Commercial Refrigeration Systems
Table of Contents
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Features & Benefits
Solid Door Uprights
Door & Drawer Uprights
Glass Door Uprights
Glass Door Refrigerators &
Ice Cream Freezers
Under Counters
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Glass Door Under Counters
Sandwich Prep Tables
Pizza Prep Tables • Chef Bases
Back Bar Coolers
Direct Draw Keg &
Horizontal Bottle Refrigerators
Sushi Cases • Ice Bins
Page 15
2
Servery & Custom Fabrication
All units carry one or more of these approvals for use in Canada and the United States
www.tarrison.com 905-825-9665
Features and Benefits for Convert-a-Temp
For Features and Benefits of other Tarrison models see the appropriate pages to follow or contact your Tarrison representative.
"Shift on the fly" technology allows Convert-a-Temp solid door upright freezer sections to be fully
convertible to refrigerator temperatures and refrigerator sections temporarily convertible to freezer
temperatures. As your refrigeration requirements change daily, your Convert-a-Temp unit will change to
meet those requirements. Simply adjust the temperature on the exterior PC board and your Convert-a-Temp
unit becomes the most unique, versatile and "must-have" piece of equipment in your kitchen.
Exterior state-of-the-art computerized thermometer and temperature control PC
board with LED display. Through this technology, Convert-a-Temp was able to create
the industry’s first fully convertible refrigeration units. Convert-a-Temp units can be
set exactly to a wide range of desired temperatures. Operators are able to pinpoint
the temperature and continually monitor the temperature at a glance. This feature will
meet the most stringent health code requirements. Temperature setting is easy, fast
and accurate.
Stainless steel interior and exterior for greater durability, construction and appearance.
Heavy-duty overall construction for high-volume, constant duty operation.
Indirect Fin-Coil Cooling. Convert-a-Temp fin coil evaporators use the
power of gravity to indirectly circulate in the box, creating low velocity
airflow and more even temperatures. Coils that blow air directly over the
product either dry out the product or create unhealthy frost. Also, the
fans are designed to stop operating when the door is open to limit the
release of cool air.
Convenient and energy-efficient half-door design. While most charge extra for optional half doors, it’s
standard on all Convert-a-Temp units. Opening only half a door will release only half of the cold air. This
feature ultimately decreases compressor run-time and increases efficiency. The doors also have recessed
handles and come with adjustable tension springs for hands-free closing.
“Auto-D” Evaporator Defrost. Convert-a-Temp units offer an automatic evaporator defrost system.
The "Auto-D" is programmed into every Convert-a-Temp PC board. If the computerized thermometer and
temperature control senses that the evaporator temperature is low enough for ice to accumulate, the unit
will automatically cycle into defrost. This system will increase the longevity of the unit and automatically
eliminate any ice generated during use.
Models CTFF4-40 and CTFF6-61B feature a Multiple Compressor System. If a compressor breaks
down, the other will continue to operate sufficiently to maintain a safe temperature. Also, instead of one compressor doing
all the work to cool your unit there are multiple compressors
sharing the workload. Each compressor works less and as a
result, extends its life. Another benefit of the Convert-a-Temp
multiple compressor system is that the decibel level is lower with two compressors working in place of one
noisy compressor.
Models CTFF6-61 and CTRR6-61 feature dual compartments. Dual compartments allow for each
compartment to have an independent temperature setting.
Heavy-duty 4" casters standard for easy mobility and installation.
Convert-a-Temp units are 76.2" high on casters to wheel through most standard doors.
All Convert-a-Temp units come standard with four adjustable epoxy coated steel wire shelves per
section. Also, an electric condensate evaporator is standard. You don't need a floor drain when you have a
Convert-a-Temp unit. Other features include 2.5" thick, foamed in place polyurethane high-density
insulation and interior lights.
Warranty: 1-year parts and labour and 5-year compressor
www.tarrison.com 905-825-9665
3
Solid Door Upright
21cu. ft.
