TCL vp206, vp408, vp412 Quick Start Manual

VOICE PRO

VP206, VP408, VP412

Quick Start Guide

VP408 VP412

VP206

ALL IN ONE

VOICE MAIL AND PHONE SYSTEM

FOR SMALL OFFICE AND Home OFFICE

Remove contents from box.

1.

Check for the following:
– Voice Pro system
– Power supply (wall mounted transformer that plugs into

AC outlet)
– Documentation package
– Two double-ended, 7-foot line cords (6 for VP408 and VP412)

1909 N. Glenville Dr. #100 • Richardson, Texas 75081
Tel: [phone]
www.voicelogicinc.com • Email: janderson

– Two 6-inch line cords for VP206 (four for VP408 and VP412)
– One line splitter that plugs into phone jack (2 for VP408

and VP412)

– One extension splitter that allows a 2-line phone to plug

into two extensions on the Voice Pro (2 included for

VP408 and VP412)
– One double-ended 3.5mm music cord
– One template to wall mount Voice Pro

•

Fax: [phone] • Toll-free: 888.671.8108

@voicelogicinc.com & [e-mail]

Sold by:

http://www.TWAcomm.com
Toll Free: [phone]

Sold by:

http://www.TWAcomm.com
Toll Free: [phone]

Powering up the Voice Pro.

2.

a.) Place the Voice Pro on the desk or (using the wall

mount template) mount Voice Pro on the wall.

b.) Plug power supply into AC outlet. Connect the male con-

nector to the power jack on the rear of the Voice Pr o system.

c.) After connecting the power supply, the red power light

should be illuminated, and the green light should flash.

The Voice Pro system supports up to 6 telephone extensions.

Single (one) line telephones plug directly into the desired
jack on the Voice Pro.

As many as 6 devices may be connected – corded or cordless
phones, fax machines or even credit card machines.

Connecting 2-line telephones to Voice Pro.

4.

Connecting 1-line telephones to the Voice Pro.

3.

If you are connecting a 2-line telephone to the Voice Pro,
proceed as follows:

a.) If your 2-line telephone has 1 jack on the back of

the telephone:

- Connect a line cord to the rear of the telephone.

- Connect the other end of the line cord to the splitter.

Use the two 6-inch line cords to connect to the splitter then
to the desired extensions of the Voice Pro.