Tatung V32ECBB, V32ELBB, V32EMBB Schematic

Service Manual
V32ECBB/V32ELBB/V32EMBB
LCD Multi-Media Display
(PAL/SECAM system)
Table of Contents
1. Safety and Precautions…………………………………………………………….1
2. Specifications……………………………………………………………………….3
2.1 Specification for V32ECBB…………………………………………………….3
2.2 Specification for V32ELBB…………………………………………………….4
2.3 Specification for V32EMBB……………………………………………………5
2.4 PC I/P Preset Timing Table………………………………… …………………6
3. Connection & Applications…………………………………………………………..7
4. Controls Location…………………………………………………………………….9
5. Remote Control………………………………………………… …………………….11
6. Disassembly Instructions…………………………………………………………….14
7. Block Diagram…………………… …… ……………………………………………..18
8. T r oubleshooting………………………………………………………………………19
8.1 Symptom Codes (for Call center use)………………………………………….19
8.2 Flow Chart (for Repair center use)…………………………………………….23
9. Electronic Circu i t Description………………………………………………………. 25
10. Circuit Diagram…… ……………………………………………………………… .. 30
10.1 Main Board……………………………………………………………………...30
10.2 Key, LED&IR Board …………………………………………………………..39
10.3 Tuner & Video Board…………………………………………………………..40
10.4 Connecting Board………………………………………………… …… ………41
10.5 Power Board…………………………………………………………………….42
11. PCB Layout……………………………………………………………………………43
11.1 Main Board PCB………………………………… …………………………….43
11.2 Key, LED&IR, Connecting Board PCB………………………………………45
11.3 Tuner & Video Board PCB……………………………………………………46
11.4 Connecting Board PCB………………………………………………………...47
11.5 Power Board PCB………………………………………………………………48
12. Spare Parts List……………………………………………………………………….49
13. Mechanical Disassembly………………………………… …………………………...51
14. Firmware Program Update Steps……………………………………………………53
1. Safety and Precautions
CAUTION
* The service of this LCD TV must be carried out by qualified persons only. * Do not change any module unless the set is switched off.
CLEANINGAlways disconnect unit from mains supply before attempting to clean it.
Use soft cloth moistened with soapy water, wipe gently. Do not use solvents of abrasive materials.
SOME DO’S AND DONT’S ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet European safety standards but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
read the operating instructions before you attempt to use the equipment.
Do Do ensure that all electrical connections (Including the mains plug, extension leads
and interconnections between pieces of equipment) are properly made in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.
Do use only the Power Cord and Power Supply (option) provided.
consult your dealer if you are ever in doubt of the installation, operating, or safety of
Do
your equipment.
Don’t exert pressure on the LCD TV . This could break the panel . Don’t continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way. Switch off, withdraw the mains plug and consult your dealer.
Don’t remove any fixed covers as this may expose dangerous voltages. Don’t leave equipment switched on when it is unattended unless it is specifically stated
that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that everyone knows how to do this. Special arrangements may need to be made for infirm or handicapped people.
1
Don’t listen to headphones at high volume, as such use can permanently damage your
hearing.
Don’t obstruct the ventilation of the equipment, for example, with curtains or soft
furnishings. Overheating will cause damage and shorten the life of the equipment.
Don’t allow electrical equipment to be exposed to rain or moisture.
Above all
Never let anyone push anything into holes, slots or any other opening as this could
result in a fatal electric shock.
Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry!
WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
2
2.1 V32ECBB
2. Specifications
ITEMS SPECIFICATION
Screen Size 31.51” TFT-LCD Panel (CPT)
Aspect Ratio 16:9
Resolution 1366 x 768 (WXGA)
Display Area (opening) H x V 697.68 mm x 392.25 mm
Panel
TV Function
Video
Input
Digital Input
PC Input (analog)
Audio Input
Video Output
Audio Output
Feature
Power Dimension W x H x D 964.8mm * 582.4mm * 279.8mm
Weight
(net)
Pixel Pitch 0.511 mm x 0.511 mm
Display colors 16,777,216 colors
Contrast Ratio 800 : 1 (typ.)
Brightness (center) 550 cd / m
Viewing Angle (CR>10) 176o Hor. / 176o Ve r. ( t y p . )
Response Time (GTG) 10 ms (typ.)
Broadcasting System PAL / SECAM
Receiving Channel B / G, D / K, I and L / L’ (Multi-Europe)
Sound System NICAM / A2 (IGR)
Data Broadcasting Teletext 255 pages (FLOF /TOP) , Auto Program Searching (APS)
Video Color System PAL / SECAM / NTSC
AV1 (scart) 21-pin Scart (RGB / CVBS / SVHS) x 2
AV2 (composite)
AV3 (component) Y Pb Pr (720P / 1080i , HDTV ready) x 1
HDCP / DVI HDCP 1.1 / DVI 1.0
Signal Connection D-Sub 15 pin x 1
PnP compatibility DDC / 2B
Scanning Frequency f
HDTV Ready (via D-sub 15 pin) 720p, 1080i
Audio 1 Scart (build-in) x 2
Audio 2
Audio 3 Component x 1
Audio 4 PC
SCART 1 TV x 1
SCART 2 TV / CVBS (scart 1) x 1
Composite (RCA jack) TV
Speaker ( build-in) 10W + 10W (rms) @ THD < 10% ( 7W + 7W @ THD < 1% )
Line Out Left / Right / Subwoofer
OSD Language
Function Keys Power , Source , Menu , Up/Down(Channel) , +/-(Volume) , Aspect .
Video Performance
Audio Performance Equalizer, Subwoofer, Auto Volume Control (AVC),
Other Control Sleep Timer, Auto Power Off.
Power Supply AC 100V ~ 240V , 50 / 60Hz
Power Consumption < 180 W
Without Accessories 22.2kg
Composite (RCA jack) x 1
S-Video
Composite x 1
S - Video
English, French , German , Spanish , Italian ,
Finnish , Swedish, Dutch, Demark, Norway
Picture in Picture (PIP) , Comb-filter , 3D De-interlace , Canal Plus ,
Tele text , Aspect Ratio Control (ARC) , Auto Picture Control(APC) ,
Video Enhance , Noise Reduction , Picture by Picture (PBP) .
2
(typ.)
31.5 ~ 60KHz / f
H =
= 56 ~ 75Hz
V
x 1
x 1
x 1
x 1
x 1
3
2.2 V32ELBB
ITEMS SPECIFICATION
Screen Size 31.51” TFT-LCD Panel (LG)
Aspect Ratio 16:9
Resolution 1366 x 768 (WXGA)
Display Area (opening) H x V 697.68 mm x 392.25 mm
Panel
TV Function
Video Input
Digital Input
PC Input (analog)
Audio Input
Video Output
Audio Output
Feature
Power
Dimension W x H x D 964.8mm * 582.4mm * 279.8mm
Weight (net) Without Accessories 22.2kg
Pixel Pitch 0.511 mm x 0.511 mm
Display colors 16,777,216 colors
Contrast Ratio 550 : 1 (typ.)
Brightness (center) 500 cd / m
Viewing Angle (CR>10) 176o Hor. / 176o Ver. (typ.)
Response Time (BTW) 16 ms (typ.)
