Taxan KG-PS232Xh, KG-PS232X, KG-PV131X, KG-PV131S User Manual

IMPORTANT

DLP® (Digital Light Processing) and DLP® chip are registered trademarks of Texas Instruments Incorporated (U.S.A.). VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.). S-VGA is a registered trademark of Video Electronics Standards Association. Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries). Macintosh is a trademark of Apple Computer Inc. (U.S.A.).

Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies and to the product trademarks.

•

KG-PS232Xh/232X KG-PV131X/131S

DATA PROJECTOR User’s Manual

Data Projector

E-2

Important safety information

Precautions

Thank you for your purchase of this TAXAN data projector. Please read this User’s Manual to the end so that you will be able to use this product properly. After reading, keep this manual together with the Warranty in a safe place so that you may refer to it whenever you need it. Please read this User’s Manual should there be something that you need to know during operation of the projector or in case of an irregularity.

This User’s Manual covers models KG-PS232Xh/KG-PS232X, and KG-PV131X/KG-PV131S. The projection distance is the same in these models, but the screen resolution, auto focus function, and some other functions are dierent. See the table below and the “Major Specications” for details. See Pages E-90 to 93.

Model Resolution (Full Function) Auto Focus Function

KG-PS232Xh 1024 × 768 (XGA)

○

KG-PS232X 1024 × 768 (XGA)

○

KG-PV131X 1024 × 768 (XGA) —

KG-PV131S 800 × 600 (S-VGA) —

○: Function included, —: Function not included

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Type of Product:

Equipment Classification:

Models:

Projector

Class B Peripheral

KG-PV131S, KG-PV131X, KG-PS232X, KG-PS232Xh

U.S. Responsible Party: Address:

Tel. No.:

PLUS Vision Corp. of America 9610 SW Sunshine Court Suite 500 Beaverton, OR 97005 (503) 748 8700

We hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules.

DECLARATION OF CONFORMITY

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-3

Important safety information

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED KAGA COMPONENTS SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sucient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

The above cautions are given on the bottom of the product.

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED KAGA COMPONENTS SERVICE PERSONNEL.

RF Interference

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorientate or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

•

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.

Data Projector

E-4

Important safety information

Important Safeguards

These safety instructions are to ensure the long life of the unit and to prevent re and shock. Please read them carefully and heed all warnings.

Installation

For best results, use the unit in a darkened room. Place the unit on a at, level surface in a dry area away from dust and moisture. Do not place the unit in direct sunlight, near heaters or heat radiating appliances. Exposure to direct sunlight, smoke or steam can harm internal components. Handle the unit carefully. Dropping or jarring can damage internal components. Do not place heavy objects on top of the unit.

Power Supply

The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure that your power supply ts these requirements before attempting to use the unit. Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or re. Disconnect the power cable (main’s lead) from the power outlet after using the unit. Before disconnecting the power cable, make sure that the indicator of the POWER/STANDBY button lights in orange (not ashing or in blue).

Cleaning

Disconnect the power cable (main’s lead) from the unit. Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction. Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice tool, to prevent the damage to the unit.

Lamp Replacement

Be sure to replace the lamp when the LAMP indicator comes on. If you continue to use the lamp after 2000 hours of usage, the lamp will turn o.

Fire and Shock Precautions

Ensure that there is sucient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Allow at least 10 cm (4 inches) of space between the unit and walls. Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If something should fall into the unit, immediately disconnect the power cable from the unit and have the object removed by a qualied KAGA COMPONENTS service person. Do not place any liquids on top of the unit.

Carrying around

When carrying the unit around, please use the soft case that comes with it and, to protect the lens from scratches, always shut the lens shutter. Also, do not subject the unit to strong mechanical shock.

CAUTION – HOT!

The area around the exhaust vents is hot during and immediately after image projection. To avoid burns, keep your hands away from this area. Wait until the exhaust vents area cools o before touching it.

Do not look into the lens while the unit is on. Serious damage to your eyes could result.

•

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-5

Ways of Viewing this Manual

There are ve ways to search for information in this manual.

I just want to start using the projector

“The Procedure from Projection to Turning O the Power”

➜ See Page E-21

This introduces the basic operations of this product.

I would like to know about convenient functions when projecting

“Helpful Hints” ➜ See Page E-8

This introduces convenient functions of this product.

I would like to know about operations via the remote control and the projector control panel

“Finding Information with the Remote Control and the Projector Control Panel” ➜ See Page E-10

This introduces operating information with the remote control and the projector control panel.

I would like to know about menu screen operation methods

“Finding Information from the Operations Screen” ➜ See Page E-12

This introduces operating information from the illustrations of the menu screens.

I would like to look up operating information about this product using keywords

“Finding Information with Keywords” ➜ See Page E-14

Data Projector

E-6

Table of Contents

Important safety information .......................................................................................................................................E-2

Ways of Viewing this Manual ......................................................................................................................................... E-5

Table of Contents .............................................................................................................................................................E-6

Helpful Hints

Convenient functions for the use of this product .....................................................................................................E-8

Finding Information with the Remote Control and the Projector Control Panel

Finding Information with the Remote Control ........................................................................................................E-10

Finding Information with the Projector Control Panel ..........................................................................................E-11

Finding Information from the Operations Screen ...................................................................................................E-12

Menu Screen Names and Functions .....................................................................................................................................................................................E-12

Menu Item List ....................................................................................................................................................................................................................................E-13

Finding Information with Keywords .........................................................................................................................E-14

Check before Use

Check the Accessories...................................................................................................................................................E-15

Names of the Projector Parts and their Functions ..................................................................................................E-17

Names of the Remote Control Parts and their Functions ......................................................................................E-19

Preparing the Remote Control ....................................................................................................................................E-20

Installing the Batteries (and Battery Replacement) ......................................................................................................................................................E-20

Basic Operation

The Procedure from Projection to Turning O the Power .....................................................................................E-21