40/55 cu. ft.
61cu. ft.
*
*20 cubic feet
Model No.
CTRR2-21 2 half 4 1/3 115 4.38 21 29.1" x 32.5" x 76.2" 290
CTFF2-21 2 half 4 1/2 115 8.12 21 29.1" x 32.5" x 76.2" 295
CTRF2-21
CTRR4-40 4 half 8 1/3 115 5.06 40 49.6" x 32.5" x 76.2" 410
CTRR4-55 4 half 8 1/3 115 5.06 55 59" x 32.5" x 76.2" 440
CTFF4-40 4 half 8 1/2x2 115 15.12 40 49.6" x 32.5" x 76.2" 480
CTFF4-55 4 half 8 1/2x2 115 15.12 55 59" x 32.5" x 76.2" 480
CTRF4-40 4 half 8 1/3+1/2 115 12.08 40 49.6" x 32.5" x 76.2" 480
CTRF4-40Q 4 half 8 1/3+1/2 115 12.08 40 49.6" x 32.5" x 76.2" 480
CTRR6-61 6 half 12 1/3
CTFF6-61 6 half 12 1/2x2 230 12.36 61 74.8" x 32.5" x 76.2" 660
CTRF6-61 6 half 12 1/3+1/2 115 12.62 61 74.8" x 32.5" x 76.2" 660
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
No. of
Doors
1/3 - FREEZER
2/3 - REFRIGERATOR
55 cu. ft. 55 cu. ft.
No. of
Shelves
4 1/3 115 8.39 20 29.1" x 32.5" x 76.2" 295
HP Volts Amps
x2 115 9.49 61 74.8" x 32.5" x 76.2" 600
Capacity
cubic feet
Dimensions
L x D x H*
Weight
lbs.
Standard Features
• 304 stainless steel interior and 430 stainless steel exterior
• Epoxy coated adjustable shelves and 304 stainless steel shelf clips
• Door locks
• Positive seal self-closing doors
• Digital thermometer, microchip installed digital monitoring system
• Four 4" diameter swivel casters for all models (front casters with
brakes) 5" overall height
• Incandescent interior lighting
• CFC free R-134a refrigerant
• Evaporator copper tube with anti-corrosive coating
• Removable front grill for easy repair and maintenance
• Interior airow backguard to ensure proper air circulation
• 1 year parts & labor warranty
• 5 year compressor warranty, part only, labor excluded
Convert-a-Temp is a full line of solid door refrigerators, freezers and dual temperature
cabinets with convertible temperature capability. Why buy a separate refrigerator and
freezer when one Convert-a-Temp unit can do the job of both at a fraction of the cost?
4
www.tarrison.com 905-825-9665
Door & Drawer Upright
Model No. Temp
TSR1D2 REF 1(half) 2 (drawers) 23 1 1/3 115 4.94 29.25" x 31.75" x 79.25" 328
TSR2D2 REF 1(full) 1(half) 2(drawers) 48 4 1/3 115 5.30 49.75" x 31.75" x 79.25" 423
TSR2D4 REF 2(half) 4(drawers) 48 2 1/3 115 5.30 49.75" x 31.75" x 79.25" 465
TSRF2D2 DUAL 1
TSWQ2D2 DUAL 1
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
Doors/
Drawers
(full) 1(half) 2(drawers) 22R + 22F 4
(full) 1(half) 2(drawers) 39R + 13F 4
Capacity
cubic feet
R
R
R
TSR1D2
Shelves
R R
TSR2D2
No. of
R
R
HP Volts Amps
1/3 REF
1/2 FZR
1/3 REF
1/3 FZR
TSR2D4
115 12.49 49.75" x 31.75" x 79.25" 503
115 12.24 59" x 31.75" x 79.25" 573
RR
RR
RR
R
R
TSRF2D2
Dimensions
L x D x H*
FR
FR
R
R
TSWQ2D2
Standard Features
Cabinet Construction
Heavy duty stainless steel, and galvanized steel finished top,
bottom and back wall of exterior. High quality 304 stainless steel
interior, ABS evaporator drain cover. Insulated with 2.5” thick
high density foamed-in-place polyurethane foam. Four 4”
diameter casters (front casters with brakes). Door and drawer
heater installed around inside cabinet frame to prevent moisture
build up.
