TCT Mobile 261 User Manual

1 Your Phone .................. ........................

S003KV0500040

（

（CDA3122002C2）

Standard charger

CBA3120AA0C2）

Battery

（CAB31L0002C1）

USB cable

Headset

（CCB3160A10C0）

Navigation Key Confirm an option (Press the middle of the key) Select the shortcut functions list on the screen (Press the left or right key) Adjust volume during a call (Press Navigation Key)

Make a call from the SIM1, SIM2, or SIM3 card in standby mode Answer a call View dialed calls of SIM1, SIM2, and SIM3 cards in standby mode

The figure above shows the appearance of your phone and is provided only for your reference.

1.1

End or reject a call Return to the standby mode

Keys

Power on or power off the phone (Long keypress)

Left softkey

Right softkey

Access Tools function in standby mode

Access Write message in standby mode

Access your voice mail(Long keypress)

In Idle Screen:

Long/short keypress: Lock/Unlock the keypad

In edit mode: Short keypress: input space Long keypress: s witch language Fn key + Space: switch input mode

1.2

Main Screen Icons

Level of network reception

Battery charge level

Bluetooth status

Headset connected to the phone Keypad locked Call forwarding activated New text messages

New MMS

Missed calls

Reject calls Alarm clock

Silent profile activated Indoor profile activated

Meeting profile activated

Outdoor profile activated MicroSD card inserted.

2 Getting Started....................................

2.1

Installing SIM Cards and the Battery

You can install three Subscriber Identification Module (SIM) cards in the phone at the same time. When inserting a SIM card, ensure that the golden contact area on the SIM card is facing downward and that the beveled edge of the SIM card is properly aligned with that of the SIM card slot.

2.2

Removing the Battery and the SIM Card

Before removing the battery and the SIM cards, ensure that your phone is powered off.

2.3

Installing a microSD Card

You can install a microSD card to expand the memory capacity of your phone. When inserting the microSD card, ensure that the golden contact area on the microSD card is facing downward.

2.4

Charging the Battery

To charge the battery, d o the following: Connect the smaller end of the USB cable (should be shielded cable) to the charger jack of

the phone and the larger end to the charger.

Connect the charger to a power socket. Wait until the battery is fully charged.

During the charging, the charging icon is displayed in animation. When the charging icon becomes static, it indicates that the battery is fully charged.

Disconnect the charger from the power socket and then from the phone.

2.5

Working with the Main Menu

1. In standby mode, press (Menu) to access the main menu.

2. Press to scroll to the desired submenu, and t hen press or (OK)

to access the submenu.

3. Press to scroll to an option, and then press or (OK) to access the

option.

4. Press (Back) to return to the previous menu.

To return to the standby mode, press

2.6

Accessing a Shortcut Menu

1. In standby mode, press to scroll to the desired shortcut menu.

2. Press to access the menu.

2.7

Phone Lock

The phone lock protects your phone from unauthorized use. By default, the phone lock is disabled. Once the phone lock is enabled, you are required to enter the phone code each time you power on the phone.

To enable the phone lock, do the following:

1. Select Menu > Settings > Security settings > Power-on password

2. Enter the phone code, and then press or (OK).

You can change the default phone code (1234) to any numeric string of four to eight digits.

To change the phone code, do the following:

1. Select Menu > Settings > Security settings> Power-on password> Mo dify.

Enter the old phone code, and then press

Enter the new phone code, and then press Enter the new phone code again to confirm it. If you forget the phone code, contact the service provider.

2.8

Udisk

When the phone is connected to a personal computer (PC) through a USB cable, options such as Udisk are displayed on the phone screen.

or (OK).

When you select Udisk, you can manage the files stored in the phone memory and on the microSD card.

The microSD card and the phone memory are displayed as removable disks on the PC. You can perform the following operations:

Double-click a disk to open it. Copy, paste, or delete files on a disk. Disconnect the phone from the PC.

 Ensure that you connect and disconnect the USB cable properly.  D o not run the formatting command on the PC to format the phone memory. O therwise, the phone

memory may get permanently damaged.

 You can transfer data and charge the battery by connecting the phone to the PC through the USB

cable.

2.9

PIN and PUK

The personal identification number (PIN) protects your SIM card from unauthorized use. The PIN unblocking key (PUK) unlocks the blocked PIN. Both the PIN and the PUK are provided with the SIM card. For details, contact your service provider.

SIM1 and SIM2 PINs are configured separately. To enable the PIN lock, do the following:

Select Menu > Settings > Security settings> PIN >SIM1, SIM2 or SIM3 > Activated.

Enter the PIN, and then press

If you enter wrong PINs a specified number of times consecutively, the phone prompts you to enter the PUK.

If you enter wrong PUKs a specified number of times consecutively, the SIM card becomes permanently invalid. In that case, contact your service provider for a new SIM card.

2.10

Locking the Keypad

To lock the keypad, press and hold in standby mode for 3s. To unlock the keypad, press If the Auto keypad lock function is enabled and if the phone is in standby mode for a

preset period, the phone locks the keypad automatically.

or (OK).

(Unlock) and then (Left soft key).

To enable the Auto keypad lock function, select Menu > Settings > Security settings > Auto keypad lock, scroll to a preset duration, and then press

select the duration.

When the keypad is locked, you can press , or (Left soft key) to answer a call or make an emergency call.

