Tatung KEN4-R Users Manual

STEREO

DIGITAL WIRELES

USER GUIDEJM-WAL35

Wi AudioLink

Professional Stereo Digital Wireless Audio Dongles

Wi-AudioLink

CONGRATULATIONS

CONGRATULATIONS!

Thank You For Choosing Jangus Music!

Congratulations on your purchase of the Wi-AudioLink Professional Stereo Digital Wireless Audio Dongles.

In this manual, you’ll nd information designed to help you understand the capability of your

Wi-AudioLink as well as step-by-step explanation on how to install and operate your

Wi-AudioLink professional stereo digital wireless audio dongles.

Wi-AudioLink

TECHNICAL SUPPORT

Getting Answers!

We want you to get the most from your new Wi-AudioLink professional stereo digital wireless audio dongles! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions.

Our customer service support staff are ready to assist you with any question you may have. Your Wi-AudioLink comes with 90 days of telephone support and one year of service coverage.

There are may ways to contact Jangus Music customer service support.

E-Mail: support@jangusmusic.com

Website: https://www.jangusmusic.com/support

Technical support: (949) 526-4877 [949-JANGUS7]

Wi-AudioLink

INTRODUCTION

Making Grate Instruments Better!

Jangus Music’s Wi-AudioLink JM-WAL35 professional stereo digital wireless audio dongles solution is the

smallest, most advanced cable replacement technology available today that ts on the palm of your hand!

This full function 2.4GHz point-to-point digital wireless audio solution provides up to 300 feet of secure,

simultaneous un-compressed stereo 48KHz/16bit CD quality wireless audio connectivity without radio frequency (RF) interference with other wireless devices ,signal loss, crackle or AC hum making it the best

wireless solution for live performances and studio recording environments.

This Patents-Pending, plug-and-play digital wireless audio solution replaces the traditional audio wire cable

and provide easy and user friendly way to connect any professional musical instrument such as Digital

Pianos, Keyboards, Guitars, Effects Pedals, Electronic Drums and other analog audio devices to remote and hard to reach equipment such as Mixers, Ampliers, Speakers, Samplers, Hard Disk Recorders, Computers

and more. Simply connect the dongle size transmitter to the audio output jacks on the musical instrument

then connect the dongle size receiver to the mixer, amplier, speaker, surround sound or computer audio

input jacks and you are done!...

Wi-AudioLink

INTRODUCTION

Meeting The Specs!

The Wi-AudioLink transmitter small and

rugged design, boasts three (3) different

power up modes to support the following instruments connections:

• Line-in (Stereo)

• Active Guitars/Mono Line-in

• Passive Guitars /Electric Acoustic

Each of the power up modes are congured to apply the appropriate input impedance and input voltage levels to best match the electrical characteristics of the instrument connected to the transmitter dongle.

MP3

Smart Phone

Flat Screen TV

Stereo System

Consumer

Effects Pedals

Mixers

Wind instruments

DJ Gear

Digital

Recorders

Computers

Professional Gear

Electric Guitars

Electric

Acoustics

Electronic

Pianos &

Keyboards

Electronic

Drums

Transmitter

(Tx)

Receiver

(Rx)

Effects Pedals

Ampliers

Mixers

Digital Recorders

In-ear Headphone Monitors

Computers

Stereo System

Wi-AudioLink

INTRODUCTION

Extreme Flexibility!

The Wi-AudioLink boasts an interchangeable 1/4” (6.35mm) TRS stereo connector jack, 1/8”

(3.5mm) stereo miniature jack, 2.5mm

subminiature jack and XLR connectors for maximum connectivity with audio devices.

The Wi-AudioLink power source exible design boasts an internal rechargeable battery for 6.5 hours of battery operations, powerful USB bus power connectivity to any USB

equipped devices and optional ON-THE-GO

AA battery power booster adapter for 19 hours

of extended battery operations.

RCA

2.5mm Mono

2.5mm Stereo

3.5mm Mono

3.5mm Stereo

6.3mm TSR Mono

6.3mm TSR Stereo

XLR Unbalanced

3.5mm Stereo

USB

Bus Power

AA Battery

Power Booster

Charger

Wi-AudioLink

INTRODUCTION

Creating Your Audio Matrix!

Jangus Music’s built-in digital wireless audio signal

patch routing feature allows users to re-rout the audio output signal from their instruments to up to eight (8) different digital wireless receivers including Jangus Music’s JM-WHM01 digital wireless headphone audio monitoring system for private listening and performance monitoring with a simple press of the

Link button located on the transmitter dongle.

No more removing the patch-bay devices, disconnecting cables, and ipping I/O circuit boards!

Mixer

Computer

Rx 5

Digital Recorder

Rx 4

Rx 6

Rx 3

Tx 1

Rx 7

Headphone

Rx 2

Effects Pedals

Rx 1

Foot Pedals

Rx 8

Wi-AudioLink

www .ja ng usm usi c.c om

PACKING LIST

What is included in the package?

Verify that you have received all of the items listed below. Please visit our web site at www.jangusmsuic.com for additional accessories.