Refrigeration System
•Self-contained condensing unit located at top of cabinet for high
performance
•Oversized condenser and evaporator coil cools to set
temperature in a minimum time period and maintains it
•Environmentally friendly CFC free R-134A and R-404A refrigerant
•Adjustable defrost cycle between every 3 to 12 hours with
400 watt heater, time initiated, and both temperature and time
terminated for fail-safe backup
•Automatic evaporator fan motor delay on defrost cycle
•Copper tube and aluminum n evaporator with
anti-corrosive coating
•Energy ecient condensate drain pan located at bottom of
cabinet constructed of anodized aluminum
•Two pressure relief ports located at exterior back wall and top
of cabinet for rapid re-entry
•Interior airow backguard to ensure proper air circulation
•Pre-wired and ready to plug to, 115V/60Hz/1Ph, NEMA 5-15P
Doors & Drawers
•430 stainless steel exterior with 304 stainless steel interior
•Insulated with 2.5” thick foamed-in-place polyurethane foam
•Rounded corners for a sleek and modern appearance
•Heavy duty adjustable torsion spring self-closing door system
•One piece snap-in magnetic door gasket for easy replacement
•Heavy duty recessed door handles that stay out of the way
•Heavy duty 304 stainless steel drawer frames and low friction
bearing slides
•Door locks
Lighting
•Safety shielded incandescent interior lighting
Shelving
•Three epoxy coated wire shelves per full door, one shelf per half door
•304 stainless steel pilasters and shelf clips
Temperature Control
•Factory preset temperature, 35° F for refrigerator and -4°F for freezers
•Setting temperature range from 33° F to 41° F for refrigerator
and -10° F to 32° F for freezers
•Easy to read digital temperature display
•Easy to control temperature by simply pushing buttons on control
•Microchip digital monitoring system provided with various functions
for monitoring and maintaining ideal temperature
Weight
lbs.
box
www.tarrison.com 905-825-9665
5
Glass Door Upright Refrigerators
TSGR1 TSGR2 • TSGWR2 TSGR3
Model
No.
TSGR1 REF 1 (swing) 23 3 1/3 115 4.47 29.25” x 31.75” x 79.25” 28.25" 311
TSGR2 REF 2 (swing) 48 6 1/2 115 7.57 49.75” x 31.75” x 79.25” 24" 434
TSGWR2 REF 2
TSGR3 REF 3 (swing) 71 9 2x1/3 115 9.49 75” x 31.75” x 79.25” 24 585
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
Temp
No. of
Doors
(swing) 55 6 1/2 115 8.35 59” x 31.75” x 79.25” 28.25" 478
Capacity
(Cu. Ft.)
No. of
Shelves
HP Volts Amps
Dimensions
L x D x H*
Door
Width
Weight
Standard Features
Cabinet Construction
Heavy duty stainless steel exterior, with galvanized steel finished
top, bottom and back wall of exterior. High quality 304 stainless
steel interior, ABS evaporator drain cover. Insulated with 2.5”
thick high density foamed-in-place polyurethane foam. Four 4”
diameter casters (front casters with brakes). Door heater installed
around inside cabinet frame to prevent moisture build up.