Basic Operation ....................................................................................................................................................................................................................................E-21

Placement .......................................................................................................................................................................E-25

Screen Size and Projection Distance .....................................................................................................................................................................................E-25

Connecting Personal Computers and Video Equipment ......................................................................................E-26

Connections with the Personal Computer .........................................................................................................................................................................E-26

Connections with Typical Video Equipment ....................................................................................................................................................................E-28

Connections with the AUDIO Jacks ....................................................................................................................................................................................... E-30

Connections with the MONITOR OUT Connector ........................................................................................................................................................ E-31

Connections with the RS-232C Connector.........................................................................................................................................................................E-32

Turning On the Power ...................................................................................................................................................E-33

Turning On the Power for the First Time after Purchase ...........................................................................................................................................E-34

Properly Adjusting the Projected Image to the Screen .........................................................................................E-36

Adjusting the Projected Image. ................................................................................................................................................................................................E-36

Turn o the power after projection is nished ........................................................................................................E-38

Regular Operation .........................................................................................................................................................E-39

Selection of Input Signal ...............................................................................................................................................................................................................E-39

Automatic Adjustment .................................................................................................................................................................................................................... E-39

Auto Focus

KG-PS232Xh/232X only

...................................................................................................................................................................................E-40

Auto Keystone ......................................................................................................................................................................................................................................E-40

Temporarily Blanking/Muting the Video/Audio ..............................................................................................................................................................E-40

Pausing the Video ...............................................................................................................................................................................................................................E-41

Projection Mode Selection .......................................................................................................................................................................................................... E-41

Eco Mode

KG-PS232Xh/232X only

......................................................................................................................................................................................E-42

Manual Adjustment of Focus

KG-PS232Xh/232X only

...........................................................................................................................................E-42

Manual Adjustment of Keystone ..............................................................................................................................................................................................E-43

Volume ...................................................................................................................................................................................................................................................... E-43

Enlargement of the Video and Image Movement .........................................................................................................................................................E-44

Using the Menu

Menu Operation Method .............................................................................................................................................E-46

Names and Functions of the Remote Control Buttons and Projector Buttons ...........................................................................................E-46

Using Menu Operations .................................................................................................................................................................................................................E-47

List of Items Allowing Adjustment or Setting of Each Input Signal ....................................................................E-49

Simple Menu / Source ...................................................................................................................................................E-51

Auto Detect ............................................................................................................................................................................................................................................E-51

Manual selection .................................................................................................................................................................................................................................E-51

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-7

Table of Contents

Simple Menu / Settings ................................................................................................................................................E-52

Projection Mode .................................................................................................................................................................................................................................E-52

Auto Focus

KG-PS232Xh/232X only

...................................................................................................................................................................................E-53

Keystone ...................................................................................................................................................................................................................................................E-54

Auto Power O ....................................................................................................................................................................................................................................E-55

Eco Mode

KG-PS232Xh/232X only

......................................................................................................................................................................................E-56

Status Display .......................................................................................................................................................................................................................................E-56

Simple Menu / Tools .....................................................................................................................................................E-57

Blank/Mute ..............................................................................................................................................................................................................................................E-57

Still Image ...............................................................................................................................................................................................................................................E-57

Zoom ..........................................................................................................................................................................................................................................................E-58

Timer Display ........................................................................................................................................................................................................................................E-60

Select Language ..................................................................................................................................................................................................................................E-62

Advanced Menu / Image .............................................................................................................................................E-63

Brightness / Contrast / Sharpness ...........................................................................................................................................................................................E-63

Frequency Compensation ............................................................................................................................................................................................................. E-64

Phase Control .......................................................................................................................................................................................................................................E-65

Denition ................................................................................................................................................................................................................................................. E-65

Advanced Menu / View ................................................................................................................................................E-66

Select Aspect Ratio ...........................................................................................................................................................................................................................E-66

Horizontal Position / Vertical Position ...................................................................................................................................................................................E-68

Vertical Flip / Horizontal Flip .......................................................................................................................................................................................................E-68

Advanced Menu / Color ...............................................................................................................................................E-69

Custom Mode ......................................................................................................................................................................................................................................E-69

Gamma Correction ...........................................................................................................................................................................................................................E-69

Color Temperature ............................................................................................................................................................................................................................E-70

White Level ............................................................................................................................................................................................................................................E-70

White Balance .......................................................................................................................................................................................................................................E-71

Color Space ...........................................................................................................................................................................................................................................E-72

Chroma......................................................................................................................................................................................................................................................E-72

Hue ..............................................................................................................................................................................................................................................................E-73

Advanced Menu / Input ...............................................................................................................................................E-74

Advanced Menu / Admin .............................................................................................................................................E-75

Set Password ..........................................................................................................................................................................................................................................E-75

Version .......................................................................................................................................................................................................................................................E-78

Lamp Timer ............................................................................................................................................................................................................................................. E-79

Lamp Timer Reset ..............................................................................................................................................................................................................................E-80

Initialize ....................................................................................................................................................................................................................................................E-81

Startup Screen ......................................................................................................................................................................................................................................E-81

Background Color ..............................................................................................................................................................................................................................E-82

Troubleshooting

When an indicator is lit or ashing ............................................................................................................................E-83

At a time such as this… ...............................................................................................................................................E-84

Maintenance

Cleaning ..........................................................................................................................................................................E-86

Replacing the Lamp Cartridge ...................................................................................................................................E-87

Major Specications

Specications List ..........................................................................................................................................................E-90

Table of Supported Frequency ...................................................................................................................................E-94

Cabinet Dimensions ......................................................................................................................................................E-95

Data Projector

E-8

Helpful Hints

Convenient functions for the use of this product

I would like to use the projector in a simple manner.

