TCL Communication B005 Users Manual

Y860OA Case Quick Start

1.

Device holder

2.

Product sticker

3.

Protective folio

4.

Magnetic stand

5.

Power Key

6.

OLED screen

7.

SIM Card slot

8.

SD Card slot

9.

Reset hole

Getting to Know Your Case

Set Up Your Case

1. Insert a SIM-Card into the SIM-Card slot

2. Press power key to power on the case;

3. Find out the SSID(network name) on product sticker; (Y860-XXXX)

On your device:

4. Select the network name on your device and enter password; (password is
the same as last 8 digits of Device ID)

5. Start to access to internet

Expanded memory- Micro SD Card

You can insert a Micro SD card (up to 32GB) to the Micro SD card slot for
expanded memory using.

Detaching your device

1. To detach your device from case, move back one of the holder

2. Your device is then released.

Storing your device for travel

1. Insert your device in the case holder

Icon

Description

Animating

The battery is charging.

Solid display

The battery is fully charged (100%)

Quick blinking

Battery power is low (less than 15%). Recharge the battery.

Network name
Network indicator

Battery

Signal strength

Connected to 4G LTE network

Connected to HSPA+ network

XXX

2. Close the folio.

OLED Screen

Network Indicators

Your case will display one of the following network indicators to let you know
which networks you are connected to.

Battery status icon

Charging the battery

If the battery status icon is quick blinking, the case battery needs to be
charged.

1. Plug the micro-USB cable into charging port, and the other end into a USB

port of a 5V/2A charger. The status of battery icon changes to animating as
the battery charges.

2. Charge the battery until the battery icon is solid display, then you can

unplug the device and charger.