Refrigeration System
•Self-contained condensing unit located at top of cabinet for
high performance
•Oversized condenser and evaporator coil cools to set
temperature in a minimum time period and maintains it
•Environmentally friendly CFC free R-134A refrigerant
•Adjustable defrost cycle between every 3 to 12 hours with
400 watt heater, time initiated, and both temperature and
time terminated for fail-safe backup
•Automatic evaporator fan motor delay on defrost cycle
•Copper tube and aluminum n evaporator with
anti-corrosive coating
•Energy ecient condensate drain pan located at bottom of
cabinet constructed of anodized aluminum
•Two pressure relief ports located at exterior back wall and
top of cabinet for rapid re-entry
•Interior airow backguard to ensure proper air circulation
•Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA-5-15P
Doors
•Grey PVC door frames
•Double pane glass system with a layer of transparent thermal
insulation film in between two layers
•Heavy duty adjustable torsion spring self-closing door system
•One piece snap-in magnetic door gasket for easy replacement
•Heavy duty die cast door handles
Lighting
•Safety shielded vertical uorescent interior lighting
with on/off switch
Shelving
•Three epoxy coated wire shelves per section
•304 stainless steel pilasters and shelf clips
Temperature Control
•Factory preset temperature, 35° F
•Setting temperature range from 33° F to 41° F
•Easy to read digital temperature display
•Easy to control temperature by simply pushing buttons on control box
•Microchip digital monitoring system provided with various functions
for monitoring and maintaining ideal temperature
lbs.
6
www.tarrison.com 905-825-9665
SLIDING DOORS
Glass Door Refrigerators
TMGR33
TMGR48
TMGR69
SWINGING
DOORS
TMSGR24 TMSGR33
TMSGR48
TMSGR69
Standard Features and Benefits:
• Heavy duty white coated steel cabinet, stainless steel floor, black PVC door
frames and black coated steel front grill exterior
• Insulated with 2.5” thick high density foamed in place polyurethane foam
• Adjustable screw legs for leveling; one extra on GR69 to support middle weight
• Oversized bottom mount slide out condensing unit for easy maintenance and repair
• Four Ajustable epoxy coated wire shelves and 304 stainless steel shelf clips
• Double pane glass system with a layer of transparent thermal insulating film between two layers
• Removable self-closing sliding doors on stainless steel track for easy cleaning
• Self-closing swing doors on heavy duty adjustable torsion spring with snap-in magnetic door gasket and heavy duty handle
• Safety shielded vertical fluorescent interior lighting with on/off switch
• Evaporator copper tube with anti-corrosove coating
• CFC free R-134a refrigerant
• Condensate drain pan included
• Factory preset temperature 35° F with dial thermostat knob
Model No.
TMSGR24 1 Swing 24 4 1/3 115 4.07 28.5” x 33.5” x 79.25” 240
TMGR33 2 Sliding 33 8 1/3 115 4.16 39.5” x 30.75” x 79.25” 403
TMSGR33 2 Swing 33 8 1/3 115 4.16 39.5” x 33.5” x 79.25” 403
TMGR48 2 Sliding 48 8 1/2 115 9.00 53.25” x 30.75” x 79.25” 531
TMSGR48 2 Swing 48 8 1/2 115 9.00 53.25” x 33.5” x 79.25” 494
TMGR69 3 Sliding 69 12 1/2 115 11.00 73” x 30.75” x 79.25” 650
TMSGR69 3 Swing 69 12 1/2 115 11.00 73” x 33.5” x 79.25” 670
* Depth of swing door includes 1.5" for door handle • Sizes nominal, specifications subject to change without notice.
No. of
Doors
Type of
Doors
Capacity
(Cu. Ft.)
No. of
Shelves
HP Volts Amps
Options:
4" or 2.5" diameter casters
(5" and 3" overall height)
Dimensions
L x D x H
Weight
lbs.
Ice Cream Freezers
Standard Features and Benefits:
• Heavy duty white coated steel for cabinet interior and exterior, 304 series stainless steel
floor interior, and aluminum door frames
• High density foamed-in-place polyurethane foam insulation
• Triple pane glass door system with layer of transparent thermal insulating and heating film
• Positive seal self-closing doors with single piece magnetic door gasket design
• Heavy duty epoxy coated shelves standard
• Hot gas defrost cycle system
• Evaporator constructed of copper tubing and aluminum fins, assembly treated with
anti-corrosive coating
• Door heater installed around inside cabinet frame to prevent moisture build-up
• Illuminated signboard and interior
• Carel microchip digital control system with LED temperature display
Model No.
