TDK JBW24-0R5, JBW05-2R0, JBW12-0R9, JBW15-0R7, JBW05-3R0 Specification Sheet

(1/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

AC Input
Single Output, General-Purpose, UL/C-UL/TÜV Approved

J Series JBW(10 to 150W)

FEATURES

• Compact and low price.

• Wide input voltage range.

• Safety standards approved.

• Corresponds to products with CE marking.

• Full lineup of output power 10 to 150W

• Open frame

• Meets conducted noise standard FCC Class B.

• Warranty period: 3 years

• Specific bromine inflammable materials (PBDPEs, PBBs) are
not included in use.

• It is a product conforming to RoHS directive.

APPLICATIONS

Measuring equipment, robotics, automation equipment, informa­tion processing equipment, security systems, amusement equip­ment, etc.

SAFETY STANDARDS

UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV),
approved.

EMC REGULATIONS

• FCC Class-B, VCCI Class-B, EN-55011-B and EN55022-B
meet.

• Harmonic current requirement EN61000-3-2 meet(50 to 150W).

PRODUCT IDENTIFICATION

(1)Series name
(2)Rated output voltage
(3)Rated output current(R: Decimal point)

PART NUMBERS AND RATINGS

• 3.3 and 48V models(75 to 150W type) are made to order.

Conformity to RoHS Directive

JBW 05 – 2R0

(1) (2) (3)

Output voltage
(V)

10W Type 15W Type 30W Type 50W Type

Current(A) Part No. Current(A) Part No. Current(A) Part No. Current(A) Part No.
5 2 JBW05-2R0 3 JBW05-3R0 6 JBW05-6R0 10 JBW05-10R
12 0.9 JBW12-0R9 1.3 JBW12-1R3 2.5 JBW12-2R5 4.3 JBW12-4R3
15 0.7 JBW15-0R7 1 JBW15-1R0 2 JBW15-2R0 3.5 JBW15-3R5
24 0.5 JBW24-0R5 0.7 JBW24-0R7 1.3 JBW24-1R3 2.1 JBW24-2R1

Output voltage
(V)

75W Type 100W Type 150W Type

Current(A) Part No. Current(A) Part No. Current(A) Part No.
5 15 JBW05-15R 20 JBW05-20R 30 JBW05-30R
12 6.3 JBW12-6R3 8.5 JBW12-8R5 12.5 JBW12-12R
15 5.0 JBW15-5R0 6.7 JBW15-6R7 10 JBW15-10R
24 3.2 JBW24-3R2 4.3 JBW24-4R3 6.3 JBW24-6R3
48 —— —— 3.2JBW48-3R2

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

(2/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW10W Type

SPECIFICATIONS AND STANDARDS

∗

Current rating(maximum output current) is determined for –10 to +50°C. Derating is required when used outside this temperature range.

• Optional input, output cable kits are available at a separate price.

Part No. JBW05-2R0 JBW12-0R9 JBW15-0R7 JBW24-0R5
Rated output voltage and current

∗

5V • 2A 12V • 0.9A 15V • 0.7A 24V • 0.5A
Maximum output power W 10 10.8 10.5 12
Input conditions
Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370
Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase)
Input current A 0.25typ./0.35max. [AC.100V]0.15typ./0.25max.[AC.240V]
Fuse rating A 2[AC.250V, built-in]
Surge current A 15typ.(20max.)[AC.100V]30typ.(40max.)[AC.240V] 1st surge current, cold start, reset after 1s minimum.
Leakage current mA 0.1typ./0.75max.[AC.100V, 60Hz]0.15typ./0.75max.[AC.240V, 60Hz]
Power factor 0.6typ./0.45typ.[AC.100/240V]

Efficiency

% 71typ.[AC.100V] 78typ.[AC.100V] 79typ.[AC.100V] 82typ.[AC.100V]

% 71typ.[AC.240V] 79typ.[AC.240V] 80typ.[AC.240V] 83typ.[AC.240V]
Output characteristics
Output voltage Edc V 5 12 15 24
Voltage variable range Edc V Fixed Fixed Fixed Fixed
Maximum output current A 2 0.9 0.7 0.5
Minimum output currentA0000
Overvoltage threshold Edc V 5.75min. 13.8min. 17.25min. 27.6min.
Overcurrent threshold A 2.5min. 1.12min. 0.87min. 0.62min.

