Page 1
Kitchen Center by TCC, LLC
315 West La Cadena,
Riverside, CA 92501
Tel: 888-822-5824
www.TCCkitchencenter.com
OWNERS / INSTALLATION MANUAL
KITCHEN CENTER
by TCC™
Copyright Kitchen Center by TCC 2006
Page 2
Warranty
Kitchen Center by TCC, LLC (the company) warrants that the Kitchen Center
appliances are free from defects in material and workmanship for a period of one
(1) year from the date of shipment:
The company will, at its option, either repair, replace, or issue credit for products
that prove to be defective during the warranty period.
For warranty service, look on-line at www.TCCKitchenCenter.com or call 888822-5824 for details of a distributor or a service facility near you.
LIMITATION OF WARRANTY
Ordinary maintenance, as specified in the Kitchen Center Owner’s Manual, is not
covered under the forgoing warranty.
The forgoing warranty does not apply to defects resulting from:
• Improper or inadequate maintenance of the Base
• Improper use or misuse of the Base
• Unauthorized modifications or repairs to the Base
• Use of the Base with unauthorized accessories
• Operation of the Base outside the specified environment
NO IMPLIED WARRANTIES
This warranty is exclusive. There are no other warranties expressed or implied.
LIMITATION OF LIABILITY
The company shall not be liable for, loss of use, consequential damages, or any
other claim based on breach of warranty. The company’s liability for damages of
any kind shall be limited to the purchase price of the defective unit.
13
Specifications
Power Base
Motor 600 watt
Motor speed settings:
1. 7000 RPM
2. 9000 RPM
3. 14000 RPM
4. 16000 RPM
5. 18000 RPM
Pulse 18000 RPM
Weight 9.8 lbs
Height 7 1/2”
Width 4 5/8”
Depth 10 1/8”
Blender
Height 11”
Width 7”
Weight (stainless steel jar) 2.4 lbs
(glass jar) 4.6 lbs
Capacity 6 cups
Mini Chopper
Height 5”
Width 7”
Weight 1.4 lbs
Capacity 2.5 cups
Mixer
Height 9”
Width 9 7/8”
Weight 5.4 lbs
Capacity 4 qts
309056
14
Page 3
112
Care and Maintenance
Your Kitchen Center Power Base and appliances are designed for ease of use
and minimal maintenance and should provide you with years of trouble free use
with the following easy care.
Maintenance
The Power Base is a self contained unit; no oil is required. Keep all liquids away
from the center shaft and clean the well if food should accidentally spill into it.
Cleaning
The Power Base keypad should be wiped clean with a soft damp cloth. Do not
spray cleaning fluids directly onto the power base and do not allow fluids to
puddle on the key pad or leak into the drive mechanism.
CAUTION:
Do not use harsh abrasive cleaners anywhere on the Power Base. They will
destroy the finish and damage the keypad.
Cleaning the appliances
Do not use scouring pads or harsh abrasives on any of your Kitchen Center
appliances. When you have finished using each appliance, turn off the Power
Base and remove the appliance from the Power Base.
Separate the parts of each appliance. The non moving parts, e.g. bowls and jars,
can be placed in the dishwasher. The bases, containing the gear mechanism,
and the blades should be gently hand washed in a mild detergent solution and
warm water. Be careful when washing and drying the blades, they are extremely
sharp!
Make sure the appliances are completely dry before storing.
Contents
Introduction ....................................................................................... 2
IMPORTANT SAFEGUARDS ...................................................................2
Contact Information ..................................................................................2
Unpacking and Setup ....................................................................... 3
Items you should receive .........................................................................3
Tools and supplies required for installation ..............................................3
Installation ......................................................................................... 4
Positioning the template ...........................................................................4
Making the cut ..........................................................................................5
Mounting the Power Base ........................................................................6
Replace the Top Plate and Keypad ..........................................................6
Installation above a drawer ......................................................................7
Instalation inside a drawer .......................................................................7
Using your Kitchen Center .............................................................. 8
The Keypad ..............................................................................................8
ON/OFF .............................................................................................8
Pulse .................................................................................................8
Speed Keys .......................................................................................8
Timer .................................................................................................8
Power LED ........................................................................................8
Attachments .............................................................................................9
The Blender ......................................................................................9
The Mixer ........................................................................................10
The Mini Chopper ...........................................................................11
Care and Maintenance ................................................................... 12
Maintenance ...........................................................................................12
Cleaning .................................................................................................12
Cleaning the Power Base ...............................................................12
Cleaning Attachments .....................................................................12
Specifications ................................................................................. 13
Power Base ............................................................................................13
Blender ...................................................................................................13
Mini Chopper ..........................................................................................13
Mixer .......................................................................................................13
CAUTION:
Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or electrical or mechanical adjustment. Any other servicing should be
performed by an authorized service representative
Page 4
The Mini Chopper
The Mini Chopper is made for convenience;
its lightweight polymer design is ideal for clear
visual dicing and chopping. It makes short work
of seasoned breadcrumbs, salsa, onions or pâté.
The separate protective base lets you stand the
mini-chopper on your counter top.
To assemble your mini-chopper:
1. Slot the three pins on the power post into the
matching indentations in the bottom of the jar.
2. Secure the locking cap to the top of the power
post by turning clockwise until it clicks.
3. Drop the blade assembly into place over the
power post.
4. Lock the lid into place on the jar with a “push
and turn” clockwise motion to engage the blades.
The blades are very sharp, handle with extreme
care
2
11
Introduction
The Mini Chopper attachment has been approved for indoor use
Congratulations on your purchase of a Kitchen Center. Before you try it out, take
outdoors
only. Do not operate the Mini Chopper with the Power Base
a few moments to read this Owners Manual and familiarize yourself with the
easy, convenient functioning of the power base and attachments.
IMPORTANT SAFEGUARDS
It is important to understand and observe the safety warnings and cautions in this
section and throughout the manual. If you do not have installation and electrical
experience, we suggest that you employ a professional installer to ensure that
the work is performed in accordance with required safety code.
Before using the Kitchen Center, read all the instructions and be sure to follow
the basic safety precautions listed below:
• The Kitchen Center Power Base and attachments are for household use only
• Never leave an appliance running un-supervised
• Close supervision is necessary when any appliance is used by or near
children
• Make sure the appliance is turned OFF when not in use, before changing
accessories or cleaning
• Do not remove the lid or place your hands near moving parts when the
appliance is operating
• Do not attempt to operate an attachment if it has been dropped or damaged
in any way. Contact your local distributor for repair or replacement
• Do not attempt to use parts or attachments not approved for use by
the manufacturer. Use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury
• Keep hands, hair and clothing well away from moving parts
• Always remove accessories from the power base before cleaning
• Never feed food into accessories by hand when operating; always turn off
the appliance before removing the lid
• Flashing light indicates ready to operate. Avoid any contact with blades or
moveable parts
• Do not expose to rain or use in wet condition
• If an extension cord is used, the instructions concerning the proper cord as
contained on pg. 15 should be followed
• Connect to a grounded type receptacle or use with an acceptable adapter
see pg. 15 for further directions
•
SAVE THESE INSTRUCTIONS
Contact Information
For service, ordering or if you have questions about the installation or operation
of your food center, contact your local distributor or:
Kitchen Center by TCC, LLC
315 West La Cadena, Riverside, CA 92501
Tel: 888-822-5824
www.TCCkitchencenter.com
To attach to the power base,
insert the mini-chopper power
post into the power base, push
down and turn clockwise until
snug.
Always disassemble the
mini-chopper to clean it. The
blades, cap and lid can be
placed into your dishwasher.
The power post should be
carefully washed and dried by
hand.
CAUTION
Keep hands and utensils away from the cutting blades while chopping food
reduce the risk of severe injury to persons or damage to the mini- chopper. A
scraper may be used but only when the mini-chopper is not running.
Blades are sharp. Handle carefully. To reduce the risk of injury, never place the
cutting blades on the base without first putting the bowl properly in place.
Make certain the cover is securely locked in place before operating the mini-
chopper.
Do not attempt to defeat the cover locking mechanism
.
Page 5
310
Unpacking and Setup
Items you should receive
When you receive your Kitchen Center, unpack it and check that the items shown
below are included.
Tools and supplies required for installation
• Kitchen Center Power Base
• Template
• Installation instructions
• Suitable cutting tool
• Carpenters pencil
Power Base
Template
Owner’s Manual
The Mixer
The Mixer with stainless steel bowl comes
with a whisk, a dough hook and a choice of
beaters.
To attach the mixer:
1. Insert the mixer base into the power base
and turn clockwise to lock.
2. Seat the bowl securely onto the mixer
base.
3. To attach the beater, push it into the
mixing arm until it clicks.
4. Insert the post of the mixing arm into
the mixer base through the center of the
bowl assembly. Make sure it engages
positively with the mixer base.
Begin mixing at lower speeds and adjust
gradually to suit your needs.
Depress the button on the mixer head to
remove the beaters or other attachments.
Remove the beaters from the mixer before
washing. To clean, place the bowl and the
beaters into the dishwasher. Wash the power
shaft and the mixing arm by hand. Make
sure to dry all items thoroughly before use or
storage.
½
The Mixer attachment has been approved for indoor
Base outside.
use only. Do not operate the Mixer with the Power
Page 6
4 9
Installation
Positioning the template
Position the template as shown below and draw a line around it.
and indoor use when used with the Kitchen Center Power Base
The Blender attachment has been approved for both outdoor
• At least 1” back from the inside edge of the base cabinet beneath the
countertop
• Keep at least 4” from any adjacent walls
• Allow at least 18” clearance between the countertop and any
overhanging cabinets
• Allow for a minimum depth of 8” beneath the bottom of the counter to
accommodate the Power Base
Note
A 15A/125V AC outlet must be pre-wired beneath the chosen location prior to
installation.
CAUTION
All electrical wiring must comply with local electrical codes.
Attachments
The attachments for the Kitchen Center
replace many small appliances. For more
options, visit www.TCCkitchencenter.com
The Blender
You can order the blender in glass or stainless
steel. Move smoothly through the five speeds on
the keypad or use the pulse key for a short burst
of power.
To assemble the blender:
1. Place the blades and gasket into the
blender base.
2. Attach the jar by turning clockwise until
snug.
3. Press the two part lid onto the jar.
To attach to the Power Base, place the blender
into the power base and turn clockwise until fully
seated
CAUTION
Do not run continuously for more than 3 minutes at a time.
Keep hands and utensils out of the blender jar when in use to reduce the
risk of severe injury to persons or damage to the blender. A scraper may be
used but only when the blender is not running.
Blades are sharp. Handle carefully. Always operate the blender with the
cover in place. When blending hot liquids, remove the centerpiece of the
two piece cover
The blender has an integral stable
base which allows you to stand it
on the counter. It is easily cleaned
in your dish washer. The plastic
base and the gasket should
be placed on the top shelf. Dry
thoroughly before use or storage.
Inside edge of counter top
Page 7
8 5
Using your Kitchen Center
The keypad
ON/OFF
The On/Off button powers the Base. For safety, activation of an appliance
requires the power button pressed first and then second key be pressed, the power
button alone will not activate the appliance.
Pulse
The Pulse key is active only when pressed and allows you to apply a short burst
of power, for instance when crushing ice or chopping.
Speed Keys
The Speed Keys incrementally increase the speed of an appliance to suit your
particular recipe or process.
Timer
The Timer and digital readout allow you to set a duration of up to 3 minutes. If
no time is set the motor will shut off automatically after 2 minutes of continuous
operation.
Power LED
A red LED next to the ON/OFF button on the keypad indicates power is being
supplied to the unit.
Making the cut
Drill a pilot hole if necessary then, using a suitable cutting tool, cut along the
inside edge of the template line. Your choice of tool should be dictated by the
material of your counter top.
Make sure that the outside edge of the cutting tool follows the inside edge
of the cut line at all times. It is very important that you do not exceed the
dimensions of the template.
At least 8" beneath the
bottom of the counter
For Evaluati
Page 8
6 7
Mounting the Power Base
1. Remove the top plate from the Power Base by gently prying it up until
you can squeeze and release the springs from the slots and set the
top plate aside.
2. Lower the Power Base into the cutout so that the keypad is towards
the front of the countertop. Center the unit within the cutout. Be very
careful not to crease the rubber sealing gasket as you slide the
power unit into place.
Replace the Top Plate and Key Pad
1. Align the top plate with the Power Base.
2. Squeeze the tension springs on the top plate until they slide smoothly into
the slots at each end of the Power Base.
3. Gently press the top plate into position.
4. Plug in the Power Base.
4. Using a flat blade
screwdriver, turn the
central mounting screw
clockwise. The clamp
bracket beneath the
counter will extend to
secure the unit tight
against the countertop.
Do not over tighten the
screw!
Installation above a drawer
The Power Base can be installed above a drawer if required. Check that the
drawer is deep enough to clear the power base before cutting. If necessary, make
a cutout in the back of the drawer as shown so that it will clear the Power Base
when the drawer is opened.
Installation inside a drawer
The Power Base can also be installed inside a deep drawer so that the keypad
is flush with the top of the drawer as shown. Consult with your installer to make
sure that the drawer has the minimum necessary dimensions and airflow and that
a suitable insert can be placed into the top of the drawer to support the weight of
the Power Base. The drawer must extend at least 16” inches past the counter top.
CAUTION
Make sure that the power cord has space to move freely without snagging
when the drawer is opened and closed.
For more installation information visit the www.TCCkitchencenter.com web site
Measure depth of drawer.
Must be at least 8" from
top of drawer to base
At least 8" clearance
needed from bottom of
counter to base
3. For use outdoors, make a liquid silicone ring (gasket) approximately
210mm x 330mm under the stainless steel cover base flange using
a tube of liquid silicone sealent, completely sealing the outer
flange area from rain leakage
*For Outdoor Use: [BBQ Islands, outdoor kitchens,
boat kitchen galleys, etc.]
When used for outdoor installation, install the Kitchen Center
stainless steel weatherproof cover [contact your local KC dealer]
between the outdoor countertop and Power Base flange.
For all outdoor use installations, follow the GROUNDING
INSTRUCTIONS and use of EXTENSION CORDS [see
page15 and figure 73.1 of this owners manual]
7
Page 9
Loading...