TMSGF17 1 Swing 17 4 3/4 115 10.5 26.38” x 30.83” x 78.35” 260
TMSGF20 1 Swing 20 4 3/4 115 10.5 29.13” x 31.61” x 78.35” 280
TMSGF32 2 Swing 32 8 1 230 7.0 40.94” x 31.61” x 78.35” 440
Sizes nominal, specifications subject to change without notice.
No. of
Doors
Type of
Doors
Capacity
(Cu. Ft.)
No. of
Shelves
HP Volts Amps
www.tarrison.com 905-825-9665
TMSGF32
Dimensions
L x D x H
Weight
lbs.
7
Solid Door Under Counter
Refrigerators, Freezers and Dual Temps
CTUR-2-48BM
Standard - Side Mount CompressorBack Mount Compressor
CTUCFF-248
CTUR-1-27BM
CTUF-1-27BM
Model No. Temp Doors
CTUR-2-36BM
CTUF-2-36BM
CTUR-2-48BM
CTUF-2-48BM
CTUR-2-60BM
CTUF-2-60BM
No. 0f
Shelves
CTUR-2-72BM
CTUF-2-72BM
Capacity
(Cu. Ft.)
HP Volts Amps
CTUCRR-136
CTUCFF-136
CTUCRR-248
CTUCFF-248
Dimensions
L x D x H*
CTUCRF-372 CTUCRF-260
Door
Width
Back Mount Compressor
CTUR-1-27BM REF 1 2 5.6 1/5 115 4.1 27.5” x 31.5” x 34.75” 26.5" 190
CTUF-1-27BM FZR 1 2 5.6 1/3 115 5.2 27.5” x 31.5” x 34.75” 26.5" 180
CTUR-2-36BM REF 2 4 7.5 1/5 115 4.4 35.5” x 31.5” x 34.75” 17" 220
CTUF-2-36BM FZR 2 4 7.5 1/2 115 6.4 35.5” x 31.5” x 34.75” 17" 220
CTUR-2-48BM REF 2 4 10.3 1/5 115 4.4 47.5” x 31.5” x 34.75” 22.75" 290
CTUF-2-48BM FZR 2 4 10.3 1/2 115 6.4 47.5” x 31.5” x 34.75” 22.75" 290
CTUR-2-60BM REF 2 4 15 1/4 115 4.7 59.5” x 31.5” x 34.75” 28.5" 300
CTUF-2-60BM FZR 2 4 15 1/2 115 7.5 59.5” x 31.5” x 34.75” 28.5" 304
CTUR-3-72BM REF 3 6 18.3 1/3 115 5.2 71.5” x 31.5” x 34.75” 22.75" 337
CTUF-3-72BM FZR 3 6 18.3 1/2 115 7.67 71.5” x 31.5” x 34.75” 22.75" 342
Side Mount Compressor - Digital Temperature Read Out Included
CTUCRR-136 REF 1 2 9 1/5 115 3.0 35.5” x 31.5” x 34.5” 22.75" 230
CTUCFF-136 FZR 2
CTUCRR-248 REF 2 4 13 1/5 115 3.0 47.5" x 31.5” x 34.5” 17" 270
CTUCFF-248 FZR 2 4 13 1/2 115 7.5 47.5" x 31.5” x 34.5” 17" 280
CTUCRF-260 DUAL 2 4 9R + 9F 1/2 115 7.6 59.5" x 31.5” x 34.5” 22.75" 330
CTUCRF-372 DUAL 3 6 14R + 8F 1/2 115 8.12 71” x 31.5” x 34.5” 18.75" 380
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
2 9
1/3 115 4.4 35.5” x 31.5” x 34.5” 22.75" 240
Weight
lbs.
