TD Prime 4, Prime 2 Instructional Manual

Page 1
0
2nd Generation Prime
Cam DVR Dash Cam
Instructional Manual
2/4
Page 2
1
Index
1. Index......................................................................................
2.1Features........................................................................
.
3.. Operation instruction...............................................................
Part description...................................................................
Button description................................................................
Indicating Light Description......................................................
4.
Operating Instructions.............................................................
5.
Operating Instructions Continued............................................
System Setup.........................................................................
6.
Video setup.....................................................................
Parking monitor...............................................................
Rear camera setting.........................................................
7.
8.
9.
Recording Mode............................................................
Camera Mode................................................................
Playback Mode................................................................
Specification...................................................................
Specification....................................................................
Specification continued...................................................
Trouble-shooting.............................................................
Package Includes............................................................
Page 3
2
Features
This 2019 model records video and takes photos during driving. It adopts dual Sony323 1080P HD sensor for top of the line night vision performance.
Structure diagram
Page 4
3
Part description
Button
Description
POWER ON/OFF
1. Short press to power on, long press to power off
2.While powered on status, short press to turn on LED light
OK
Stop Recording / Start Recording
MENU
RESET
RESET
1. USB Power Source
2. 2. 2nd Outside Camera
3. Reset Button
4. Microphone
5. 3.0 inch HD Screen
6. LED Recording Indicator
7. LED Charging Indicator
Button description
8. HD Lens
9. Speaker
10.OK Button
11. Mode Button
12. Lock Button
13.Power Button
14. SD Card Slot
Menu (M) button while not recording Menu (M) button - short press While not recording
Gets to dash camera menu settings
15. Up Button Selection Arrow
16. Menu Button
17. Down Button Selection Arrow
Up Button Selection Arrow
Down Button Selection Arrow
Navigate Arrow
Navigate / toggle between cameras mode
Page 5
4
Indicating light description
Name
Description
When blue light flashes camera is recording video; When blue light stops flashing the recording stops. When Red light is solid camera is charging; when red light turns off the battery is fully charged.
2 Indicating lights
Operating Instruction
POWER ON/OFF
1. Short press POWER Button to turn on and long press to turn off.
2. When the car charger is plugged in, the dash cam turns on and starts
recording; when car charger is unplugged and dash cam battery fully charged, video files saved and dash cam powered off. Dash camera is not meant to stay on without a power source.
Battery charging: Ways of battery charging
1. Charging via PC USB cable. Will not be able to record
2. Charging via car charger. Charging battery icon on screen flashes while charging, with blue light flashing.
Page 6
5
Operating Instruction Continued
Installing memory card
Push memory card into card slot per with metal on sd card facing forward. Remove memory card: Gently push the sd card inward a bit, and then it releases, remove it from card slot.
Basic operations
Mode: Must stop recording to get into menu screen Video mode: Is for recording videos Photo mode: Is for taking photos Playback mode: It for Reviewing videos and photos
Video setup -Must stop recording to get into menu screen
Resolution options: These settings ONLY WORK WHEN ONE CAMERA is being used to record: WVGA P30 (Low), FHD P30 (Medium), HD P60 (High) ONLY Resolution option when recording and using BOTH inside and Outside cameras: FHD P30+FHD P30
Loop recording (Used to measure increments in which camera records): 3 Minutes, 5 Minutes, 10 Minutes, Off
Exposure (Used to filter backgrounds): 0.0, -1/3, -2/3, -1.0, -4/3, -5/3,
-2.0, 2.0, 5/3, 4/3, 1.0, 2/3, 1/3 Motion Detection (Used to monitor vehicle when unattended): On, Off Never
have ON while driving. ON- Will continue to record as normal, but if Motion is detected, recording will be locked and saved.
Record Audio (Used to record voice and sound in main camera area): On, Off Date stamp (Used to show recording time & date information): On, Off G-sensor Used to lock and store recordings when a sudden impact is detected
(accident) or when hard braking is applied): Low, Medium, High, Off Recommended setting is LOW
Page 7
6
Must stop recording to get into menu screen
Delay Time lapse when recording:
1 Second, 5 Dual Cam Display (Used to determine which camera is to be viewed): Front, Behind, Both
Setup
Date/Time, Plate number, Auto power off, Beep sound, Language, Frequency, TV mode, Format, Default setting ,Version, Screen saver, Version Delete all, Lock all, Unlock all
Video Mode Options
Video recording: Switch to video mode, press OK button to start/stop recording video.
