P3801S
QUICK START GUIDE
HXD401300269
BC
What's in the box
Model No.
机种型号
:K150B1950779E1
S/N
样单号码
: K42741
Size
规格: 150W Series
Rev 版本: A0
Issue Date
发行日期:23-01-24
Sheet No.
页码: 8 OF 12
观尺寸图（单位：毫米）:
WELLDONE
WD-304
Projector x1 Remote control x1
Quick start guide x1
Power Adapter x1
Note: The actual contents may vary depending on the country (or
region) of sale. please refer to the actual product. Depending on local
regulations, batteries may not be included in the package and you
need to purchase batteries separately.
Power cable x1
AAA Batteries x2
EN-1
Getting started
Projection screen
D
SD
Determine the distance between the projector and the wall or screen
according to the desired screen size.
Screen Dimensions (SD) Throw Distance (D)
45" 49.60"
50" 54.33"
60" 64.96"
70" 75.59"
80" 86.22"
90" 97.22"
100" 107.87"
110" 119.29"
120" 129.92"
Screen Dimensions (SD): The diagonal size of the projection screen (in).
Throw Distance (D): The distance between the projector and the wall
or screen (in).
Note: The dimensions in the table above are for reference only, they
are approximate and may slightly differ from the actual values.
EN-2
Power up
Connect your power cable to the projector, then plug it in to the
wall outlet.
Power your projector remote by inserting the included batteries.
Note:
• Pay attention to the positive and negative poles when installing
batteries in the remote control.
• When battery leaks, immediately wipe away any fluid with a dry
cloth and replace the batteries with new ones.
• Dispose of used batteries according to local waste disposal rules
and regulations of the country or area you live in.
EN-3
Product Overview
Projection Lens
Camera
Heat dissipation vents
Note:
• Do not place objects within 8 in near the heat dissipation vents.
• Do not place any objects near the vents, as this may cause heat
to build up inside the projector.
• Do not look directly into the lens so as to avoid eye damage as
this projector emits strong light during use.
EN-4
NAVIGATION PAD
Power
Volume +/-
Note: When plugging in the power source for the first time, the power
button light will flash for 3 seconds then turn solid.
• Touch the power button and all button lights will light up to
activate the device.
Back
Autofocus
Confirmation
• The button lights will remain lit for 30 seconds after the last touch.
Note: Please do not wear gloves when pressing the buttons, use your
fingers to touch directly. Dry or humid weather may affect the touch effect.
Remote Control Pairing
1. Press and hold Home and Back buttons at the same
time for 3 seconds.
2. The remote control light will flash red for 3 seconds, then release
the buttons and wait for pairing.
Note: Keep the remote control within 12 in of the projector.
EN-5
Remote control
Power: Power on/off
Input: Select the input source
Focus：Adjust the picture clarity
Google Assistant: Press the Google
Assistant button on your remote to
talk to Google Assistant.
Dashboard: Access Dashboard panel
NAVIGATION PAD: Move up,
down, left, or right, then press the
middle button to confirm
Back: Return to previous screen
HOME: Return to home screen
Menu: Display projector settings menu
Volume +/-：Adjust the Volume
YouTube: Launch YouTube
Netflix: Launch Netflix
Prime video: Launch Prime Video
EN-6
Connectivity
DC: Connect your projector to the power source with the
included power cable.
HDMI: Connect cable box, Blu-ray player, gaming console, or
other devices to your projector using HDMI cables.
IR Sensor: Remote control signal reception.
USB: Connect a USB device to access photos, music, and movies
Audio Out: The projector has a built-in speaker that can play
audio, you can connect the projector to external self-powered
speakers through the Audio Output port.
Power on your equipment
1. Plug in the projector. The power light turns on.
2. Press the power button on the body or remote control to turn
it on.
3. The following screen appears.
EN-7
Dashboard
4. Connect to your wireless network by selecting Dashboard >
Settings > WiFi.
Now you can enjoy pre-installed apps on your projector.
Connect to computer or video
device
1. Turn on your computer or video device.
2. Connect one end of an HDMI cable to the projector’s HDMI
port and the other end to an HDMI port on your video device
or computer.
3. Find Inputs from the Home Screen or Settings and select HDMI.
Bluetooth Speaker Mode
Your projector can also be used as a speaker.
1. Press button on the remote control to enter the projector
settings menu.
2. Select Bluetooth Speaker Mode and turn it on.
3. Following the instruction to pair with the preferred device.
Note: If the Bluetooth connection is not established within the time
specified, the projector will turn off the screen. You can press and
hold for more than 2 seconds to turn the screen back on to
reconnect the Bluetooth device.
You can turn off the Light-Strip in the Bluetooth speaker mode, Go to
Settings > Advanced Settings by pressing button.
EN-8
Keystones & Focus
Projector's autofocus feature ensures that the projected image is
as sharp as possible without the user having to manually adjust the
projector's focus.
There are three ways to enable Autofocus on TCL Smart Projector:
1. Turn on Autofocus by going to Settings > Projector > Focus
> Auto Focus.
2. Gently move the projector to trigger the autofocus mechanism.
3. Press and hold the Focus button on the remote to
trigger autofocus.
Activate manual keystone with the following steps:
Go to Settings > Projector > Image Correction > Manual Keystone
Correction.
Note: When you power on the projector or move it to another
location, the projector automatically performs keystone correction.
You can turn on Auto Keystone Correction in projector Settings.
Ceiling installation instructions
Note: The projector accepts 1/4" thread screw for installation
purposes. Do not hang anything on the projector when hanging.
EN-9
Specifications
Name TCL Projector A1
Model P3801S
Basic information
Electrical Specifications Power Consumption 150.1 W
Optical Parameters
System
Audio
Others
Dimensions(L*W*H)
Weight 2.57 KG/5.7 LB
Resolution 1920 x 1080
Projection ratio 1.25:1
Focus Auto focus
Keystone
Correction
Maximum
projection size
Operating System AndroidTM 11 for TV
Connectivity
Dolby Decoder Dolby Audio
Speaker Output 8W x 2
Noise <30 DB
Operating
temperature
191.3*128.1*263.6 mm
/75.3*50.4*103.8 in
Omni-directional autokeystone correction
45"-120"
WiFi, Bluetooth 5.1,
USB 2.0, HDMI,
3.5 mm output
32°F to 104°F
EN-10
Troubleshooting
Fault Solution
No image
Image is fuzzy
or blurry
No sound or the
volume level is
too low
Projector not
responding to
remote control
If projector has
overheated and
turned off
HDMI
connection
problem
Turn off the projector and disconnect from the
power, then plug in the power cord and turn on
the projector.
• Clean the projector lens with a soft cloth.
• Use auto focus or manual focus.
• Press volume buttons on the remote control.
• Adjust the volume level of the source device.
• Check that the remote control batteries are
installed correctly. If necessary, replace the
batteries.
• Ensure you are operating the remote control
within the reception angle and range of the
projector.
• Note: the projector will not respond to
remote commands when warming up or
shutting down.
Leave off and let it cool down for about five
minutes, then do the following:
• Ensure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• If the problem persists, unplug the projector
and restart in five minutes.
• Ensure the HDMI Input is selected on the
projector.
• Ensure the device is securely connected to the
projector's HDMI port.
• Remove and re-insert the power adapter from
the projector.
EN-11
FCC Compliance
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
For projector: This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment must
be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 8 in from all persons.
For remote control: The device has been evaluated to meet general
RF exposure requirement. The device can be used in portable
exposure condition without restriction.
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
For the receiver devices associated with the operation of a licensed
radio service, they bear the following statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
EN-12
(2) This device must accept any interference received, including
interference that may cause undesired operation.
FCC ID : 2ACCJB226
WARNING: Cancer and Reproduction
Harm-www.P65Warmings.ca.gov.
BATTERY
• Risk of fire or explosion if the battery is replaced by an incorrect
type. Dispose of Used Batteries According to the Instructions.
• Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types):
• Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result
in an explosion or the leakage of flammable liquid or gas;
1 YEAR LIMITED WARRANTY
TCL Technology Holding Limited, offers a 1 year limited warranty on
selected TCL devices that are found to be defective in materials or
workmanship upon submission of the following items:
1. The warranty card is properly completed and submitted,
and including;
2. Proof of purchase – consisting of original invoice or sales slip
indicating the date of purchase, dealer’s name, model and serial
number of the product.
General Terms and Conditions
This warranty is confined to the first purchaser of the product only
and is not applicable to cases other than defects in material, design
and workmanship.
EN-13
Items and Conditions Not Covered:
Periodic checks, maintenance, repair and replacement of parts due
to normal wear and tear.
Abuse or misuses, including but not solely limited to the failure to
use this product for its normal purposes or in accordance with TCL’s
instructions on usage and maintenance.
Defects resulting from usage of the product in conjunction with
accessories that are not approved by TCL for use with this product.
TCL will not be responsible for any repairs caused by third party
component parts, or service that is found to be the cause for the
defect or damage of the product.
Accidents, Acts of God, lightning, water, fire, public disturbances,
improper ventilation, voltage fluctuations or any cause beyond the
control of TCL
This warranty does not affect the consumers’ statutory rights nor
the consumers’ rights against the dealer related to their purchase/
sales agreement.
TCL’s 1 Year Limited Warranty will abide by the following options
regarding claims:
1. Repair the TCL product using new or previously used parts that are
equivalent to new in performance and reliability
2. Replace the TCL product with the same model (or with a product
that has similar functionality) formed from new and/or previously
used parts that are equivalent to new in performance and
reliability, also;
a. When a TCL product or part is replaced or provided, any
replacement item becomes the customer’s property and the
replaced or refunded item becomes TCL’s property
b. TCL will not provide any data transfer service. This is the customer’s
responsibility. TCL shall not be liable for the loss of any saved/
stored data in products that are either repaired or replaced.
Customer should maintain a separate backup copy of the contents
of the device’s data.
3. Repair or Replacement of any TCL product under the terms of this
warranty does not provide right to extension or renewal of the
warranty period.
EN-14
4. Warranty repairs are available free of charge at TCL authorized
repair centers for products that comply with the General Terms
and Conditions of this warranty. Shipping cost of the defective
product(s) to TCL authorized repair center is to be paid by the
customer. The customer is responsible for any damage to the
defective product during shipment to the authorized repair center.
5. This warranty is not transferrable. This warranty will be the purchasers’
sole and exclusive remedy and neither TCL nor its service centers
shall be liable for any incidental or consequential damages or breach
of any express or implied warranty of this product.
6. This warranty extends to products purchased and sold within the
United States and Canada. All products sold in United States will
be subject to their respective state and federal laws. All products
purchased in Canada will be subject to Canadian laws.
For more information on warranty of your device, please visit our
website: https://www.tcl.com
Google TV is the name of this device's software experience and
a trademark of Google LLC. Google, YouTube and Android are
trademarks of Google LLC.
Netflix is a trademark of Netflix, Inc. Manufactured under license from
Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol
are trademarks of Dolby Laboratories Licensing Corporation.
The terms HDMl, HDMl High-Definition Multimedia interface, HDMI
Trade dress and the HDMl Logos are trademarks or registered
trademarks of HDMl Licensing Administrator, Inc.
All brands contained herein are trademarks of their respective owners.
EN-15
Loading...