the unit's LCD screen once the cable is connected.

USING THE TDK UniFi™ SOFTWARE

1

2

3

5.To create a new folder, click the NEW FOLDER button, type the desired name and press ENTER.
After you've created your desired folder(s), you're ready to transfer music to the MOJO.

NOTE: The folder labeled MOJO RECORD is reserved for voice and radio recordings and should not
be used to store music.

6.Double-click the folder to which you want to add music files.

• The folder name will be displayed in the lower right-hand corner, along with the file information and

free memory.

NOTE: A slash ("\") with no folder name means you are in the root, or main, directory of the MOJO.

NOTE: Approximately 1MB of the MOJO's memory is dedicated to system files (which are not visible on the file

manager). As a result, total free space will always be approximately 1MB less than the total system memory.

7. In the left side of the top half of the window, navigate to the folder that contains the music files or
folders you would like to transfer to MOJO.

11

3.In the left side of the top half of the window, navigate to the folder that contains the music files or
folders you would like to add to the playlist.

4.Drag files from the right side of the top half of the window to the left side of the bottom half of the window
(i.e. to the "Playlist" pane).

•You can rearrange the playback order of playlist files by clicking and dragging the files.

•To save your playlist on your computer, right click in the left side of the bottom half of the window

(i.e. to the "Playlist" pane), select SAVE PLAYLIST, select a save location and file name, and click SAVE.

5.While holding down your keyboard’s CONTROL (CTRL)key, click the files in the playlist that you wish to
transfer to MOJO.

6.Click the MOVE TO MOJO icon to begin transferring the selected tracks to MOJO.

NOTE: UniFi creates and can load .m3u type playlists.

NOTE: To load a playlist that’s saved on your hard drive into UniFi, right click in the left side of the bottom half of the

UniFi window (i.e. to the "Playlist" pane), select LOAD PLAYLIST, navigate to the location where the desired playlist is
located, click on the playlist and select OPEN.

To delete tracks from MOJO with the UniFi Software:

1.Power on MOJO and use the USB cable to connect MOJO to your computer.

• The USB CONNECTED message should display on the unit's LCD screen after the cable is connected.

2.Start the UniFi Software.

13

15

To enable hearing MOJO:

• Fully connect stereo headphones to MOJO’s headphone port.

To insert an SD/MMC memory expansion card (not included) into MOJO:

• Insert an SD or MMC card with its contacts facing the top of the unit as shown in the illustration.

To remove the card, steadily press in until it releases from the slot.

USING MOJO

SDMMC