Standard Features and Benefits:
• Heavy duty stainless steel interior and exterior cabinet
construction, including top, with galvanized steel exterior bottom
and back wall, 4” diameter casters – two with brakes
• Insulated with 2.5” thick high density foamed in place
polyurethane foam
• Available back or side mount compressor with slide out
condensing unit for easy maintenance and repair (back
mount units front breathing)
8
www.tarrison.com 905-825-9665
• CFC free R-134A or R-404A refrigerant, evaporator copper
tube with anti-corrosive coating
• Condensate drain pan included
• Recessed handle, self closing doors with heavy duty
adjustable torsion spring, magnetic gasket and door heater
around cabinet frame
• Adjustable epoxy coated wire shelves – two per section - with
stainless steel clips
Glass Door Under Counter
TUCGR-260
Model No. Temp Doors
No. 0f
Shelves
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H*
Side Mount Compressor - Digital Temperature Read Out
TUCGR-248 REF 2 (sliding) 4 13 1/5 115 4.08 47.5" x 31.5” x 34.5” 282
TUCGR-260 REF 2 (sliding) 4 18 1/5 115 4.13 59.5" x 31.5” x 34.5” 339
TUCGR-272 REF 2 (sliding) 4 23 1/3 115 4.89 71.5” x 31.5” x 34.5” 390
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
TUCGR-248 TUCGR-260 TUCGR-272
Standard Features
Cabinet Construction
Heavy duty 430 stainless steel, and galvanized steel finished
bottom and back wall of exterior. High quality 304 stainless
steel interior and worktop, ABS evaporator drain cover. Insulated
with 2.5” thick high density foamed-in-place polyurethane foam.
Four 4” diameter casters (front casters with brakes). Door heater
installed around inside cabinet frame to prevent moisture build
up.
Refrigeration System
• Side mounted condensing unit for bigger compartment
use compared to back mounted units
• Oversized condenser and evaporator coil cools to set
temperature in a minimum time period and maintains it
• Removable side panel and slide-out condensing unit for
convenient repair and maintenance
• Environmentally friendly CFC free R-134A refrigerant
• Air defrost, temperature initiated and terminated
• Copper tube and aluminum fin evaporator with
anti-corrosive coating
• Energy efficient condensate drain pan assembly
heated by high side copper tube
• Pressure relief port located at exterior back wall for
rapid re-entry
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P
Doors (Sliding)
• Black PVC door frames
• Double pane glass system with a layer of transparent thermal
insulation film in between two layers
• Removable doors with stainless steel door tracks for easy cleaning
Lighting
• Safety shielded fluorescent interior lighting with on/off switch
Shelving
• Two epoxy coated wire shelves per section
• 304 stainless steel pilasters and shelf clips
Temperature Control
• Factory preset temperature, 35° F
• Setting temperature range from 33° F to 41° F
• Easy to read digital temperature display
• Easy to control temperature by simply pushing buttons
on control box
• Microchip digital monitoring system provided with various
functions for monitoring and maintaining ideal temperature
Weight
lbs.
