Taxitronic TX52 User Manual
TX52
USER’S MANUAL
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
INDEX
1.- SWITCHING THE TAXIMETER ON
2.- OPERATING THE TAXIMETER FOR A SERVICE
2.1.- HIRED POSITION
2.2.- INTRODUCING EXTRAS IN HIRED
2.3.- STOPPED POSITION
2.4.- CANCELLATION OF MANUAL EXTRAS
2.5.- INTRODUCING EXTRAS IN STOPPED
2.6.- ADDING THE EXTRAS TO THE FARE
2.7.- PRINT A TICKET
2.8.- GOING BACK TO FOR HIRE
3.- TOTALIZERS SEQUENCE
3.1.- ACCUMULATIVE TOTALIZERS
3.2.- DAILY TOTALIZERS
4.- SPECIAL FUNCTIONS
4.1.- TO CLEAR DAILY TOTALS
4.2.- VISUALIZATION OF THE ACCUMULATIVE TOTALIZERS
4.2.1.- BLOCK 1 VISUALIZATION
4.2.2.- BLOCK 2 VISUALIZATION
4.2.3.- BLOCK 3 VISUALIZATION
4.3.- DATE AND TIME VISUALIZATION
4.4.- DISPLAYS TEST
4.5.- LAST SERVICE DATA VISUALIZATION
1.- SWITCHING THE TAXIMETER ON.
Taximeter in OFF.
Taximeter in ON pressing the O key. If there is a pasword programmed, the second point in the
status display, will blink waiting the introduction of the code.
If no passowrd is required or once the correct code is introduced the taximeter goes to ON.
Taximeter in OFF pressing the O key.
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
2.- OPERATING THE TAXIMETER FOR A SERVICE.
2.1.- ENGAGING A FARE.
Press 1 , 2 , 3 or 4 key to start the right tariff.
For tariffs 5, 6, 7 and 8, whilst key + is pressed, press key 1 , 2 , 3 or 4 .
2.2.- INTRODUCING EXTRAS IN HIRED
By pressing key the text HIRED will start flashing.
Add the extras needed by pressing keys 1 , 2 , 3 o 4.
To leave the extras sequence press key .
2.3.- STOPPED POSITION
To go to stopped position press key .
2.4.- CANCELLATION OF MANUAL EXTRAS
Whilst key is pressed, press key .
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
RATE
FOR HIRE
HIRED
STOPPED
MEASURE
£ FARE P.
£ EXTRAS P.
mi
hh.mm
Loading...