TCL Communication N024 Users Manual
quick start
guide
BBE100-2
quick look
Microphone
Headset
connector
Front camera
Back key
Microphone
Receiver
Notification
LED
Sensors
Volume up/
down key
Power key
Convenience
key
Home key
Recents key
Speed key
Space key
(Fingerprint
sensor)
Speaker
USB Type-C
1
insert sim card
1. Insert the SIM tool (included) to where illustration shown above.
WARNING! Do not insert the SIM tool into the hole located at
the top of the device as this is a microphone. If inserted, this may
cause damage to your device.
2. Remove the tray.
3. Set the Nano SIM card into the smaller section of the tray,
aligning the notched corners.
4. Optional, set a media (micro SD) card into the larger section of
the tray.
5. Push the tray into the slot.
2
charging the battery
Connect the battery charger to your phone and power source
respectively.
Tip: To reduce power consumption and energy waste, when the
battery is fully charged, disconnect your charger; switch o Wi-Fi,
GPS, Bluetooth or background-running applications when not in use;
reduce the backlight time, etc.
WARNING! Please note your phone is a unibody device, the back
cover and battery are not removable.
3
EN
Safety and product information
Safety information
Before you start using your BlackBerry smartphone (hereinafter referred to
as smartphone), review the safety and regulatory information provided in this
document. Keep this document in a safe place so that you can refer to it whenever
you need it.
In some countries there may be restrictions on using Bluetooth enabled devices and
wireless devices with encryption software. Check with your local authorities for the
restrictions in your area.
Important safety precautions
Use only approved batteries and chargers with your smartphone.
Use of batteries or chargers that have not been approved by the
manufacturer might present a risk of fire or explosion, which could
cause serious harm, death, or property loss.
Use only the manufacturer approved holsters. Use of holsters that
have not been approved by the manufacturer may cause your
smartphone to exceed radio frequency exposure standards.
Keep the smartphone at least 0.39 in. (10 mm) away from your
body. When you carry the smartphone on your body, use only
accessories equipped with an integrated belt clip, and if the
accessory is not supplied by the manufacturer, verify that the
accessory does not contain metal. If you do not follow these
guidelines, your smartphone may exceed radio frequency exposure
standards. Whether there are any long term health eects of
exceeding radio frequency exposure standards is a subject of
ongoing scientific study.
For more information about the compliance of this smartphone with
the FCC radio frequency emission guidelines, visit www.fcc.gov/oet/
ea/fccid and search for the FCC ID for your smartphone listed below.
• FCC ID: 2ACCJN024
Your smartphone is designed to be operated in temperatures
between 32 and 113°F (0 and 45°C). Use of your smartphone outside
of the recommended temperature range could cause damage to your
smartphone or lithium-ion battery.
Do not rely on your smartphone for emergency communications.
The wireless networks that are necessar y to make emergency calls
or send messages are not available in all areas, and emergency
numbers, such as 911, 112, 119, or 999, might not connect you to
emergency services in all areas.
Your smartphone and smartphone accessories are not intended for
children. If you allow a child to use or handle your smartphone or
smartphone accessories, ensure you strictly supervise the child.
Your smartphone contains small parts that are choking hazards to
children.
Keep your smartphone away from medical devices, including
pacemakers and hearing aids, because they might malfunction and
cause serious harm or death to you or others.
Do not put your smartphone in contact with liquids because this
might cause a short circuit, a fire, or an electric shock.
When you use your smartphone speakerphone, never hold the
smartphone to your ear. Serious and permanent hearing damage
could occur.
4
Loading...