Tatung TX-3000 User Manual
TATUNG
Wireless Thin Client
TX-3000
2006/8/23 page1
Copyright
In the interest of continuing product improvement, TATUNG Co. reserves the right to change product specifications
and information in this document without notice.
TATUNG Co. makes no warranty of any kind with regard to this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. TATUNG Co. shall not be liable for any errors
contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of
this document or the examples herein.
© TATUNG Co. All rights reserved.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, adapted, or translated to another language without the prior written
consent of TATUNG Co., except as allowed under the copyright laws.
The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or
translation of those programs without prior written permission of TATUNG Co. is also prohibited.
Tatung is the registered trademark of TATUNG Co.
Microsoft, Windows XP embedded, and the Windows logo are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by
Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
All other brand names and products names used in this document are trade names, service marks, trademarks, or
registered trademarks of their respective owners.
TATUNG Co.
22 Chungshan North Road, Se ction 3
Taipei, Taiwan 104
R.O.C.
http://www.tatung.com
TATUNG Wireless Thin Client (TX-3000) User Guide
Messages
Messages are used in this document to bring important information to your attention. Different types of messages are
defined as follows:
CAUTION!: A Caution alert informs you that improper use of equipment or failure to follow safety instructions may
WARNING!: A Warning alert informs you that improper use of equipment or failure to follow safety instructions may
NOTE!: A Note is an advice that helps you make the best use of TX-3000.
Safety Instructions
You must read through all safety instructions before using TX-3000. The following information contains concepts that
you must fully understand in order to avoid property damage or body injury.
cause data loss or equipment damage.
cause bodily injury.
CAUTION!
• Always use standard battery packs supplied with the TX-3000. Other battery packs may have different
specifications and cause damages to TX-3000.
• Do not expose the battery pack to other metal objects.
• Do not use or place TX-3000 near sources of heat or expose it to direct sunlight for an extended period of time.
Store it in a cool and dry place.
• Do not push or apply force to the TFT screen.
• Do not use pens or sharp objects to write on the screen. Always use the stylus to tap or draw on the TFT screen.
WARNING!
• Using worn-out or damaged power cords may result in electric shock or fire.
• Avoid keeping a steady position when using TX-3000 for prolonged period of time. Periodic exercises and
breaks are recommended to prevent any physical discomfort.
• Always contact an authorized TATUNG service provider for assistance if any repair or adjustment is required.
TATUNG Wireless Thin Client (TX-3000) User Guide
Table of Contents
1. Overview............................................................................................................................................................ 5
2. Equipment Checklist........................................................................................................................................ 6
3. TX-3000 Specification ...................................................................................................................................... 7
4. TX-3000 Features.............................................................................................................................................. 8
4.1 Front View of TX-3000.................................................................................................................................................8
4.2 Top View of TX-3000..................................................................................................................................................10
4.3 Left View of TX-3000..................................................................................................................................................10
4.4 Right View of TX-3000...............................................................................................................................................11
4.5 Back View of TX-3000................................................................................................................................................12
5. Quick-Start Procedure ................................................................................................................................... 13
5.1 Starting TATUNG TX-3000 ........................................................................................................................................13
5.2 Booting Logo..............................................................................................................................................................15
5.3 Device Settings..........................................................................................................................................................16
5.4 LCD Panel Setting......................................................................................................................................................17
5.7 Recalibrating the Touch-Screen.................................................................................................................................20
5.8 Using the Input Method..............................................................................................................................................22
5.9 Resetting TX-3000.....................................................................................................................................................23
6. Software Applications............................................ ........................................................................................ 24
7. Restrictions................................................................................................................................. .................... 25
8. Troubleshooting ............................................................................................................................................. 26
9. Support and Service....................................................................................................................................... 28
10. Warranty................................................................................... ..................................................................... 29
11. Regulatory and Safety Notices ....................................................................................... ............................ 34
TATUNG Wireless Thin Client (TX-3000) User Guide
1. Overview...........................................................................
Welcome to choose TATUNG
building a customizable product for different vertical markets. Both first-time and experienced users can quickly
learn how to operate the TATUNG Wireless Thin Client from this guide.
®
Wireless Thin ClientTM. This wireless device is designed to support customers in
TATUNG Wireless Thin Client (TX-3000) User Guide
2. Equipment Checklist........................................................
Carefully unpack the TATUNG Wireless Thin Client from the box. Check to make sure that the following accessories
are included in the box. If you find any accessory missing or damaged, please contact TATUNG representatives
immediately.
