TCL Communication B022 User Manual

User Manual
This product meets applicable national SAR limits of 1.6W/kg. The specic maximum SAR values can be found in the section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain
www.sar-tick.com
Safety Precautions
Read the safety precautions carefully to ensure the correct and safe use of your wireless device.
Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger.
Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus.
Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft.
Switch off your device near high-precision electronic devices. The device may affect the performance of these devices.
Do not attempt to disassemble your device or its accessories. Only qualied personnel are allowed to service or repair the device.
Do not place your device or its accessories in containers with strong electromagnetic eld.
Do not place magnetic storage media near your device. Radiation from the device may erase the information stored on them.
Do not put your device in a high-temperature place or use it in a place with ammable gas such as a gas station.
Keep your device and its accessories away from children. Do not allow children to use your device without guidance.
Use approved batteries and chargers only to avoid explosion.
Observe the laws or regulations on device use. Respect others’ privacy and legal rights when using your device.
It is recommended that the equipment only be used in the environment where temperature is between 0°C and 45°C and humidity is between 10% to 90%. Keep the equipment in the
2
environment where temperature is between -10°C and 70°C or humidity is between 10% to 90%.
CHARGERS
Mains powered chargers will operate within the temperature range of: 0°C to 40°C. The chargers designed for your device meet with the standard for safety of information technology equipment and ofce equipment use. They are also compliant to the ecodesign directive 2009/125/EC. Due to different applicable electrical specications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only.
1. Web UI conguration
1.1 login the conguration page
Open the browser, and then input the address The default login password is admin.
1.2 Icon description
The icon description as bellow:
Category Icon Display
Signal Strength
From no signal to excellent
Network Status
SMS
Home
Battery
Disconnect, Connected, Roaming
Normal, New message, SMS box full, View Message
click to go back to Home page
Battery Level
2G: EDGE, GPRS;
http://192.168.1.1.
Network Type
Connection Status
Usage
Wi-Fi status
3G: HSPA, HSUPA, UMTS; 3G+: HSPA+, DC-HSPA+; 4G: LTE
Connected, Disconnected
Usage Data
Wi active with connected Devices
Tab 2.1
3
2. Connection
Click “Connection” area to open connection menu, including connection info, upload/ download usage (for a connected duration), network technology, battery status, number of device connected are included.
2.1 Connection Information
¾ Turn on/off Key: connect/disconnect from internet; ¾ Network information: display Operator name, if network is roaming, the icon “R” appeared
on right of operator name, otherwise, hidden “R” icon;
2.2 Usage Information
A current usage time and data is displayed
¾
Total time duration for current connection in HH;MM (e.g: 12Hrs 02 Mins);
¾
Total data for current connection in MB or GB;
2.3 Signal & Technology Info
Signal icon: Shows the signal strength, Icon is grey if no service;
¾
¾
Network technology: 2G, 3G, 3G+, 4G in different network; Icon is empty in disconnected
and no service status;
2.4 Battery information
Lower power
¾
¾
Different battery level
2.5 Connected devices information
This component shows the connected devices to this device.
¾ Device list edit: click “numbers” to view detail connected devices. Click
device name, and
¾ Block list edit: click “Block” or “unblock” to manage device list, but USB Device cannot be
blocked
to save the changes, click any other area to give up the changes;
to edit the
3. Usage
Click “Usage” area to open usage status menu, display usage info in home and roaming status, including upload/download data transfers.
3.1 Usage information
¾ Home: local download + upload usage, current Volume/total Volume; Clear all data when
start a new period cycle; ¾ Roaming: current Roaming Data and Total Roaming Data ¾ Duration: Duration time for each connection; Total time duration for a specied connection
period;
4
Loading...
+ 9 hidden pages