Wi-Transmitter Wi-Receiver Universal AC Charger

(QTY 2) 1/4” Mono Male to

1/8” Stereo Male Cable

USB Y-Split Power Cable

(QTY 2) 1/4” Stereo Male to

1/8” Stereo Male Y-split Cable

User Manual

Carrying Bag

Wi Transmitter

1. Audio IN Jack

2. Power ON/OFF

3. Link / Paring

4. Power/Status LED

5. Volume UP

6. Volume Down

7. Mute

8. Sleep

9. Mic Power Mode

10. USB Charging Port

11. Belt Clip

j r o n q p l

Wi Receiver

1. Audio OUT Jack

2. Power ON/OFF

3. Link / Paring

4. Power/Status LED

5. Volume UP

6. Volume Down

7. Mute/ Play/Pause

8. Previous Track

9. Next Track

10. USB Charging Port

11. Belt Clip

Wi-AudioLink

ABOUT YOUR JM-WAL35

u | } y { z w

Wi-AudioLink

TRANSMITTER CONTROLS

Transmitter Dongle Controls and Connections

j Audio IN Jack: Provide a stereo connection for professional musical instruments, mixers

samplers and any analog devices such as MP3 players, cell phones, stereo systems, computers, home entertainment systems and more...

k Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter l Power/Status LED: The Power/Status LED display the status of six functions, ON/OFF, Battery

Charging, Paring, Microphone Power, Mute and Sleeping mode statuses F

m Volume UP: Press and hold the Volume UP for auto increments of the volume level

Press the Volume UP once for step increments of the volume level

n Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level

Press the Volume DOWN button once for step increments of the volume level

Please refer to the “Tx Button Function Matrix” section of this manual for more details

Wi-AudioLink

TRANSMITTER CONTROLS

o Mute: Press and hold the Mute button for 3 seconds stop the audio transmission

p Link/Pair: The Link button performs two functions Paring and Linking.

The Paring function allows the transmitter dongle to connect to up to 8 eight

different receivers to create you own wireless audio matrix. Press and hold the

Link button for 6 seconds until LED ash F

The Link function allows the transmitter dongle to reroute the audio signal connect from the instrument to up to 8 eight different receivers previously paired with the transmitter. Press the Link button once and the transmitter

will reroute the wireless connection to the next receiver.

Please refer to the “Tx Button Function Matrix” section of this manual for more details

Please refer to the “Paring Procedures” section of this manual for detailed instructions Please refer to the “Audio Matrix Accessories” section of this manual for options listing

Please refer to the “ “Function Matrix Table” section of this manual for additional information Please refer to the “Audio Matrix Accessories” section of this manual for options listing

Wi-AudioLink

TRANSMITTER CONTROLS

Transmitter Dongle Controls and Connections

q Sleep: The Sleep function button on the transmitter dongle is designed to prolong the

battery life operations of the transmitter dongle by 50% as well as the receiver dongle battery life 35% when not in use.

When the Sleep function on the transmitter is activated, the transmitter dongles

sends a signal to the linked receiver dongle to go into a standby mode while

switching to full sleep mode. The Sleep mode preserves the audio levels

settings on both dongles as well as on the communications link between the

transmit and the linked dongle.

Press and hold the Sleep button for 3 seconds to switch the transmitter and the receiver dongles onto standby power save mode Press and hold the Sleep button for 3 seconds to wake-up the transmitter and

the receiver dongles. F

Please refer to the “Tx Button Function Matrix” section of this manual for more details

Wi-AudioLink

TRANSMITTER CONTROLS

r Mode: The Mode multifunction button allows the user to choose between three different

power up modes to support Passive Guitars, Active Guitars or Stereo Line in connection to the transmitter dongle. To select the desired operations mode, press

the Mode button for 2 seconds and until the blue LED change its ashing sequence then release, To cycle between the three modes, simply press and hold the Mode button and the transmitter will cycle between the three modes along with the Blue LED ashing sequence to each of the modes. Release the mode button once the desired mode setting is reached

s Charging Port: The transmitter dongle utilizes mini USB connection to power up and charge the

internal batteries. The transmitter dongle can be charged using the supplied universal AC charger, via the instrument built-in USB port or the optional AA battery power booster USB adapter.

Belt Clip: The transmitter dongle can be attached to guitar strap, belt, shirts and pants pockets. The rigid small size light wight design is easy to ware without impeding your movement.

Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions .

Wi-AudioLink

RECEIVER CONTROLS

Receiver Dongle Controls and Connections

u Audio OUT Jack: Provide a stereo connection for professional Sound Systems, Monitors, Mixers,

Samplers, Computers Home Digital Theaters, Headphones and more...

v Power ON/OFF: Press and hold the Power button for 2 seconds to turn ON or OFF the transmitter w Power/Status LED: The Power/Status LED display the status of ve functions, ON/OFF, Battery,

Charging, Paring, Mute and Sleeping mode statuses F

x Volume UP: Press and hold the Volume UP for auto increments of the volume level

Press the Volume UP once for step increments of the volume level

y Volume DOWN: Press and hold the Volume DOWN for auto increments of the volume level

Press the Volume DOWN button once for step increments of the volume level

Please refer to the “Rx LED” Indicator Chart” section of this manual for more details

+ 30 hidden pages

Tatung KEN4-R Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual