Taylor Freezer C716 General Manual

Item No.

C716

®

C716

Soft Serve Freezer

Twist, Pump, Heat Treatment

Features

Offer all the popular soft serve variations from low to non-fat
ice creams or yogurt. Serve two separate soft serve flavors,
or an equal combination of both in a twist.

Heat Treatment System

Provides a daily heating and cooling cycle to safely maintain dairy products
up to two weeks before a complete disassembly and cleaning is required.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Mix Hopper

Two, 20 quart (18.9 liter). Separate hopper refrigeration (SHR) maintains mix
below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights

Digital readout displays hours since last brush cleaning to assure product
safety. Mix Low light alerts operator to add mix. Audible alarm may be
enabled to sound when mix is low. When the Mix Out light flashes, the unit
shuts down automatically to prevent damage.

Integrated Syrup Rail Option - 2 room temperature with lids & ladles, 2

heated with syrup pumps

Touch Screen Controls

Microprocessor touch controls are embedded in durable tempered glass
panel. Multiple languages are selectable. Viscosity is continually measured
to dispense consistent quality soft serve desserts. Temperatures in the
hoppers or freezing cylinders may be displayed at any point of operation, in
either Fahrenheit or Celsius. Draw counter allows operator to view number of
servings dispensed.

Standby

During long no-use periods, the standby feature maintains safe product
temperatures in the mix hopper and freezing cylinder.

Two Locking Casters

Front casters have a locking feature for operators to keep equipment in
place. The lock can be released to move the equipment for cleaning.

Door Interlock System

Protects the operator from injury as the beater will not operate without the
dispensing door in place.

Freezer Door

A specially designed thermo-plastic door allows quick ejection of product
with a simple movement of the draw handle. Self closing draw handles are
standard.

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

C716 Soft Serve Freezer

39-11/16

36-3/16

(919)

28-1/4

(718)

(1008)

1 (25)

52-1/2
(1334)

14-9/16

(370)

28-9/16

(726)

4-3/4
(121)

C716

AIR IN
(BOTH

SIDES)

Weights lbs. kgs.

Net 827 375.1
Crated 942 427.3

cu. ft. cu. m.

Volume 67.4 1.91

Dimensions in. mm.

Width 25-7/16 646
Depth 36-3/16 919
Height 60 1524
Floor Clearance 4-3/4 121

*Mounted on standard casters

Electrical Maximum Minimum Poles (P)
Fuse Size Circuit Ampacity Wires (W)

Left Right Left Right

208-230/60/1 Air 35 35 28 25 2P 3W
208-230/60/1 Air, Syrup 40 35 29 25 2P 3W
208-230/60/1 Water 35 35 25 25 2P 3W
208-230/60/3 Air 25 20 20 17 3P 4W
208-230/60/3 Air, Syrup 25 20 21 17 3P 4W
220-240/50/1 Air 30 25 23 20 2P 3W
380-415/50/3N~ Air 12 10 12 9 4P 5W

This unit may be manufactured in other electrical characteristics. Refer to the
local Taylor Distributor for availability.

(For exact electrical information, always refer to the data label of the unit.)

25-7/16

(646)

22-1/2

(572)

AIR

OUT

EXHAUST
TOWARDS
FLOOR

60

(1524)

57-15/16

(1472)

52-1/2
(1334)

44-1/2
(1130)

NOTE: FIGURES IN PARENTHESES INDICATE MILLIMETERS

7-1/4
(184)

4-1/32

(102)

9-5/16

(237)

11-1/16

(281)

TOP VIEW - OPERATOR END

ALL CONNECTIONS LOCATED

UNDERSIDE OF BASE

1-3/32 (28)
ELECTRICAL
HOLE (2)

1-3/4 (44)
ELECTRICAL
HOLE

Specifications

Electrical

Two dedicated electrical connections are required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to
prevent recirculation of warm air. Minimum air clearances must be met to
assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Options

• Cone Dispenser

• Drain Adaptor (for ease of rinsing & cleaning)

• Draw Valve Lock Kit

• Faucet

• Hopper Locks

• Panel Spinner

• Syrup Rail (Integrated)

• Syrup Rail Kit (side mount)

Bidding Specs
Electrical: Volt Hz ph
Neutral: Yes  No Cooling: Air Water NA

Options:

Taylor Company,

Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Continuing research results in steady improvements; therefore,

these specifications are subject to change without notice.

062077-ADV 11/11