Voltage
stability

Source effect % 0.4max.[Within the input voltage range]
Load effect % 0.8max.[0 to 100% load]
Temperature effect % 1max.[Ambient temperature: –10 to +50°C]
Drift(Time effect) % 0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]

Recovery % ±4max.[50 to 100% sudden load change]
Ripple Ep-p mV 80max. 120max. 120max. 120max.
Ripple noise Ep-p mV 120max. 150max. 150max. 150max.
Start up time ms 700max.(200typ.)/700max.(200typ.) [AC.100/240V]
Hold up time ms 15typ/140typ [AC.100/240V]
Auxiliary functions
Indicator display No
Overvoltage protection Zenor diode clamp method, output may latch up depending on the condition.
Overcurrent protection Fold back type, automatic recovery.
Remote ON-OFF No
Remote sensing No
Parallel operation Impossible
Series operation Inpossible
Output voltage external variable function No
Standards
Safety standards UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement No
Constructions
External dimensions mm 21× 36×95[H× W×L]
Weight g 50max.
Mounting method Can be attached to 1 side.
Case material No(PWB Material: CEM3)

(3/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW10W Type

SHAPES AND DIMENSIONS

TERMINAL DESIGNATION

Connector made by

Power supply side
connector

Cable Side Option Part No.

Housing Terminal Set 4EU20G054
Japan Solderless Terminal Co., Ltd.
Input Connector(TB1) VH Series B3P5-VH-B VHR-5N SVH-21T-P1.1
Output Connector(TB2) XH Series B4B-XH-2 XHP-4 SXH-001T-P0.6
LCE
Input Connector(TB1) P101 Series P101-05-2/4 H101-05 T101
Output Connector(TB2) P221 Series P221-04 H221-04 T221-01

+

_

_

+

L

N

95

7

3.5

3.5

7

29±0.5

17.3

3.8

16.4 1.6

3max.

21

88±0.5

7

3.5

36

7

10

5.2

GND Pad
Solder Side

Solder Side

2-

ø3.4Mounting holes

TB1

TB2

JBW05-2R0

TDK

Ser. No. LABEL

Area For Spacer(

ø6.0max.)

Dimensions in mm

±1mm : without specified dimensions

Terminal No. Designations
1 Input terminal(L)
2 Input terminal(N)
3 Frame ground terminal(G)
4 Ground pad
5 Output terminal(–)
6 Output terminal(+)

+

_

_

+

L

N

4

6
5

TB2

P4

P3

P2

P1

+

–

P3

TB1

P2LN

P1

1

2

3

(4/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW15W Type

SPECIFICATIONS AND STANDARDS

∗

Current rating(maximum output current) is determined for –10 to +50°C. Derating is required when used outside this temperature range.

• Optional input, output cable kits are available at a separate price.

Part No. JBW05-3R0 JBW12-1R3 JBW15-1R0 JAW24-0R7
Rated output voltage and current

∗

5V • 3A 12V • 1.3A 15V • 1.0A 24V • 0.7A
Maximum output power W 15 15.6 15 16.8
Input conditions
Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370
Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase)
Input current A 0.36typ./0.43max.[AC.100V]0.2typ./0.24max.[AC.240V]
Fuse rating A 2[AC.250V, built-in]
Surge current A 15typ./19.5max.[AC.100V]30typ./41max.[AC.240V] 1st surge current, cold start, reset after 1s minimum.
Leakage current mA 0.2typ./0.75max.[AC.100V, 60Hz]0.3typ./0.75max.[AC.240V, 60Hz]
Power factor 0.6typ./0.45typ.[AC.100/240V]

Efficiency

% 72typ.[AC.100V] 76typ.[AC.100V] 76typ.[AC.100V] 78typ.[AC.100V]

% 72typ.[AC.240V] 74typ.[AC.240V] 74typ.[AC.240V] 76typ.[AC.240V]
Output characteristics
Output voltage Edc V 5 12 15 24
Voltage variable range Edc V Fixed Fixed Fixed Fixed
Maximum output current A 3 1.3 1 0.7
Minimum output currentA0000
Overvoltage threshold Edc V 5.75min. 13.8min. 17.25min. 27.6min.
Overcurrent threshold A 3.15min. 1.37min. 1.05min. 0.74min.