This product is equipped with an auto focus function and an auto keystone correction function. (Only the KG-PS232Xh/232X have the auto focus function.) When shipped from the factory, both of these functions are ON. When using this product, just press the POWER/STANDBY button and set the image size with the zoom ring to allow the image to be projected simply. See “Basic Operation” for details. See Page E-21.

I would like to project a clear image in conjunction with the projection location. (Example: I would like to project onto a blackboard, etc.)

A projection mode to suit the purpose can be selected with Projection

Mode under Simple Menu. For example, by selecting the Blackboard

mode a color adjustment that suits blackboards will be made automatically, allowing a clear image to be projected without making detailed settings. Other modes include Graphics and Presentation modes. See “Projection Mode Selection” for information about operation from the remote control. See Page E-41. See “Projection Mode” for information about operation from the menu. See Page E-52.

I would like to stop the projection temporarily.

The projection can be stopped temporarily during a presentation or class. By using Still Image (FREEZE), or Blank/Mute (BLANK) the projection can be paused, or the video can be made blank temporarily. See “Temporarily Blanking/Muting the Video/Audio”, or “Pausing the Video” for information about operation from the remote control. See Pages E-40 and 41. See “Blank/Mute” or “Still Image” for information about operation from the menu. See Page E-57.

What is the automatic keystone correction function?

When the projector is tilted up or down when projecting, the picture will appear distorted.

There are two types of keystone distortion, in the horizontal or vertical direction. This projector has a function that manually o r automatically corrects the distortion in the vertical direct ion.

See “Auto Keystone,” and “Keystone” for details. See Pages E-53 and 54.

Technical Point

What is the projection mode?

This projector is already equipped with projection modes that suit the application. This permits an immediate color adjustment to suit the purpose without p erforming detailed adjustments such as Gamma Correction, Color Tem-

perature, or White Level.

Technical Point

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-9

Helpful Hints

Convenient functions for the use of this product

I would like the lamp to have a longer life.

The life of the lamp can be maintained longer by using the Eco Mode to limit the power consumption of the projector.

KG-PS232Xh/232X only

See “Eco Mode” for information about operation from the remote control. See Page E-42. See “Eco Mode” for information about operation from the menu. See Page E-56.

I would like to put away the projector right after using it.

The projector is equipped with a Quick-o function. After turning o the power, the fan will continue to turn to cool the lamp even when the power cable has been disconnected. See “The Procedure from Projection to Turning O the Power” for details about the Quick-o function. See Page E-24.

Theft and mischief are concerns.

This projector is equipped with security lock functions that allow it to be used more safely including a theft-prevention lock compatible with the Kensington MicroSaver® security system, and a password setting See “Names of the Projector Parts and their Functions” for details about the theft-prevention lock. See Page E-18. See “Set Password” for information about setting the password. See Page E-

75.

What is a password setting?

This projector is equipped with a function that can restrict the star t-up of the projector by setting a password to avoid mischief and una uthorized use.

When a password has been set, upon starting the projector a password entry screen will be displayed. Use of the projector will not be poss ible unless the password is entered.

Technical Point

What is the Quick-o function?

The projector is equip ped with a Quick-o function. Even when the power cable is unplugged soon after turning o the power, the internal power supply will power the rotation of the cooli ng fan and cool the lamp allowing immediate removal.

Technical Point

Data Projector

E-10

FOCUS button

This button operates the focus manually.

KG-PS232Xh/232X only

See Page E-42.

KEYSTONE buttons

These buttons operate the keystone correction manually. See Page E-43.

D-ZOOM buttons

These buttons adjust the digital zoom. See Page E-44.

BLANK button

This button temporarily blanks the video and mutes the audio. See Page E-40.

FREEZE button

This button pauses the video. See Page E-41.

Finding Information with the Remote Control and the Projector Control Panel

Finding Information with the Remote Control

AUTO button

This automatically adjusts the video. (Usually, the video is adjusted automatically at the time of signal selection.) See Page E-39. *Only the RGB signal is adjustable.

MENU button

This button selects the menu display. See Page E-47.

Cursor buttons

These buttons perform the menu operations.

Infrared transmitter

POWER/STANDBY button

This button is used to switch on the power and set the projector to the STANDBY mode. See Page E-34.

SOURCE button

This button selects the input source. See Page E-39.

ENTER button

This button is used to execute menu operations, etc.

AUTO FOCUS button

This button adjusts the focus automatically.

KG-PS232Xh/232X only

See Page E-40.

AUTO KEYSTONE button

This button corrects the keystone distortion automatically. See Page E-40.

VOLUME buttons

These buttons perform the volume adjustment. See Page E-43.

ECO button

This button switches to the Eco mode.

KG-PS232Xh/232X only

See Page E-42.

COLOR MODE button

This button displays the projection mode menu. See Page E-41.

Technical Point

What is BLANK?

It is a function that temporarily ma kes the screen go blank during video projection. This is convenient when you would like to temporarily blank the video when projecting to a white board, etc.

See “Te mporarily Blanking/Muting the Video/Audio” for de tails. See Page E-40.

What is FREEZE?

It is a function that temporarily stops the projected v ideo. This is a convenient function that allows you to temporarily stop the video and look for a document should you wish to nd another doc ument when projecting a document with the personal compu ter.

See “Pausing the Video” for details. See Page E-41.

What is COLOR MODE?

It is a function that automatically adjusts optimum color tone in conjunction with the projection circumstances. For example, when projecti ng to a blackboard, selecting the

Blackboard mode w ill automatically set th e optimum

color adjustment to a blackboard. See “Projection Mode Selection” for details. See Page E-41.

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-11

Cursor buttons

These buttons perform the menu operations. (They are allocated to other functions when the menu screen is not being displayed.)

MENU button

This button selects the menu display. See Page E-47.

SOURCE button

This button displays the input source screen. See Page E-39.

ENTER button

This button is used to execute menu operations, etc.

Finding Information with the Remote Control and the Projector Control Panel

Finding Information with the Projector Control Panel

LAMP indicator

This is an indicator that indicates faults related to the lamp. See Page E-83.

HEAT indicator

This is an indicator that indicates faults related to the temperature of the projector. See Page E-83.

POWER/STANDBY button

This button is used to switch on the power and set the projector to the STANDBY mode. See Page E-34. The power supply symbol of the POWER/STANDBY button serves as an indicator that indicates the on/o status of the Eco mode, the temperature, and lamp faults. Eco Mode: See Pages E-42 and E-56. Indications of the indicator: See Page E-83.

KEYSTONE buttons

These buttons operate the keystone correction manually. See Page E-43.

AUTO FOCUS button

This button adjusts the focus automatically.

KG-PS232Xh/232X only

See Page E-40.

AUTO button

This automatically adjusts the video. (Usually, the video is adjusted automatically at the time of signal selection.) See Page E-39. * Only the RGB signal is adjustable.

Technical Point

What is the menu display?

The menus of this projector include the two types of Simple Menu and Advanced Menu.

Simple Menu includes a collection o f frequently used functions. I ncluded are On/O switch-

ing of Auto Keystone and Auto Focus, Projec tion Mode and other items. On the contrary, the Advanced Menu includes i nfrequently used settings such as ne adjustments of t he image and Set Password, e tc. See “Using the Menu” for details. See Page E-46.

What is Keystone Distortion?

Keystone distorti on is distortion of the projected image that occurs when the projector is tilted vertically or h orizontally with respect to the screen. There are two t ypes of keystone distor tion, in the horizontal direction when the projector is slanted to the left or right, and in the verti cal direction when the projector is tilted up or down. This projector can manua lly or automatically correct the distor tion in the vertical directio n. See “Auto Keystone”, and “Keystone” for details. Se e Pa ges E-53 and 54.

BLANK button

This button temporarily blanks the video and mutes the audio.

KG-PV131X/131S only

See Page E-40.

Data Projector

E-12

Finding Information with the Remote Control and the Projector Control Panel

Finding Information from the Operations Screen

This section describes menu viewing and operation. Please see the various explanatory pages about menu functions and adjustment/setting methods. To use the remote control, direct it towards the remote control infrared sensor of the projector and operate it.

Menu Screen Names and Functions

This projector has two types of menu, a Simple Menu that enables operation of basic functions, and an Advanced Menu that enables detailed settings such as image settings, etc. Since the operation method is the same for both types, the Simple Menu will be used here to describe the names and functions of the menu screen.

Menu Name

This is the title of the menu. The color of the selected menu will change.

Item Name

This is the name of the adjustment or setting. The (blue) cursor will move to the selected item.

Adjustment Bar and Settings Contents

The increases and decreases in bar length express the adjustment condition. The set contents are displayed in characters.

Help

A Help explanation related to the selected menu/item is displayed.

With respect to the Simple and Advanced screens,

Simple Menu has a light gray background color. Select-

ing Show Advanced will change the display to the

Advanced Menu.

Advanced Menu

In the Advanced Menu the menu background color changes from light gray to deep gray.

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-13

Finding Information with the Remote Control and the Projector Control Panel

Finding Information from the Operations Screen

Menu Item List

Advanced Menu

Menu Name Item Name Page

Image Brightness E-63

Contrast E-63

Sharpness E-63

Frequency Compensation E-64

Phase Control E-65

Denition E-65

View Select Aspect Ratio E-66

Horizontal Position E-68

Vertical Position E-68

Vertical Flip E-68

Horizontal Flip E-68

Color Custom Mode E-69

Gamma Correction E-69

Color Temperature E-70

White Level E-70

White Balance E-71

Color Space E-72

Chroma E-72

Hue E-73

Input Computer1 E-74

Computer2 E-74

Video E-74

S-Video E-74

Admin Set Password E-75

Version E-78

Lamp Timer E-79

Lamp Timer Reset E-80

Initialize E-81

Startup Screen E-81

Background Color E-82

Simple Menu

Menu Name Item Name Page

Source Auto Detect E-51

Manual selection Computer1 E-51

Computer2 E-51

Video E-51

S-Video E-51

Settings Projection Mode E-52

Auto Focus

E-53

Auto Keystone E-53

Keystone E-54

Auto Power O E-55

Eco Mode

E-56

Status Display E-56

Tools Blank/Mute E-57

Still Image E-57

Zoom E-58

Timer Display E-60

Volume E-61

Select language E-62

Data Projector

E-14

Finding Information with the Remote Control and the Projector Control Panel

Finding Information with Keywords

Keyword Page

Advanced Menu E-50

Aspect Ratio E-66

AUTO E-39

AUTO FOCUS E-40

Auto Focus function E-40, 53

AUTO KEYSTONE E-40

Auto Keystone (Auto keystone correction) E-40, 53

Auto Power O E-55

Background Color E-82

BLANK E-40

Blanking of the video E-41, 57

Blanking/Muting of the video/audio E-40, 57

Blurred Screen E-37

Ceiling suspension setting E-68

Chroma E-72

COLOR MODE E-41

Color Space E-72

Color Temperature E-70

Computer 1/2 E-51, 74

Contrast E-63

Digital Zoom E-44, 58

D-ZOOM E-44

ECO E-42

Eco Mode E-42, 56

Flashing indicator E-83

Focus E-37, 42

FOCUS E-42

FREEZE E-41

Frequency E-64, 94

Gamma E-69

HEAT E-83

Hue E-73

Keyword Page

Initial Setting E-34

Initialize E-81

Input source E-39, 51

KEYSTONE E-43

Keystone (Keystone correction) E-43, 54

Keystone distortion E-40, 43, 53, 54

LAMP E-83

Lamp replacement E-87

Language E-62

MENU E-47

No signal E-27

Notebook computer external output signal E-27

Phase E-65

POWER/STANDBY E-10, 11, 22

Projection Mode E-41, 52

Quick-o function E-24

Rear Projection E-68

RS-232C connector E-32

Sharpness E-63

Simple Menu E-49

Source E-39, 51

SOURCE E-39

Standby E-33

Startup Screen E-81

Status Display E-56

Timer E-60

Video/S-Video E-51, 74

Volume E-43, 61

VOLUME E-43

White Balance E-71

White Level E-70

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-15

Check before Use

Check the Accessories

Remove the projector and the accessories from the box and check that the following items are included. *The supplied power cable is a dedicated product for this projector. Never use it with another product.