2.11

Entertainment

 Audio player: to play the audio clips stored on the microSD card.  Video player: to play the video clips stored on the microSD card.  FM radio: to listen to the radio.  Recorder: to record audio clips.  Video recorder: to record video clips.  Camera: to take pictures.  Image browser: to view the pictures stored on the microSD card.

or (OK) to

3 Voice Services.................................

3.1

Making a Call

1. In standby mode, enter the phone number.

a) To make an international call, press

enter the country or region code, area code, and phone number in sequence.

b) To call an extension, enter the phone number, press

enter the extension number.

2. Press

3. Press

3.2

When there is an incoming call, do the following:

1. Press

2. Press

3. Press

4. Press

to select SIM1/2/3 and dial the number.

to end the call.

 You can also make calls through call logs, contacts, and message.  During a call, you can press to adjust the volume.

Answering a Call

, or (Left soft key) to answer the call. (Right soft key) to reject the call. (Silent) to mute the speaker, and then press (Reject) to

reject the call.

(Silent) to mute the speaker, press , or (Answer)

to answer the call.

to enter the plus sign (+), and then

to enter P, and then

4 Latin input mode...........................

To write messages, there are two writing methods:

- Normal: this mode allows you to type a text by choosing a letter or a sequence of characters associated with a key.

- Predictive with the Zi mode: This mode speeds up the writing of your text. Fn key

Sym key :

Space key

Shift key

Del key

Press once: input top-half character.

Press twice: lock top-half character inputting mode, then press once to unlock top-half character inputting mode.

Short keypress: access the Symbols table Long keypress & Fn + Sym: popup smileys page

Short press: input space Long press: press to switch language

Fn+Space: switch input mode

In abc (Multitapabc) input mode (no Abc mode):

Short press once: to Short press twice:

In eZiabc (Smartabc) input mode: Short press once: to eZi ABC Short press twice: to eZi Abc

Short keypress: delete one by one

Long keypress: delete one by one quickly

ABC

to Abc

5 Call Logs..........................................

5.1

To Check Call Logs

1. Select Menu > Call logs.

2. Select Dialed Calls.

3. Press to scroll desired record, press to check detailed information.

4. Press (Options) to select Details, Call, etc.

5. The operations in Received calls, Missed calls and Rejected calls are the same as

Dialed call.

6. Select Delete all to delete all call logs.

5.2

To Check Call Timers, Call Cost, and GPRS Counter

1. Select Menu > Call logs.

2. Select Call timers and select SIM1/2/3 to enter to check Last call, Received calls,

Dialed calls, and Call history. Press

3. Select GPRS counter and select SIM1/2/3 to enter to check Last sent, Last received,

Total sent, and Total received. Press

or (Reset) to reset all records.

6 Contacts.............................................

6.1

Creating a Contact

1. Select Menu > Contacts >Options >New.

2. Select Phone, SIM1, SIM2 or SIM3 for saving the contact.

3. Enter the contact information.

4. Press (Save) to store the contact.

6.2

Searching for a Contact

1. Select Menu > Contacts > Options >Search.

2. Enter the first letter of the contact name.

3. Press

to scroll to the desired contact.

6.3

Send Message to a Contact

1. Select Menu > Contacts > Options >Write message.

2. To select write SMS or MMS.

3. After completing a SMS, press

(Options) to select Send to send the message.

4. After completing a MMS, press

SIM1/2/3 to send message.

6.4

Call the Contact

1. Select Menu > Contacts > Options > Call.

2. Select SIM1/2/3 to call the contact.

6.5

Send vCard

1. Select Menu > Contacts > Options > Send vCard.

2. Select SMS or Bluetooth.

3. Input Recipients and select SIM1/2/3 to send vcard.

4. Activate Bluetooth to search other wireless device to transmit vcard.

6.6

Delete and Mark Contacts

1. Select Menu > Contacts > Options > Delete.

2. Press

or confirm to delete the desired contact.

3. Select Menu > Contacts > Mark.

4. Mark one or more contacts to do further operations such as delete, copy, etc.

6.7

Copying Contacts

You can copy contacts to SIM1, to SIM2, to SIM3, to phone, or copy to card.

Copying One Contact

1. Select Menu > Contacts.

and select SIM1/2/3 to send, or press

(Options) to select Send, and choose

2. Press to scroll to the desired contact.

3. Press

4. Select To SIM1, To SIM2, To SIM3, T o Phone, or Copy to card to copy the contact to

Copying Multiple Contacts

1. Select Menu > Contacts.

2. Press

3. Press

4. Press

6.8

1. Select Menu > Contacts > Others.

2. Select Speed dial settings to set number 2-9 as speed dial keys.

3. Select Caller ID to save the own number, each SIM card can be saved 2 numbers.

4. Select Memory status to check memory status of SIM1, SIM2, SIM3 and Phone.

5. Select Single/Double line display to set display contacts list as single line or double

(Options), and then select Copy.

the desired location.

(Options), and then select Copy all.

to scroll to the desired option, such as SIM1 to Memory Card, SIM2 to

Memory Card, SIM3 to Memory Card, etc.

or (OK) to copy contacts to the desired location.

More Operations of Contacts

line.

7 Internet...............................................

This function allows you to acquire or visit diversified services on the Internet through message or network. Please contact your network operator for more information. Select SIM1/2/3 to enter:

Homepage: start a connection to the default URL Bookmark management: to check bookmark list or press

new bookmark.

History: to check browsed pages Offline pages: to check the pages stored Go to URL: input URL address and link to it Tool: select to Clear cache, Clear cookies, and do operations for Settings.

(Options) to add

+ 30 hidden pages

TCT Mobile 261 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual