TCL WF76RL1500 User Manual

PRODUCTS USERMANUAL

WIFI Module

WF76RL1500

IEEE

Model Number:

802.11b/g/n

WF76RL1500

1T/1R

Product Description

TCL WF76RL1500 is a high-gain and low power consumption wifi mudule . You can
use it on IEEE802.11b/g/n wireless Local Area Networks and USB 2.0 Wi-Fi
Dongle.It fully complies with IEEE 802.11n and IEEE 802.11b/g feature rich wireless
connectivity at high standards,delivers reliable,cost-effective,throughput from an
extended distance.

Product Features

◆ Complies with IEEE 802.11g; 802.11b; 802.11n standard for 2.4GHz Wireless
LAN.

◆ Supports Ad-Hoc/Infrastructure modes
(This device supports Ad-Hoc mode, however Ad-Hoc is only possible in the

channels 2412-2462MHz and 2422-2452MHz as this is fixed in the firmware of the
module, it can not operate outside the certified channels as indicated in this FCC
certification filing.)

◆ Supports PC Card hot-SWAP and true Plug & Play.

◆ Works with all existing network infrastructure.

◆ Supports Wi-Fi Protected Setup (WPS) configuration function

◆ Capable of up to 128-Bit WEP Encryption.

◆ Freedom to roam while staying connected.

◆ 22-Mbps Packet Binary Convolution Coding (PBCC)

(according to the IEEE Std 802.11b high-rate specification ).

◆ UP to 54 Mbps High-Speed Transfer Rate in 802.11g mode of operation.

◆ Integrated Antenna.

◆ Supports Windows 2000, XP32/64,Vista32/64,Linux

◆ Low power consumption.

◆ Easy to install and configure.

PAGE 1 OF 3

Version 1.0

PRODUCTS USERMANUAL

WF76RL1500

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference

to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interferencereceived, including interference that
may cause undesired operation.

Caution:

Any changes or modifications not expressly approved by the party responsible for
compliance could void

FCC Important Notes:
(1)
FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body and must
not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

The devices must be installed and used in strict accordance with the manufacturer’s
instructions as described in the user documentation that comes with the product.
Modular could be only used in mobile or fix device, and could not be used in any
portable device.

PAGE 2 OF 3

Version 1.0