Remote control (including two AA batteries) [1]

This remote control is used for projector operation. See Page E-19.

RGB signal cable (Mini D-Sub 15-pin, 2 m / 6.6 feet) [1]

This is used for making connections with a personal computer. See “Connections with a Personal Computer” for connection information. See Page E-26.

Ferrite core [3]

These ferrite cores are attached to the two power cables and either one of the video cable or S-video cable. See “Attaching the Ferrite Core” for details. See Pages E-28 and 33.

Power cable (1.8 m / 5.9 feet) [1]

This power cable supplies power to the unit. See “Turning On the Power” for connection information. See Page E-33.

What is a ferrite core?

These are accessories that are used to reduce the radiated noise from the interface cables of digital equipment and other devices. When a high frequency current that is the source of nois e ows in a cable, it will generate a magnetic eld a nd noise will be emitted. The ferrite core absorbs this and conver ts it to heat which is radiated. Attaching a ferrite core will reduce the deterioration of the p icture.

Technical Point

“WARNING”

Handling the cables supplied with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Data Projector

E-16

Check before Use

Check the Accessories

User’s manual (CD-ROM edition) [1]

Startup Guide [1] Safety and Support Service Guide

[1]

Security Sheet [1] Security Label [1]

Soft Case [1]

This case will hold the projector, the accessories, and the user’s manual.

Item Insertion

Close the lens shutter of the projector and place the projector in the case with the lens facing upward. Place the accessories in the storage pocket.

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-17

Check before Use

Names of the Projector Parts and their Functions

KG-PS232Xh/232X Projector control panel

See Page E-11

POWER/STANDBY button

See Page E-33

Ventilation slots

Exhaust vents

Lens

Lens shutter

This shutter protects the lens. Closing the shutter during projection will automatically activate Blanking/Muting of the video/audio. See Page E-33.

Rear adjusters

Adjust the projection angle. See Page E-36.

Focus ring

Adjusts the focus of the screen picture. See Page E-37.

Zoom ring

Adjusts the size of the screen picture. See Page E-36

Remote control sensor

Front adjuster

Adjusts the projection angle. See Page E-36.

KG-PV131X/131S

Lamp cover

See “Replacing the Lamp Cartridge” for information about how to replace the lamp. See Page E-87.

Focus sensor

Data Projector

E-18

Check before Use

Names of the Projector Parts and their Functions

Ventilation slots

AC IN connector

See Page E-33

Built-in Security Slot

This is compatible with the MicroSaver® security system manufactured by Kensington Computer Products Group. (See below)

RS-232C connector

This connector is used for projector control. See Page E-32

COMPUTER IN connector

See Page E-26

Remote control sensor

AUDIO IN connector

See Page E-30

VIDEO IN connector

See Page E-28

S-VIDEO IN connector

See Page E-28

Built-in Security Slot

This security slot supports the MicroSaver Security System manufactured by Kensington Microware Inc.

MONITOR OUT connector

This connector is used for video output. See Page E-31

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-19

Check before Use

Names of the Remote Control Parts and their Functions

Two types of remote control are available for this product. Here, the description will be based on the remote control for model KG-PS232Xh/232X. * The remote control for model KG-PV131X/131S does not include some of the buttons. See description below for details.

Technical Point

What is BLANK?

It is a function that temporarily ma kes the screen go blank during video projection. This is convenient when you would like to temporarily blank the video when projecting to a white board, etc.

See “Te mporarily Blanking/Muting the Video/Audio” for de tails. See Page E-40.

What is FREEZE?

See “Pausing the Video” for details. See Page E-41.

What is COLOR MODE?

It is a function that automatically adjusts optimum color tone in conjunction with the projection circumstances. For example, when projecti ng to a blackboard, selecting the

Blackboard mode w ill automatically set th e optimum

color adjustment to a blackboard. See “Projection Mode Selection” for details. See Page E-41.

10. AUTO button

This automatically adjusts the video. (Usually, the video is adjusted automatically at the time of signal selection.) See Page E-39. * Only the RGB signal is adjustable.

11. MENU button

This button selects the menu display. See Page E-47.

12. Cursor buttons

These buttons perform the menu operations.

13. AUTO FOCUS button

This button adjusts the focus automatically.

KG-PS232Xh/232X only

See Page E-40.

14. AUTO KEYSTONE button

This button corrects the keystone distortion automatically. See Page E-40.

15. VOLUME buttons

These buttons perform the volume adjustment. See Page E-43.

16. ECO button

This button switches to the Eco mode.

KG-PS232Xh/232X only

See Page E-42.

17. COLOR MODE button

This button displays the projection mode menu. See Page E-41.

1. Infrared transmitter

2. POWER/STANDBY button

This button is used to switch on the power and set the projector to the STANDBY mode. See Page E-34.

3. SOURCE button

This button selects the input source. See Page E-39.

4. ENTER button

This button is used to execute menu operations, etc.

5. FOCUS button

This button operates the focus manually.

KG-PS232Xh/232X only

See Page E-42.

6. KEYSTONE buttons

These buttons operate the keystone correction manually. See Page E-43.

7. D-ZOOM buttons

These buttons adjust the digital zoom. See Page E-44.

8. BLANK button

This button temporarily blanks the video and mutes the audio. See Page E-40.

9. FREEZE button

This button pauses the video. See Page E-41.