Photo Taking: Switch to camera mode, press OK to take photo Playback: Switch to playback mode, press LEFT/RIGHT button to select video
files, press OK button to play/pause. Parking monitor ON/OFF Never have ON while driving. ON- Power off dash camera and when vibration or motion is detected it will turn on dash cam and start recording. Video is saved and locked. Dash cam will automatically go back into parking monitor mode based on the time amount that is set in loop recording
Outside Second Camera Setting
Plug second camera to HD port on dash cam, follow the sequence of: Left down arrow to toggle between camera's.
Video setup - Resolution setup
To start dual camera recording, only resolution option is: “FHDP30+FHDP30”.
Seconds, 10 Seconds, Off
Must stop recording to get into menu screen
System setup
Press Middle left MENU button to enter main menu, go to SETUP menu and select desired options via OK button. Return to main menu via middle left MENU button
System setup options
Date/Time: Used to set Date and Time. Use Right, Left, and OK buttons to change values and press Menu button to save. Auto power off: Used to turn camera off after unit is first powered on. Off/1 minute/3 minutes/5 minutes Language: Used to select language: Chinese simplified/Chinese traditional/ English/French/Japanese/Russian/German/Italian/Portuguese/ Spanish etc.
Frequency: Used to clear frequency barriers that arrive. 50Hz/60Hz Format SD Card: Cancel/OK
This will erase every recording or photo taken even ones that are saved on the card Default setting: Restore default setting, Cancel/OK
Page 8
Recording Mode
As shown in picture;
Press the "OK" button to start recording, the video red, top left icon will start to flash, and the blue indicator will start flashing. You are now in record mode.
Camera Mode
1. Mass
Storing video files and photos.
For PC cam mode.
Select to go to dash cam interface.
Storage
2. Camera
3. Video
Playback Mode
Delete all: Used to delete videos and photos: Delete all video, Cancel/ OK
Lock all: Used to lock videos and photos Lock all video, Cancel/OK Unlock all: Used to unlock videos and photos: Unlock all video, Cancel/
OK
USB
Connect USB with PC, power on and USB menu pops up
7
Page 9
Specification
Sensor
Lens:
Resolution:
Camera mode
Video format: H.265 Photo format: JPEG
Frame rate:
G-sensor:
Record mode:
Parking monitoring
Memory card:
LCD: 3.0 inch
Video output: HDMI,AV OUT
Boot time: 2S
Working voltage: DC 5V 1.5A
Motion detection Supports
USB: USB 2.0 disk
Video specification:
Dual Sony IMX323
6 glass 1.8 wide angle lens
FHD1080P@30FPS+FHD1080P@30FPS
Built-in lens 300W pixels
12 million
H.264@1080P 30fp/s
H.264@720P 60fp/s H.264@720P 30fp/s
Built in 3-axis solid collision detection
Loop recording, time lapse recording
Supports
Support TF memory card 8GB128GB
FHD1080P=1920*1080 /
1080P=1440*1080/
8
Page 10
Light source
Image resolution:
12M 4032*3024 10M 3648*2736
8M 3264*2448
frequency 50HZ/60HZ
5M 2592*1944
3M 2048*1536
Working current:
450mA (typical value) (DC 5V)
Quiescent current: 20uA
Storage temperature: -20-70℃)
Operating temperature: 0-60℃) Operation humidity (RH) 15%-60% RH
Battery:
Built-in polymer battery 240mAh
Troubleshooting:
If recording stops:
Due to the huge HD video data, please use the high-speed TF SD card. Recordings may stop if SD card
is full with locked video
“File Error” prompt appears when viewing pictures, in playback video or recording mode
When the TF card stores data, an error occurs, and the file is incomplete. Please use the “Format”
function of Dash cam to reformat the TF card.
The image taken is foggy
Check the lens for dirt and fingerprints; use lens cloth to wipe the lens before taking a picture.
When shooting scenes such as the sky and the water, the image is very dark.
The camera's auto exposure function is affected in large contrast scenes and can be corrected by adjusting the “EV” value in the machine setup menu.
Under cloudy and indoor light, the color performance is not perfect
Please check the machine "White Balance" function ,if it was be set to automatic.
There are horizontal stripes in the image
This is caused by setting the wrong "light source frequency". Please set it to "50Hz" or "60Hz" according
to the local power supply frequency.
When the machine freeze
ress the reset button to resume recovery.
P
Packaging accessories:
1. 2nd Gen Prime Front Facing Dash Camera
2. Outside Weather-proof Camera
3. Windshield Suction Mount
4. CLA Power Cord
5. USB Data transfer cable
6. Instructional Manual
9
Loading...