; TX-3000
; Stylus
; AC Adapter
; AC Power Cord
; Battery Pack
Embedded Accessories
; Backup Battery
; RTC Battery
; CompactFlash Storage Card
; 802.11g WLAN Card
TATUNG Wireless Thin Client (TX-3000) User Guide
3. TX-3000 Product Specification .......................................
Items Specification
CPU AMD LX800 built-in processor
OS Microsoft Windows XP Embedded Software
Bundle software Trail Soft Keyboard
Memory DDR400 Memory
Storage Compact Flash
Display
Touch panel Yes. with Stylus Pen
Button 4 programmable button
Network 802.11b/g (Wireless) and 1Gbp/s (Wired, RJ-45)
Audio Internal speaker (Mono) x 1
I/O
Power Li-ion Battery pack, AC adapter
Main battery Type Rechargeable Li-ion battery, 2200mAh, 11.1V
Operation time About 2hrs
Charging time About 2.5hrs
Back up battery
Size, Weight 290 x 220 x 31(Min)mm, About 1.5kg
Type 10.4 inch color LCD
Resolution 1024 x 768 16bit 65536 color
10.4" Toshiba LCD resolution: 1024x768(XGA) and
transmissive display type (Default).
Life time 10,000 hrs (Lamp MTBF Life)
Internal microphone(Mono) x 1
USB USB2.0 x 2
Card slot PCMCIA Type-II (Card Bus type) x 1
I/O connector RJ-45, RS232C, VGA-Out (3 in 1 connector)
Audio Headphone terminal x 1
Microphone terminal x 1
Type Rechargeable Ni-MH battery, 40mAh, 7.2V
Backup time About 30min ( system in suspend mode)
Charging time About 12hrs
Type Rechargeable Li-battery, 100mAh, 3V RTC battery
Charging time About 50hrs
Operation Temp.:5 to 35 deg. cent., Humidity: 15 to 85% Environment
Storage Temp.:-20 to 60 deg. cent., Humidity:15 to 85%
Terminal FCC, CE,CB, CSA Certification
AC adapter Electrical appliance and Material Safety Law
OS Windows XP Embedded (Default)
TATUNG Wireless Thin Client (TX-3000) User Guide
4. TX-3000 Features .............................................................
4.1 Front View of TX-3000
1. Push function key 1, and you can execute “On Screen Keyboard”.
2. Push function key 2, and you can execute “Internet Explorer”.
3. Push function key 3, and you can execute “File Manager”.
4. Push function key 4, and you can execute “Device setting” utility, which is developed by
Tatung. It includes four functions: brightness adduction, double-tap setting, button setting,
and touch panel calibration.
5. Direction Key
6. Enter Key
7. Power LED
8. Battery Charge LED
9. RF Strength LED
10. Built-In Microphone
11. Built-In Speaker
12. TFT Touch-Screen Panel (Perform operations and input data by tapping and writing directly on
the screen)
TATUNG Wireless Thin Client (TX-3000) User Guide
TX-3000 LED indicators display useful information in the battery’s current status and charge level:
LED
Indicator
LED Color
Power LED Battery Charge LED Wireless Signal LED
Off
Green Power On Fully Charged
Amber Low Battery <=8% Charging
Red
Power Off or
Suspend Mode
Extremely Low Battery
(Auto Suspend) <=4%
Not Charging
Charge Error
(Or No Battery Installed)
Signal Strength =0
(No signal)
Signal Strength =4,5
(Excellent)
Signal Strength =2,3
(Good)
Signal Strength =1
(Very Low)
TATUNG Wireless Thin Client (TX-3000) User Guide
4.2 Top View of TX-3000
1. I/O Connector
2. Reset Button
3. USB 2.0 Port
4.3 Left View of TX-3000
1. PC Card Slot (PCMCIA Type II)
2. Headphone Jack
3. Microphone Jack
TATUNG Wireless Thin Client (TX-3000) User Guide
4.4 Right View of TX-3000
1. Power Button
(1) Pressing and holding the power button for more than 4 seconds will power off the system.
(2) Quickly tapping and releasing the power button will put the system into suspend mode. Re-tap the
power button again to resume operation.
2. Stylus
3. USB 2.0 Port
4. DC-In Jack
TATUNG Wireless Thin Client (TX-3000) User Guide
Loading...