Precautions

Do not drop the remote control or handle it inappropriately. Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry immediately. Try to avoid use in hot and/or humid locations. Please keep batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care of a doctor. Remove the battery from the remote control when it is not going to be used for a long period. Some operations (such as menu operations) are available only through the use of the remote control and attention should be given to its c areful handling.

•

Data Projector

E-20

Check before Use

Preparing the Remote Control

Installing the Batteries (and Battery Replacement)

The projector and the batteries are packaged separately. Insert the batteries in the remote control before use. When it is time to replace the batteries, do so using the same procedure.

1. Open the cover of the battery

case located on the back of the remote control.

2. Insert the batteries so that +

and − ends match the markings inside the case.

3. Close the cover of the battery

case.

Precautions

Use the same type of replacement batteries as the supplied AA batteries. There is danger of explosion if dierent battery types are used. Dispose of used batteries according to the local regulations.

•

Note

Exposure of the main unit’s remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation. To prevent operational diculties with the sensor when the projector is installed suspended from the ceiling, install the projec tor 1.5 m (4.9 feet) or further from uorescent lighting.

The remote control will not function properly when the batteries are weak.

•

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-21

Basic Operation

This section provides a simple description of the method of operation from projector setup, to video projection, and nishing up. For the detailed operational methods of the various operations, please see the respective pages with the description.

Placement

Determine the setup locations of the screen and the projector and set up the items. See “Screen Size and Projection Distance” for information about distance and placement considerations at the time of setup. See Page E-25.

Connecting Personal Computers and Video Equipment

Connect the projector and your equipment.

To make connection with the RGB connector of a personal computer, see Connections with Personal Computer on Page E-26. To make connection with the video connector (RCA jack) of video equipment, or an S-video connector, see “Connections with Typical Video Equipment” on Page E-28. To make connection with the YCbCr connector, or YPbPr connector of video equipment, see “Using YCbCr Connectors or YPbPr Connectors” on Page E-29.

•

Basic Operation

The Procedure from Projection to Turning O the Power

Note

In consideration of quality, perfection is expected, but ver y rarely black or bright dots may exist among the pixels of DLP® type projec tors. Thank you for your understanding.

Please purchase a screen separately.

•

Technical Point

What is an RGB connector?

This is a connector used for transferring video signals to a monitor or other equipment. The three colors R (red), G (green), and B (blue) are separated and trans ferred as an analog signal with this system. The display of a personal computer is expressed by the RGB color sp ace, and synthesizing the three colors pe rmits all colors to be reproduced. These conn ectors mainly use a standard called mini D-Sub 15-pin that describes their form, and control signals used for signal synchronization, as well as other si gnals, are transferred at the same time as the RGB color signal.

What is a Video Connector, an S-connector, a YCbCr Connector, and a YPbPr Connector?

Several types of connectors are used as video connectors including composite video connectors, sepa rate vide o connectors, and compone nt video connector s.

Composite video connector s are usually called pin jacks or RCA jacks, and they are mainly included on video decks, document cameras, etc.

Separate video connectors are most t ypically called S-video, and because they take the form of mini DIN 4 -pin connectors, mini DIN 4-pin may also be used to describe S-vide o.

Component video conn ectors are called color-dierence input connectors. The u sual NTSC (480i) signal connector that transfers the C color signal which is divided into the B-Y color-dierence signal Cb (Pb), and the R-Y color-dierence signal Cr (Pr) is described a s Y/Cb/Cr. Connectors that can be used for video formats above NTSC may be described as Y/Pb/Pr.

Note

A commercially-available component cable is required to make connection with equipment having YCbCr connectors such as DVD players, etc.

A commercially-available component cable is required to make connection with equipment having YPbPr connectors such as high denition video equipment, etc.

•

Data Projector

E-22

Turn On the Power

Press the POWER/STANDBY button of the remote control or the projector and turn on the power.

The indicator of the POWER/STANDBY button will change from the orange color of the standby mode to (ashing) blue. See “Turning On the Power” for details about when the power is turned on. See Page E-33.

The Video Is Projected

Language Settings and other initial settings will be displayed only when the

power is turned on for the rst time after purchase. See “Turning On the Power for the First Time after Purchase” on Page E-34. The factory default setting is for Automatic Detection be On. This will automatically project the video when an input signal is detected.

When attempting to project video from a notebook computer, and video is not projected, see “To Output the External Output Signal of a Notebook Computer” on Page E-27.

•

Basic Operation

The Procedure from Projection to Turning O the Power

The projector is e quipped with a Quick-start function. The Quick-start function is a function that projects the video a short time after pressing the P OWER/STANDBY button.

The video will be projected a little over ten seconds after pressing the POWER/STANDBY button.

Technical Point

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-23

Properly Adjusting the Projected Image to the Screen

Model KG-PS232Xh/232X is equipped with an Auto Focus function. This function automatically adjusts the focus when the size of the projected image is adjusted with the zoom ring. Since model KG-PV131X/131S does not have an Auto Focus function, please adjust the size of the projected image with the zoom ring, and adjust the focus with the focus ring. See “Adjusting the Focus” on Page E-37 for details.

Adjusting Images and Video

Adjust the video to the optimal condition as required.

AUTO button: Automatically adjusts the image of the RGB signal. “Automatic Adjustment” See Page E-39.

Projection Mode: Can select a projection mode to suit the purpose.

“Projection Mode selection” See Page E-41.

Advanced Menu: Allows more detailed video settings to be made such as Image, and Color. “Advanced Menu” See Page E-63.

•

Continued on next page

Basic Operation

The Procedure from Projection to Turning O the Power

What is the projection mode?

It is a function that automatically adjusts optimum color tone in conjuncti on with the projection circumstances.

For example, when projec ting to a blackboard, selecting the Blackboard mode will automatically set the optimum color adjustment to a blackboard.

Technical Point

What is the Auto Focus function?

Model KG-PS232Xh/232X is equipped with an Auto Focus function. The Auto Focus function is a function that measures the dist ance to the screen and performs the fo cus ad justment automatically. Auto Focus uses the infrared sensor at the front of the projector to determine the screen position and adj ust the focus.

See “Auto Focus” for information abo ut the setting method. See Page E-53.

Technical Point

Data Projector

E-24

Basic Operation

The Procedure from Projection to Turning O the Power

Turn O the Power after Projection is Finished

After projection is nished, press the POWER/STANDBY button to turn o the power. This message will be displayed: Turning power o – Press "POWER/STANDBY" to proceed. (Press "MENU" to cancel.)

A press of the POWER/STANDBY button cause the screen to go blank and will enter the projector into the power o operation. When the Quick-o function is not being used, check that the POWER/STANDBY button indicator is lit in orange in the standby mode and then disconnect the power cable. When the power cable is disconnected, the indicator of the POWER/STANDBY button will go o.

Technical Point

What is the Quick-o function?

Note

After cooling the projector with the power cable connected, relighting of the lamp might become dicult.

Do not place the projector in a bag or other enclosure while the cooling fan is turning.

•

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-25

Screen Size

Designation

(Inches)

Screen Size

Width × Height

Projection Distance Height h1 Height h2

(m) (feet) (m)

Wide – Tele

(feet)

Wide – Tele

(m) (feet) (m) (feet)

31.3" 0.64 × 0.48 2.09 × 1.57 — – 1.20 — – 3.94 0.53 1.73 0.05 0.16 40" 0.81 × 0.61 2.67 × 2.00 1.33 – 1.54 4.36 – 5.05 0.67 2.20 0.06 0.20 60" 1.22 × 0.91 4.00 × 3.00 2.00 – 2.33 6.56 – 7.64 1.00 3.30 0.09 0.30 80" 1.63 × 1.22 5.33 × 4.00 2.69 – 3.12 8.83 – 10.24 1.35 4.43 0.13 0.43

100" 2.03 × 1.52 6.67 × 5.00 3.38 – 3.91 11.09 – 12.83 1.68 5.52 0.16 0.52 120" 2.44 × 1.83 8.00 × 6.00 4.06 – 4.69 13.32 – 15.39 2.02 6.62 0.19 0.62 150" 3.05 × 2.29 10.00 × 7.50 5.08 – 5.88 16.67 – 19.29 2.53 8.29 0.24 0.79 200" 4.06 × 3.05 13.33 × 10.00 6.79 – 7.85 22.28 – 25.75 3.36 11.02 0.31 1.02 250" 5.08 × 3.81 16.67 × 12.50 8.49 – 9.82 27.85 – 32.22 4.20 13.78 0.39 1.28 300" 6.10 × 4.57 20.00 × 15.00 10.20 – 11.79 33.46 – 38.68 5.04 16.54 0.47 1.54

Basic Operation

Placement

Use this information as a guide to nd out about what the screen size will be for the projected video when placing the projector. The projection distance over which focusing is adjustable is 1.20 m (3.9 feet) to 11.79 m (38.65 feet) from the projector lens surface. The projector should be placed within this range. It will be necessary to change the projection method when the projector is installed suspended from the ceiling. See “Vertical Flip / Horizontal Flip”. See Page E-68.

Screen Size and Projection Distance

•

31.3"

40"

80"

100"

120"

150"

200"

250

1.20 (3.94)

1.33–1.54 (4.36

–5.05)

2.00

–2.33

(6.56

–7.64)

2.69

–3.12 (8.8

–10.24)

3.38

–3.91 (11.09

–12.83)

4.06

–4.69 (13.32

–15.39)

5.08

–5.88 (16.67

–19.29)

6.79

–7.85 (22.28

–25.75)

8.49

–9.82 (27.85

–32.22)

10.20

–11.79 (33.46

–38.68)

300"

Height from center of lens to top edge of the projection

Height from center of lens to bottom edge of the projection

Lens surface of the main unit

Unit: m (feet)

Screen Size Designation (Inches)

There is a tolerance of ±5% due to design values. This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition (with front and rear adjusters fully withdrawn).

•

Width

Screen size

(Diagonal)

Height

Data Projector

E-26

Connections with the Personal Computer

Connecting the projector with a personal computer permits the video of the personal computer to be projected to a large sized screen at meetings, lectures, and on other occasions.

Please check the following before making connections with the personal computer.

An appropriate resolution for the KG-PV131S is 800 × 600 dots (S-VGA), and the maximum displayable resolution is 1024 × 768 dots (XGA). An appropriate resolution for the KG-PS232Xh/232X and KG-PV131X is 1024 × 768 dots (XGA), and the maximum displayable resolution is 1280 × 1024 dots (S-XGA).

Please change to a displayable resolution at the PC side when the aforementioned maximum displayable resolution is exceeded. See “Table of Supported Frequency” for details. See Page E-94. The screen resolution setting method of the personal computer will dier depending on the specic model. Please read the personal computer instruction manual or the on-line help information, or contact the manufacturer of your personal computer.

Connect the COMPUTER IN 1/2 connector of the projector with the video output connector of the personal computer using the supplied RGB signal cable or a commercially-available one.

When making connections, align the orientation of the connectors and insert them. Then, turn the knobs and secure to the connector of the projector. The factory default input signal setting is set to Auto; however, if there is no projection, change the setting of the input signal to Computer with Advanced

Menu ▶ Input ▶ Computer 1/2. See “Input” for details about the setting of

input signals. See Page E-74.

•

Monito r Output

Personal computer

RGB signal cable (Supplied item)

Monito r Output

RGB signal cable

(Commercially-available)

Personal computer

Basic Operation

Connecting Personal Computers and Video Equipment

Note

Use of a cable longer than the supplied RGB cable or extension of the cable might result in the generation of noise or deterioration of the image. When a long cable is used, we recommend the use of a noise canceller or other devices. Contact an installer or other professional for details.

