Task Force TF2000, TF1600 Instructions Manual
ITEM / ARTICULO # 0008885
2000PSI ELECTRIC
PRESSURE WASHER
EQUIPO ELÉCTRICO DE
LAVADO CON AGUA A
PRESIÓN DE 2000 PSI
MODEL / MODELO # TF2000
Español p. 19
READ AND SAVE THESE INSTRUCTIONS
LEA Y GUARDE ESTAS INSTRUCCIONES
Questions, problems, missing parts? Before returning to your retailer, please contact our
customer service department at 1-866-788-5598.
¿Consultas, problemas, piezas faltantes? Antes de devolver la unidad a la tienda,
contáctese con nuestro Departamento de Servicio al Cliente llamando al 1-866-788-5598.
This product is covered by US patents and other international patents.
Este producto está protegido por patentes de los EE. UU. y otras patentes internacionales.
Derecho de autor. Todos los derechos reservados.
Copyright. All Rights Reserved.
TABLE OF CONTENTS
Safety Information ....................................................................................................................
Safety Features ....................................................................................................................
Power Supply and Electrical Info .............................................................................................
Package Contents .................................................................................................................
Assembly Instructions ........................................................................................................
Operation Instructions ........................................................................................................
Cleaning Techniques ........................................................................................................
End of Use / Storage Instructions ............................................................................................
Care and Maintenance ...........................................................................................................
Troubleshooting ...................................................................................................................
Warranty ..............................................................................................................................
3
5
6
7
8
9
14
15
16
17
18
PRODUCT SPECIFICATIONS
Max. pressure
Water flow rate
Electrical requirement
Electrical cord
High pressure hose
Minimum amp source
Pressure of inlet water
Inlet water
Soap consumption rate
* Ratings determined in accordance with PWMA. Standard PW101.
WARNING: Carefully read this operator’s manual before starting up the washer for the
2000 PSI *
1.6 GPM *
120V, 15A, 60HZ
35 ft
25 ft
15A
20 - 100 PSI
Cold tap water
10% max
first time.
CAUTION: Always store your pressure washer in a location where the temperature will
not fall below 40°F. Freeze damage is not covered by the warranty.
2
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please contact our customer service
department at 1-866-788-5598.
Safety precautions are essential when any mechanical equipment is involved. These
precautions are necessary when using, storing, and servicing mechanical equipment. Using this
equipment with the respect and caution demanded will considerably lessen the possibilities of
personal injury. If safety precautions are overlooked or ignored, personal injury or property
damage may occur. The following symbols shown below are used extensively throughout this
manual. Always heed these precautions, as they are essential when using any mechanical
equipment.
WARNING: This warning symbol identifies specific instructions or procedures which if
not correctly followed could result in personal injury or death.
CAUTION: This caution symbol identifies specific instructions or procedures which, if
not strictly observed, could result in damage to, or destruction of equipment
and/or property.
This unit was designed for specific applications. It should not be modified and/or used for any
application other than that which it was designed.
WARNING: When using this product basic precautions should always be followed,
including the following:
1. Read all the instructions before using the product.
2. To reduce the risk of injury, do not operate near children or animals.
3. Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the
controls.
4. Stay alert - watch what you are doing.
5. Do not operate the product when fatigued or under the influence of alcohol or drugs.
6. Keep operating area clear of all persons.
7. Do not overreach or stand on an unstable surface. Keep good footing and balance at all times.
8. Follow the maintenance instructions specified in the manual.
9. This product is provided with a Ground Fault Circuit Interrupter built into the power cord plug.
If replacement of the plug or cord is needed, use only identical replacement parts.
10. Do not touch plug or outlet with wet hands.
11. Avoid accidental starts. Move switch on unit to “OFF” position before connecting or
disconnecting cord to electrical outlets.
12. Water spray must never be directed towards any electric wiring or directly towards the
pressure washer machine itself or fatal electric shock may occur.
13. Never carry your pressure washer by the cord. Do not pull on the cord to disconnect from
the outlet.
14. To prevent damage, the cord should not be crushed, placed next to sharp objects or near a
heat source.
3
SAFETY INFORMATION
15. Check power cords before using. Damaged cords can reduce performance of pressure
washer or cause a fatal electric shock.
16. The narrow pin point stream is very powerful. It is not recommended for use on painted
surfaces, wood surfaces or items attached with an adhesive backing.
17. Keep operating area clear of all persons and animals.
18. Always use both hands when operating pressure washer to maintain complete control of the
wand.
19. Do not touch nozzle or water spray while operating.
20. Wear safety goggles while operating.
21. Disconnect power plug from the outlet when not in use and prior to the detaching of the
high pressure hose.
22. Never tie knots or kink the high pressure hose as damage could result.
23. Do not operate or store this product in temperatures below 40°F. Freeze damage is not
covered by the warranty.
24. Carefully observe all chemical instructions and warnings before using. Use only approved
pressure washer cleaners. Do not use bleach, chlorine, or any cleaners containing acids.
25. The pressure washer should not be used in areas where gas vapors may be present. An
electric spark could cause an explosion or fire.
26. To minimize the amount of water getting into the pressure washer, the unit should be placed
as far as possible from the cleaning site during operation.
27. To prevent accidental discharge, the spray gun should be secured by locking the trigger
when not in use.
28. To allow free air circulation, the pressure washer should NOT be covered during operation.
WARNING: Risk of injection or injury - Do not direct discharge stream at persons.
“SAVE THESE INSTRUCTIONS”
4
SAFETY FEATURES
AUTOMATIC TOTAL STOP
®
The pressure washer is equipped with a stop device which will sense when the trigger on the gun
is released. It will open the power circuit to the motor and cause the pressure washer to stop.
WARNING: If Automatic Total Stop® fails to operate, DO NOT USE THE MACHINE.
Contact our Customer Service department. Further use will damage the
machine and/or cause personal injury.
WARNING: The pressure washer is also equipped with a main power ON/OFF switch
located on the unit. It should always be moved to the OFF position when the
pressure washer is not being used to prevent possible injury or damage.
MOTOR OVERLOAD
The electric motor in this pressure washer is equipped with an overload protection device which
will automatically shut off the motor in the event the motor draws excessive current or overheats.
The device will automatically reset itself and resume normal operation after a short period of time.
GROUND-FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a Ground-Fault Circuit-Interrupter (GFCI) built into the
plug of the power supply cord. This device provides additional protection from the risk of electric
shock. Should replacement of the plug or cord become necessary, use only identical
replacement parts that include GFCI protection.
SERVICING A DOUBLE-INSULA TED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product, nor should
a means for grounding be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system, and should be done only by
qualified service personnel.Replacement parts for a double-insulated product must be
identical to the parts they replace. A double-insulated product is marked with the words
“DOUBLE-INSULATION” or “DOUBLE-INSULATED”. The symbol above may also be
marked on the product.
5
POWER SUPPLY AND ELECTRICAL INFO
GROUND-FAULT CIRCUIT INTERRUPTER PROTECTION
The pressure washer is factory-equipped with an electrical cord and a Ground Fault Circuit
Interrupter (GFCI) power plug. This cord should only be connected to an electrical outlet installed
in accordance with local safety regulations. NOTE: The power supply must be 120 V, 60 Hz and
a minimum 15 amp dedicated circuit.
A. Inspect cord before using. Do not use if cord is damaged.
B. Keep all connections dry and off the ground.
C. Do not touch plug with wet hands.
D. The pressure washer is provided with a ground fault circuit interrupter built into the power
plug. If replacement of the plug or cord is needed, use only identical replacement parts. Contact
Customer Service for proper replacement parts.
WARNING: Test GFCI before each use. DO NOT use pressure washer if test below fails.
GFCI Test Procedures:
1) Plug GFCI into power receptacle. Indicator light should illuminate.
2) Press test button. Light should turn off.
3). Press reset button for use. Indicator light should illuminate. Do not use if above test fails.
NOTE: The GFCI must be reset each time the pressure washer is connected to an electrical
outlet. Reset by simply pushing the reset button on the GFCI power plug.
Extension cords are not recommended unless they are plugged into a receptacle protected by a
ground fault circuit interrupter. Any extension cord used must be 12 AWG outdoor with maximum
length of 25 feet to prevent excessive voltage loss. Use only extension cords intended for outdoor
use. These extension cords are identified by a marking “Acceptable for use with outdoor
appliances; store indoors when not in use”.
EXTENSION CORDS
Use only extension cords that are intended for outdoor use. These extension cords are identified
by a marking “Acceptable for use with outdoor appliances; store indoors while not in use”. Use
only extension cords having an electrical rating not less than the rating of the product. Do not use
damaged extension cords. Examine extension cord before using and replace if damaged. Do not
abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and
sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the
product from the extension cord.
When using an extension cord, observe the specification below:
Cable Length - Up to 25 ft.
Wire Gauge - 12 AWG Outdoor
WARNING: To reduce the risk of electrocution, keep all connections dry and off the ground.
Do not touch plug with wet hands.
6
Loading...