Broadcasting System PAL / SECAM
Receiving Channel B / G, D / K, I and L / L’ (Multi-Europe)
Sound System NICAM / A2 (IGR)
Data Broadcasting Teletext 255 pages (FLOF /TOP) , Auto Program Searching (APS)
Video Color System PAL / SECAM / NTSC
AV1 (scart) 21-pin Scart (RGB / CVBS / SVHS) x 2
AV2 (composite)
AV3 (component) Y Pb Pr (720P / 1080i , HDTV ready)
HDCP / DVI HDCP 1.1 / DVI 1.0 x 1
Signal Connection D-Sub 15 pin x 1
PnP compatibility DDC / 2B
Scanning Frequency f
HDTV Ready (via D-sub 15 pin) 720p, 1080i
Audio 1 Scart (build-in) x 2
Audio 2
Audio 3 Component x1
Audio 4 PC x 1
SCART 1 TV x 1
SCART 2 TV / CVBS (scart 1) x 1
Composite (RCA jack) TV x 1
Speaker ( build-in) 10W + 10W (rms) @ THD < 10% ( 7W + 7W @ THD < 1% )
Line Out Left / Right / Subwoofer
OSD Language
Function Keys Power, Source, Menu, Up/Down (Channel), +/-(Volume), Aspect.
Video Performance
Audio Performance Equalizer, Subwoofer, Auto Volume Control (AVC),
Other Control Sleep Timer, Auto Power Off.
Power Supply AC 100V ~ 240V , 50 / 60Hz
Power Consumption < 180 W
Composite (RCA jack) x 1
S-Video
H =
Composite x 1
S - Video x 1
English, French , German , Spanish , Italian ,
Finnish , Swedish, Dutch, Demark, Norway
Picture in Picture (PIP) , Comb-filter , 3D De-interlace , Canal Plus ,
Tele text , Aspect Ratio Control (ARC) , Auto Picture Control(APC) ,
Video Enhance , Noise Reduction , Picture by Picture (PBP) .
(typ.)
31.5 ~ 60KHz / f
= 56 ~ 75Hz
V
x 1
x 1
4
2.3 V32EMBB
ITEMS SPECIFICATION
Screen Size 32.02” TFT-LCD Panel (CMO) Aspect Ratio 16:9 Resolution 1366 x 768 (WXGA) Display Area (opening) H x V 714.96 mm x 404.6 mm
Panel
TV
Function
Video Input
Digital Input
PC Input (analog)
Audio Input
Video Output
Output
Feature
Power Dimension W x H x D 964.8mm * 582.4mm * 279.8mm
Weight
(net)
Pixel Pitch(Sub Pixel) 0.519 mm x 0.519 mm Display colors 16,777,216 colors Contrast Ratio 1000 : 1 (typ.) Brightness (center) 550 cd / m
2
(typ.) Viewing Angle (CR>20) 176o Hor. / 176o Ver. (typ.) Response Time (GTG) 8 ms (typ.)
Broadcasting System PAL / SECAM Receiving Channel B / G, D / K, I and L / L’ (Multi-Europe) Sound System NICAM / A2 (IGR) Data Broadcasting
Teletext 255 pages (FLOF /TOP), Auto Program Searching (APS)
Video Color System PAL / SECAM / NTSC AV1 (scart) 21-pin Scart (RGB / CVBS / SVHS)
AV2 (composite)
Composite (RCA jack) x 1 S-Video x 1
AV3 (component) Y Pb Pr (720P / 1080i , HDTV ready)
HDCP / DVI HDCP 1.1 / DVI 1.0 x1
Signal Connection D-Sub 15 pin x1 PnP compatibility DDC / 2B Scanning Frequency f
HDTV Ready (via D-sub 15 pin) 720p, 1080i
31.5 ~ 60KHz / f
H =
Audio 1 Scart (build-in) x 2
Audio 2
Composite x 1
S - Video x 1 Audio 3 Component Audio 4 PC
SCART 1 TV SCART 2 TV / CVBS (scart 1) Composite (RCA jack) TV
Speaker ( build-in) 10W + 10W (rms) @THD < 10% ( 7W + 7W @ THD < 1% ) Audio Line Out Left / Right / Subwoofer
OSD Language
English, French , German , Spanish , Italian , Finnish , Swedish, Dutch, Demark, Norway
Function Keys Power, Source, Menu, Up/Down (Channel), +/-(Volume), Aspect.
Picture in Picture (PIP), Comb-filter, 3D De-interlace, Canal
Video Performance
Plus, Tele text, Aspect Ratio Control (ARC), Auto Picture Control (APC), Video Enhance, Noise Reduction,
Picture-by-Picture (PBP). Audio Performance Equalizer, Subwoofer, Auto Volume Control (AVC), Other Control Sleep Timer, Auto Power Off.
Power Supply AC 100V ~ 240V , 50 / 60Hz Power Consumption < 180 W
Without Accessories 22.2kg
= 56 ~ 75Hz
V
x 1 x 1
x 1 x 1 x 1
x 2
x 1
5
2.4 PC I/P Preset Timing Table:
Analog Input
Mode
N
Name
o.
1 VGA 640 * 480 31.469 59.940 - - 25.175
2 VGA 640 * 480 37.500 75.000 - - 31.500
3 US TEXT 720 * 400 31.472 70.100 - + 28.325
4 STB 768 * 576 31.250 50.000 - - 29.750
5 SVGA 800 * 600 37.879 60.300 + + 40.000
6 SVGA 800 * 600 46.875 75.000 + + 49.500
7 XGA 1024 * 768 48.363 60.000 - - 65.000
H-Resoluti
on
V-Resoluti
on
H.Freq . (KHz)
V.Fr eq
. (Hz)
H.
Polarit
y
V.
Polarit
y
Pixel
CLK
(MHz)
8 XGA 1024 * 768 56.476 70.000 - - 75.000
9 WSGA 1280 * 768 47.708 60.000 + - 80.150
10 WXGA 1366 * 768 48.54 59.93 + + 80
* The resolution and the frequencies are displayed on the screen may not exactly same as this list.
6
3. Connection
Applications
7
NOTE:
Audio out L/R & Subwoofer out
The level of audio output cannot be changed using the volume , treble , and bass controls on your TV . These connectors should be used with an external audio amplifier that can be used to control the volume.
8
4. Controls Location
Main Power Switch
Before operating the LCD display or remote control, users must press MAIN POWER switch to ON. The MAIN POWER switch is located at the bottom-left back of the LCD display (near
by Power Inlet).
9
Function Key
10
5. Remote Control
11
Summary of Control Buttons
12
PIP Control
ON / OFF
PIP Source
SIZE
POSITION
Press to watch one of the video sources on Sub-display, whilst in PC mode. Press again to turn off the Sub-display.
Press to select the PIP window input source as :
▲▼ button : TV→ Video S-Video SCART 1 SCART 2
Press SCART 2 S.
To make the PIP window double, large, small and tiny.
Press to move the PIP window to: Top Left Top Right Bottom Right Bottom Left Repeat.
Other Function
Audio SWAP
ARC
APC
SOUND
SLEEP
SUB-PAGE/TIME
Exchange sound between main and sub source
Set the display aspect: Full→Normal→16:9 Zoom→Panoramic→Auto. For PC mode, only Regular and Full options are available. Note: not available for Panoramic under 1080i of CV mode.
Select the picture brightness & contrast to “Standard", "Movie", "Bright", „Manual“ and "clear".
Press to choose stereo, bilingqual, and monaural broadcasts.
Press to select a preset time interval for automatic power off.
Press “Sub-Page/Time“ to display the digital clock in TV mode.
13
6. Disassembly Instructions
Face down the LCD-TV:
Face down the LCD-TV on a smooth plane with a soft material to protect the panel faceplate.
A. Remove it and pull out it along the slot. B. Remove the plastic cover from the back cover.
C. Remove 4 screws from the Neck and then takes neck apart from the cover. D. Remove 2 screws and pull out it along the slot.
14
t
m
E. Remove 10 screws from the back cover. F. Remove 1 screw from the back cover and then take back cover apar
from the LCD TV.
G. Remove 3 screws from Power box.
Remove 4 screws from Main PCB Shield and Visa bracket apart fro
H.
Panel Bracket.
15
m
I. Remove 8 screws from the Main PCB and then take Main PCB apart fro
the Main Bracket.
J. Remove 6 screws from the Panel Bracket.
16
Loading...
+ 42 hidden pages