Voltage
stability

Source effect % 0.4max.[Within the input voltage range]
Load effect % 0.8max.[0 to 100% load]
Temperature effect % 1max.[Ambient temperature: –10 to +50°C]
Drift(Time effect) % 0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]

Recovery % ±4max.[50 to 100% sudden load change]
Ripple Ep-p mV 80max. 120max. 120max. 120max.
Ripple noise Ep-p mV 120max. 150max. 150max. 150max.
Start up time ms 200max.(25typ.)/100max.(25typ.)[AC.100/240V] 200max.(40typ.)/100max.(40typ.)[AC.100/240V]
Hold up time ms 13typ./150typ. [AC.100/240V]
Auxiliary functions
Indicator display No
Overvoltage protection Zenor diode clamp method, output may latch up depending on the condition.
Overcurrent protection Rectangular type, automatic recovery.
Remote ON-OFF No
Remote sensing No
Parallel operation Impossible
Series operation Impossible
Output voltage external variable function No
Standards
Safety standards UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement No
Constructions
External dimensions mm 22.6× 50× 95[H× W× L]
Weight g 80max.
Mounting method Can be attached to 1 side.
Case material No(PWB Material: CEM3)

(5/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW15W Type

SHAPES AND DIMENSIONS

TERMINAL DESIGNATION

Connector made by

Power supply side
connector

Cable Side Option Part No.

Housing Terminal Set 4EU20G054
Japan Solderless Terminal Co., Ltd.
Input Connector(TB1) VH Series B3P5-VH-B VHR-5N SVH-21T-P1.1
Output Connector(TB3) XH Series B4B-XH-2 XHP-4 SXH-001T-P0.6
LCE
Input Connector(TB1) P101 Series P101-05-2/4 H101-05 T101
Output Connector(TB3) P221 Series P221-04 H221-04 T221-01

+

_

_

+

L

N

TB3

TB1

1.6

18.5

3max.

22.6

Solder Side

4-

ø

3.4Mounting holes

43±0.5

28

3.5

3.5

3.8

88±0.5

7

7

95

23.7

5.2

50

7

7

GND Pad

Solder Side 3 Places

Ser. No. LABEL

JBW05-3R0

TDK

Area For Spacer (ø6.0max.)

Dimensions in mm

±1mm : without specified dimensions

+

_

_

+

L

N

4

6
5

TB3

P4

P3

P2

P1

+

–

P3

TB1

P2LN

P1

1

2

3

Terminal No. Designations
1 Input terminal(L)
2 Input terminal(N)
3 Frame ground terminal(G)
4 Ground pad
5 Output terminal(–)
6 Output terminal(+)

(6/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW30W Type

SPECIFICATIONS AND STANDARDS

∗

Current rating(maximum output current) is determined for –10 to +50°C. Derating is required when used outside this temperature range.

• Optional input, output cable kits are available at a separate price.

Part No. JBW05-6R0 JBW12-2R5 JBW15-2R0 JAW24-1R3
Rated output voltage and current

∗

5V • 6A 12V • 2.5A 15V • 2A 24V • 1.3A
Maximum output power W 30 30 30 31.2
Input conditions
Input voltage Eac/Edc V 85 to 265[Rating: 100 to 240]/110 to 370
Input frequency Hz 47 to 440[Rating: 50 to 60](Single phase)
Input current A 0.65typ./0.86max.[AC.100V]0.35typ./0.48max.[AC.240V]
Fuse rating A 2[AC.250V, built-in]
Surge current A 15typ./30max.[AC.100V]30typ./60max.[AC.240V] 1st surge current, cold start, reset after 1s minimum.
Leakage current mA 0.35typ./0.75max.[AC.100V, 60Hz]0.5typ./0.75max.[AC.240V, 60Hz]
Power factor 0.6typ./0.45typ.[AC.100/240V]

Efficiency

% 75typ.[AC.100V] 78typ.[AC.100V] 79typ.[AC.100V] 80typ.[AC.100V]

% 77typ.[AC.240V] 79typ.[AC.240V] 80typ.[AC.240V] 81typ.[AC.240V]
Output characteristics
Output voltage Edc V 5 12 15 24
Voltage variable range Edc V Fixed Fixed Fixed Fixed
Maximum output current A 6 2.5 2 1.3
Minimum output currentA0000
Overvoltage threshold Edc V 5.6min. 13.3min. 16.6min. 26.5min.
Overcurrent threshold A 6.3min. 2.7min. 2.1min. 1.4min.

Voltage
stability

Source effect % 0.4max.[Within the input voltage range]
Load effect % 0.8max.[0 to 100% load]
Temperature effect % 2max.[Ambient temperature: –10 to +50°C]
Drift(Time effect) % 0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]

Recovery % ±4max.[50 to 100% sudden load change]
Ripple Ep-p mV 80max. 120max. 120max. 120max.
Ripple noise Ep-p mV 120max. 150max. 150max. 150max.
Start up time ms 650max.(350typ.)/320max.(130typ.)[AC.100/240V]
Hold up time ms 20typ./160typ.[AC.100/240V]
Auxiliary functions
Indicator display No
Overvoltage protection Voltage shut-down type.
Overcurrent protection Rectangular type(Winker operation), automatic recovery.
Remote ON-OFF No
Remote sensing No
Parallel operation Impossible
Series operation Impossible
Output voltage external variable function No
Standards
Safety standards UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement No
Constructions
External dimensions mm 26× 55×122[H× W×L]
Weight g 150max.
Mounting method Can be attached to 1 side.
Case material No(PWB Material: CEM3)

(7/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW30W Type

SHAPES AND DIMENSIONS

TERMINAL DESIGNATION

Connector made by

Power supply side
connector

Cable Side Option Part No.

Housing Terminal Set 4EU20G057
Japan Solderless Terminal Co., Ltd.
Input Connector(TB1) VH Series B3P5-VH-B VHR-5N SVH-21T-P1.1
Output Connector(TB2) VH Series B4P-VH-B VHR-4N SVH-21T-P1.1
LCE
Input Connector(TB1) P101 Series P101-05-2/4 H101-05 T101
Output Connector(TB2) P101 Series P101-04 H101-04 T101

3max.

26

+

_

_

+

L

N

21.4 1.6

30

6.6

6.5

5

8

8

8

8

55

16

122

112±0.5

45±0.5

5

4-ø3.4Mounting holes

GND Pad 2 Places
Solder Side

Solder Side 2 Places

Ser. No. LABEL

JBW05-6R0

TDK

TB1

TB2

Area For Spacer (

ø

6.0max.)

Dimensions in mm

±1mm : without specified dimensions

+

_

_

+

L

N

4

4

5
6

TB2

P1

P2

P3

P4

–

+

TB1

P1P2L

N

P3

3

2

1

Terminal No. Designations
1 Input terminal(L)
2 Input terminal(N)
3 Frame ground terminal(G)
4 Ground pad
5 Output terminal(–)
6 Output terminal(+)

(8/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW50W Type

SPECIFICATIONS AND STANDARDS

∗1

Current rating(maximum output current) is determined for –10 to +50°C. Derating is required when used outside this temperature range.

∗2

Please note that the deterioration of parts is occasionally caused when operating for a long time(over 10 minutes) with the voltage below the range of the
input voltage.

• Optional input, output cable kits are available at a separate price.

