TBK vision RYK2611, RYK2685 Instruction Manual

Page 1
P. 1
2003/12/24 Ver:1.0 No:040041/1
SMOKE-DETECTOR
HIDDEN CAMERA
1. DESCRIPTION
Thank you very much for purchasing our product.
This B/W (COLOR) Smoke-Detector Hidden Camera uses a high sensitive
1/3” interline transfer CCD Image Sensor (CCD = Charge Coupled
Device), and all state circuitry which provides extremely long life and high
reliability. This Camera offers excellent image quality and functions with
low lag and high burn resistance, and is not subject to distortions from
magnetic fields. Highly resistant to shock and vibration and easy to install,
this Camera is an excellent choice for your B/W (COLOR) CCTV system.
INSTRUCTION M A N U A L
29
Page 2
P. 2
2. INSTALLATION
STEP 1:Select a location in the ceiling where you want to install the camera
unit.
STEP 2:Connect the cables as follows: 12V DC to A , Video Out to B .(Ref.
Figure 1)
STEP 3:With your hand, position the camera unit so the camera is aimed
toward the area to be observed.
STEP 4:While holding the unit in position, re-check the camera's horizontal
sighting to ensure the unit's position is correct as placed in Step 1. (Ref. Figure 1)
STEP 5:If it is necessary to adjust the vertical view angle, do the following -
Loosen screw D with a screwdriver. Turn the Camera Board C to the desired angle (you may use a portable monitor or communicate with the Master Control Room to make sure the view angle is correct). Tighten screw D to secure the vertical view angle. (Ref. Figure 1)
Figure 1 ( Steps 1 through 5 )
Page 3
P. 3
STEP 6:To secure the unit in the location selected in STEP 1, tighten the
screws E in the holes as shown in Figure 2.
Figure 2 (Step 6)
Page 4
P. 4
3. SPECIFICATIONS
Note: Design and specification are subject to change without prior notice.
Model Type.
Color 1/3” CCD High Resolution
Color 1/3” CCD
N
ormal Resolution
Color 1/4” CCD
Normal Resolution
B/W 1/3” CCD
High Resolution
B/W 1/3” CCD
Normal Resolution
B/W 1/3” CCD
Normal Resolution
Image Pick-up Device
SONY 1/3” Super HAD
CCD sensor
SONY 1/4” Super
HAD CCD sensor
SONY 1/3” Super HAD
CCD sensor
SAMSUNG 1/3”
CCD sensor
Effective Picture Elements (H×V)
NTSC:768×494
PAL: 752×582
NTSC: 510×492
PAL: 500×582
EIA: 768×494
CCIR:752×582
EIA: 510×492
CCIR:500×582
Horizontal Resolution
470 TV lines 380 TV lines 330 TV lines 420 TV lines 400 TV lines
Minimum Illumination
0.4LUX@F2.0 0.2LUX@F2.0 0.5LUX@F2.0 0.1LUX@F2.0 0.3LUX@F2.0
Auto Electronic Shutter
NTSC: 1/60s ~ 1/100,000s,
PAL: 1/50s ~ 1/110,000s
EIA: 1/60s~1/100,000s,
CCIR: 1/50s~1/110,000s
S/N Ratio
More than 48dB
Auto white Balance
Yes (2500K~9500K) -
Auto Gain Control
Ye s.
Gamma Characteristic
0.45
Lens Furnished
Cone Lens 3.7 mm / F2.0
Synchronous System
Internal, Negative sync.
Video Output
1 Vp-p / 75 Ohms. BNC or F connector
Audio Output (optional)
2 Vp-p / 50 Ohms, RCA connector -
Power Supply
DC 12V ± 10%
Power Consumption
220 mA 120 mA 110 mA
Operating Temp.
-10 to 50 (14 to 122℉)
Loading...