www.tarrison.com 905-825-9665
9
Sandwich Prep Tables
1/6
1/6
ALL UNITS
8 1/2"
17 1/2"
8 1/2"
52 1/4"
1/6
1/6
1/6
ALL UNITS
8 1/2"
17 1/2"
8 1/2"
52 1/4"
1/6
1/6
1/6
1/6
1/6
48" Standard Side Mount Compressor
CTSP-2-48MT
CTSPT-248
48" MEGA-Back Mount Compressor
Model No. Doors
Pan
Capacity
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H*
Door
Width
MEGA-Back Mount Compressor
CTSP-1-27MT Megatop 1 9 x 1/6 6.5 1/5 115 4.1 27.5” x 35” x 34.75” 26.5" 230
CTSP-2-36MT Megatop 2 12 x 1/6 8.5 1/5 115 4.2 35.5” x 35” x 34.75” 17" 270
CTSP-2-48MT Megatop 2 18 x 1/6 11.8 1/4 115 4.2 47.5” x 35” x 34.75” 22.75" 310
CTSP-2-60MT Megatop 2 24 x 1/6 15 1/3 115 5.1 59.5” x 35” x 34.75” 28.5" 370
CTSP-3-72MT Megatop 3 30 x 1/6 18.3 1/3 115 5.2 71.5” x 35” x 34.75” 22.75" 440
Side Mount Compressor - Digital Temperature Read Out Included
CTSPT-136 1 8 x 1/6 9 1/5 115 3.97 35.5” x 31.5” x 34.75” 22.75" 290
CTSPT-248 2 12 x 1/6 13 1/4 115 4.01 47.5” x 31.5” x 34.75” 17" 330
CTSPT-260 2 10 x 1/4 15 1/4 115 4.01 59.5” x 31.5” x 34.75” 22.75" 373
CTSPT-372 3 12 x 1/4 23 1/3 115 5.20 71.5” x 31.5” x 34.75” 18.75" 450
*Height dimension includes casters, add 8.5" to height for roll cover • Sizes nominal, specifications subject to change without notice.
Standard Features
• Heavy duty stainless steel interior and exterior cabinet construction, including top, roll cover and hood, with galvanized steel exterior
bottom and back wall, 4” diameter casters – two with brakes
• Insulated with 2.5” thick high density foamed in place polyurethane foam
• Available back or side mount compressor with slide out condensing unit for easy maintenance and repair (back mount units front breathing)
• CFC free R-134A or R-404A refrigerant, evaporator copper tube with anti-corrosive coating
• Condensate drain pan included
• Recessed handle, self closing doors with heavy duty adjustable torsion spring, magnetic gasket and door heater around cabinet frame
• Adjustable epoxy coated wire shelves – two per section - with stainless steel clips
• Removable cutting board – 8.5” for Mega Back Mount; 12.25” for Side Mount
• Insulated roll cover to prevent moisture build up and heat exchange
Weight
lbs.
MEGA - Back Mount Compressor Standard - Side Mount Compressor
1/6
10
1/6
1/6
1/6
CTSP-2-60MT CTSP-3-72MTCTSP-1-27MT CTSP-2-36MT CTSP-2-48MT
1/6
CTSPT-136
CTSPT-260CTSPT-248 CTSPT-372
www.tarrison.com 905-825-9665
CTPPT-2-72
CTPPT-1-36
Pizza Prep Table
Standard Features and Benefits:
• Heavy duty stainless steel interior and exterior cabinet
construction, including top, lid and hood, with
galvanized steel exterior bottom and back wall, 4” diameter
casters – two with brakes
• Insulated with 2.5” thick high density foamed in place
polyurethane foam
• Side mount compressor with slide out condensing unit for easy
maintenance and repair
• CFC free R-134A refrigerant, evaporator copper tube with
anti-corrosive coating
• Condensate drain pan included
• Recessed handle, self closing doors with heavy duty
adjustable torsion spring, magnetic gasket and door heater
around cabinet frame
• Adjustable epoxy coated wire shelves – two per section -
with stainless steel clips
• Removable 19.25” cutting board
• Insulated lid to prevent moisture build up and heat exchange
Model No. Doors
CTPPT-1-36 1 2 4 x 1/3 9 1/5 115 3.97 35.5” x 36.5” x 35.25” 22.75" 249
CTPPT-2-72 2 4 9 x 1/3 23 1/3 115 6.30 71.5” x 36.5” x 35.25” 28.5" 458
*Height dimension includes casters, add 6.5" to height for lid • Depth includes 19 1/4" cutting board • Sizes nominal, specifications subject to change without notice.