Setting the output frequency of the personal computer to 60 Hz will result in the display of the clearest video.

•

Technical Point

What is an RGB connector?

What are supported frequencies?

Supported frequencies is a term that indicates the breadth of the scanning frequencies that this projector supports. The scanning frequencies express the speed when the display is drawing the screen. The number of lines that can be drawn in 1 second are called the horizontal scanning frequency, and the number of times the screen is overwritten in 1 second is called the vertical scanning frequency. The higher th e scanning frequenc y, the higher the resolution or the greater the number of simultaneously expressed colors can will be possible, and a display having little icker ca n be produced. As an exampl e, a display having a vertical scanning frequency of 70 Hz can draw the screen 70 times i n 1 second.

Technical Point

This projector is equipped with two COMPUTER IN connectors. When two personal compu ters are used in meetings or classes, they can bot h be connec ted to the projector at the same time.

One RGB cable is supplied with this projector. Whe n the projector is used with two computers, please purchase an additional commercially- available RGB cable.

When two personal computers are connected, the video that is detected rst will be projected. To switch the video, press the SOU RCE button of the projector or the remote control and switch the input.

•

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-27

Basic Operation

Connecting Personal Computers and Video Equipment

To Output the External Output Signal of a Notebook Computer

When connecting a notebook computer, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook computer startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure.

1. Check whether a signal is being sent from the notebook computer to this

projector.

An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external output signal is being output.

2. When a signal is not being output from the notebook computer, take

steps to output an external output signal.

The output method of the external output signal will dier depending on the personal computer manufacturer. See the table below for details.

Manufacturer Key

ACER Fn + F5

DELL Fn + F8

EPSON Fn + F8

FUJITSU Fn + F10

Hewlett-Packard Fn + F4

IBM Fn + F7

Lenovo Fn + F7

NEC Fn + F3

Panasonic Fn + F3

SHARP Fn + F5

SONY Fn + F7

SOTEC Fn + F3–F5

TOSHIBA Fn + F5

Note: The content of the table is current as of December, 2007.

When the liquid crystal screen of the notebook computer and the projector image are displayed at the same time, the projected image might not be correct even though the liquid crystal screen displays the correct image. Should this occur, stop the simultaneous display of the notebook computer and try the mode with external output only. Try an operation such as that described in step 2 at the left, and try closing the liquid crystal panel which might result in external output only.

Note

Data Projector

E-28

Basic Operation

Connecting Personal Computers and Video Equipment

Connections with Typical Video Equipment

This product can project the video from a wide variety of video equipment including video decks, television, and video cameras, etc.

Using RCA Jacks

Connect to the projector’s VIDEO IN connector using a commercially-available video cable. The factory default input setting of the VIDEO IN connector is set to Auto; however, if there is no projection, change the input setting with Advanced Menu ▶

Input ▶ Video. See “Input” for details. See Page E-74.

Using S-Video Connectors

Connect to the projector’s S-VIDEO IN connector using a commercially-available S-video cable. The factory default input setting of the S-VIDEO IN connector is set to Auto; however, if there is no projection, change the input setting with Advanced

Menu ▶ Input ▶ S-Video. See “Input” for details. See Page E-74.

•

Attaching the Ferrite Core

Place side-by-side the commercially-available video cable and the S-video cable as illustrated in the diagram and attach the supplied ferrite core.

VIDEO S-VIDEO

Video cable (Commer-

cially-available)

S-Video cable

(Commercially-available)

Ferrite core (Supplied item)

Ferrite core

Cable

Video decks, DVD players, document cameras, etc.

Technical Point

What is a RCA Connector, and a S-Connector?

Several types of connectors are used as video connectors including composite video connectors, sepa rate vide o connectors, and compone nt video connector s.

Composite video connector s are usually called pin jacks or RCA jacks, and they are mainly included on video decks, document cameras, etc.

Separate video connectors are most t ypically called S-video, and because they take the form of mini DIN 4 -pin connectors, mini DIN 4-pin may also be used to describe S-vide o.

Technical Point

What is a ferrite core?

These are accessories that are used to reduce the radiated noise from the interface cables of digital equ ipment and other devices. When a high frequency current that is the source of n oise ows in a cable, it will generate a magnetic eld and noise will be emitted. The ferrite core absorbs this and converts it to heat which is radiated. Attaching a ferrite core will reduce the deterioration of the pictu re.

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual

E-29

Basic Operation

Connecting Personal Computers and Video Equipment

Using YCbCr Connectors or YPbPr Connectors

Use a commercially-available conversion cable to connect with the COMPUTER IN 1/2 connector of the projector. The factory default input setting of the COMPUTER IN 1/2 connector is set to

Auto; however, if there is no projection, change the input setting with Advanced Menu ▶ Input ▶ Computer 1/2. See “Input” for details. See Page E-74.

When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or another color, change the setting under Advanced Menu ▶ Color ▶ Color Space. See “Color Space” for details. See Page E-72.

•

Component

Y Cb Cr

Y Pb Pr

Green

Blue

Red

Green

Blue

Red

Component cable (Commercially-available) (Mini

D-Sub 15-pin/RCA 3-pin)

Component cable (Commercially-available) (Mini

D-Sub 15-pin/RCA 3-pin)

What is YCbCr Connector, and a YPbPr Connector?

Several types of connectors are used as video connectors including composite video connectors, sepa rate vide o connectors, and compone nt video connector s.

Composite video connector s are usually called pin jacks or RCA jacks, and they are mainly included on video decks, document cameras, etc.

Separate video connectors are most t ypically called S-video, and because they take the form of mini DIN 4 -pin connectors, mini DIN 4-pin may also be used to describe S-vide o.

Technical Point

+ 67 hidden pages

Taxan KG-PS232Xh, KG-PS232X, KG-PV131X, KG-PV131S User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual