TDK DAPS-01 User Manual
P
PRODUCTS
Data Sheet
DAPS-01 Dual Antenna Positioning System
Product Overview
The TDK DAPS-01 Dual Antenna Positioning System consists of a dual antenna mast with integrated
turntable and SI-300 system interface. The DAPS01 is specifically designed for remote positioning
of two antennas, both in the horizontal and vertical
planes, during EMC testing. The DAPS-01 simplifies testing by allowing the user to test continuously
across two antenna bandwidths without interruption.
Remote Control The DAPS-01 is remotely con-
trolled by the TDK SI-300 system interface unit. A
single independent control unit is used to handle
the turn axis and the polarization sense.
Fiber Optic Link Remote control of the position-
ing system is achieved by use of fiber optic links,
eliminating a potential interference source and
distance limitations.
Custom Dimensions The dimensions of the posi-
tioning system mast and turntable are dependent
on the customer’s required illumination area. Dimensions are limited only by the maximum length
of cable that is used.
Applications
Compatible with the TDK SI-300 system inter-
face
Fiber optic interface
Custom dimensions to meet customer require-
ments
Shielded remote modules for use in high field
environments
The TDK DAPS-01 Dual Antenna Positioning
System is designed to simply testing by enabling remote positioning of two antennas in
EMC test environments.
Features
Remote independent vertical and horizontal
polarization
Universal linear power supply
1101 Cypress Creek Road Cedar Park, Texas 78613, USA 1-512-258-9478 FAX 1-512-258-0740
P
PRODUCTS
DAPS-01 Dual Antenna Positioning System
System Components
Dual Antenna Mast with Integrated Turntable
SI-300 System Interface
One set of fiber optic cables
Mechanical Specifications
Ordering Information
Product: Dual Antenna Position-
Model Number: DAPS-01
Warranty: 1 year limited
To place an order or to learn more about the
TDK products that best meet your needs, con-
Dimensions: 2.16 m H x 1.65 m D
(85” x 65”)
Adjustable Height: 1 - 2 m (39” - 79”)
Polarization: Automatic horizontal
and vertical polarization
Cross-Boom Loading: 20 kg (44 lbs.)
Mast Weight: 30 kg (67 lbs.)
tact your TDK sales representative:
TDK RF Solutions Inc.
1101 Cypress Creek Rd.
Cedar Park, Texas 78613 USA
Phone: 1-512-258-9478
Fax: 1-512-258-0740
E-mail: info@tdkrf.com
World Wide Web: www.tdkrfsolutions.com
Turntable Weight: 35 kg (77 lbs.)
Construction: Non-conductive fiber-
glass and ABS plastic
ing System
Electrical Specifications
Voltage: 115/230
Amp: 4/3A
Hertz: 50/60 Hz
Phase: 1φ
Source Air: Regulated to 20 psi
TOTALI RF EXPERTISE™
S
SYSTEMS C CHAMBERS P PRODUCTS S SOFTWARE
www.tdkrfsolutions.com
To learn more about TDK RF Solutions’ wide range of innovative products and services visit www.tdkrfsolutions.com
© Copyright 2010 TDK RF Solutions Inc. All rights reserved. Specifications subject to change without notice.
TS
TEST SERVICES
Rev. 2010-03-02
Loading...