Part No. JBW05-10R JBW12-4R3 JBW15-3R5 JBW24-2R1
Rated output voltage and current

∗1

5V • 10A 12V • 4.3A 15V • 3.5A 24V • 2.1A
Maximum output power W 50 51.6 52.5 50.4
Input conditions
Input voltage Eac/Edc

∗2

V 85 to 265[Rating: 100 to 240]/120 to 375
Input frequency Hz 47 to 66[Rating: 50 to 60](Single phase)
Input current A 0.7typ./0.88max. [AC.100V]0.35typ./0.5max.[AC.240V]
Fuse rating A 3.15[AC.250V, built-in]
Surge current A 15typ.(30max.)[AC.100V]40typ.(60max.)[AC.240V] cold start
Leakage current mA 0.35typ./0.75max.[AC.100V, 60Hz]0.5typ./0.75max.[AC.240V, 60Hz]
Power factor 0.99typ./0.93typ.[AC.100/240V]

Efficiency

% 77typ.[AC.100V] 80typ.[AC.100V] 80typ.[AC.100V] 81typ.[AC.100V]

% 79typ.[AC.240V] 81typ.[AC.240V] 81typ.[AC.240V] 83typ.[AC.240V]
Output characteristics
Output voltage Edc V 5 12 15 24
Voltage variable range Edc V 4.5 to 5.5 10.8 to 13.2 13.5 to 16.5 21.6 to 26.4
Maximum output current A 10 4.3 3.5 2.1
Minimum output currentA0000
Overvoltage threshold Edc V 5.75 to 6.9 13.8 to 16.8 17.2 to 21 27.6 to 33.6
Overcurrent threshold A 10.5min. 5.4min. 4.4min. 2.7min.

Voltage
stability

Source effect % 0.4max.[Within the input voltage range]
Load effect % 0.8max.[0 to 100% load]
Temperature effect % 1max.[Ambient temperature: –10 to +50°C]
Drift(Time effect) % 0.4max.[25°C, input and output ratings, after input voltage ON for 30min to 8h]

Recovery % ±4max.[50 to 100% sudden load change]
Ripple Ep-p mV 80max. 120max. 120max. 120max.
Ripple noise Ep-p mV 120max. 150max. 150max. 150max.
Start up time ms 500max.(400typ.)/500max.(400typ.) [AC.100/240V]
Hold up time ms 20typ./20typ. [AC.100/240V]
Auxiliary functions
Indicator display No
Overvoltage protection Voltage shut-down type.
Overcurrent protection Rectangular type, automatic recovery.
Remote ON-OFF No
Remote sensing No
Parallel operation Impossible
Series operation Possible
Output voltage external variable function No
Standards
Safety standards UL60950-1, CSA C22.2 No.60950-1(C-UL), EN60950-1(TÜV) approved.
Noise terminal voltage FCC-B, VCCI-B, EN55011-B, EN55022-B meet.
Input harmonics current requirement EN61000-3-2 meet.
Constructions
External dimensions mm 26× 55×190[H× W×L]
Weight g 220max.
Mounting method Can be attached to 1 side.
Case material No(PWB Material: CEM3)

(9/30)

004-02 / 20070523 / ea122_jbw.fm

• All specifications are subject to change without notice.

JBW50W Type

SHAPES AND DIMENSIONS

TERMINAL DESIGNATION

Connector made by

Power supply side
connector

Cable Side Option Part No.

Housing Terminal Set 4EU20G057
Japan Solderless Terminal Co., Ltd.
Input Connector(TB1) VH Series B3P5-VH-B VHR-5N SVH-21T-P1.1
Output Connector(TB2) VH Series B4P-VH-B VHR-4N SVH-21T-P1.1
LCE
Input Connector(TB1) P101 Series P101-05-2/4 H101-05 T101
Output Connector(TB2) P101 Series P101-04 H101-04 T101

Solder Side 2 Places

Ser. No. LABEL

Area For Spacer (

ø6max.)

+

_

_

+

L

N

TB2

TB1

12.18

8

5.5

180±0.5

190

5

5

8

7.1

8

5

17.2

47.7

45±0.5

55

3max.

26

35.7

1.621.4

5

GND Pad 2 Places

Solder Side

4-ø4 Mounting holes

JBW05-10R

TDK

RATING LABEL

Dimensions in mm

±1mm : without specified dimensions

+

_

+

L

N

_

5

6

4

4

7

TB2

P4

P3

P2

P1

–

+

TB1

3

2

1

P3

P2 N

P1

L

Terminal No. Designations
1 Input terminal(L)
2 Input terminal(N)
3 Frame ground terminal(G)
4 Ground pad
5 Output terminal(–)
6 Output terminal(+)

7

Output voltage variable
volume