No. 0f
Shelves
Pan
Capacity
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H*
Door
Width
Weight
lbs.
Chef Bases
Standard Features and Benefits:
• Heavy duty 304 series stainless steel interior and countertop,
and 430 series exterior
• One piece heavy duty worktop design constructed of
reinforced, 18 gauge, stainless steel
• 2.5” thick high density foamed-in-place polyurethane foam
insulation
• One piece snap-in magnetic door gasket design for easy
replacement
• Modern recessed door handle design
• Side-mount condenser design
• Removable side panel and slide-out condenser design for easy
repair and maintenance
• Energy efficient condensate drain pan heated by high side anti
corrosive coated tube
• Evaporator constructed of copper tubing and aluminum fins,
assembly treated with anti-corrosive coating
• Carel microchip digital control system with LED temperature
display
TCB52D2
Model No.
TCB52D2 2 6 1/4 115 3.9 52.25” x 32” x 25” 21.75" 284
TCB52-60D2 2 6 1/4 115 3.9 60” x 32” x 25” 21.75" 295
TCB72D4 4 8 1/4 115 5.2 72.25” x 32” x 25” 21.75" 370
TCB82D4 4 10 1/3 115 6.0 82.25” x 32” x 25” 21.75" 412
TCB82-84D4 4 10 1/3 115 6.0 84” x 32” x 25” 21.75" 417
TCB82-86D4 4 10 1/3 115 6.0 86.25” x 32” x 25” 21.75" 419
TCB96D4 4 12 1/3 115 6.0 95.5” x 32” x 25” 21.75" 452
*Height dimension includes casters • Sizes nominal, specifications subject to change without notice.
No. of
Drawers
Full Pan
Capacity
HP Volts Amps
Dimensions
L x D x H*
Drawer
Opening
Weight
lbs.
www.tarrison.com 905-825-9665
11
Back Bar Coolers
Standard Features and Benefits:
• Heavy duty 304 series stainless steel countertop and interior floor
• Textured black laminated steel exterior and galvanized steel interior
• High density foamed-in-place polyurethane foam insulation
• One piece snap-in magnetic door gasket design for easy replacement
• Modern recessed door handle design
• Door locks standard
• Side-mount condenser design (except for TBB24)
• Removable side panel and slide-out condenser design for easy repair
and maintenance (except TBB24, removable back panel)
• Energy efficient condensate drain pan heated by high side
anti-corrosive coated tube
• Evaporator constructed of copper tubing and aluminum fins,
assembly treated with anti-corrosive coating
• Heavy duty epoxy coated shelves standard
TBB24 TBB58 TBB68 TBB90
TBB58
Model No.
TBB24 1 2 8.19 1/5 115 3.9 23.5” x 31” x 39”* 22.75" 155
TBB58 2 4 20.09 1/4 115 4.2 57.75” x 27” x 37” 22.75" 280
TBB68 2 4 24.01 1/4 115 4.2 68” x 27” x 37” 22.75" 310
TBB90 3 6 32.37 1/3 115 4.5 89.25” x 27” x 37” 22.75" 390
*Height includes casters for TBB24 • Sizes nominal, specifications subject to change without notice.
No. of
Doors
No. of
Shelves
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H*
Door
Width
Glass Door Back Bar Coolers
Standard Features and Benefits:
• Heavy duty 304 series stainless steel countertop and interior floor
• Double pane glass doors with transparent thermal insulation
• Textured black laminated steel exterior and galvanized steel interior
• High density foamed-in-place polyurethane foam insulation
• One piece snap-in magnetic door gasket design for easy replacement
• Heavy duty die cast handles
• Door locks standard
• Side-mount condenser design (except for TBB24G)
• Removable side panel and slide-out condenser design for easy repair
and maintenance (except TBB24G, removable back panel)
• Energy efficient condensate drain pan heated by high side
anti-corrosive coated tube
• Evaporator constructed of copper tubing and aluminum fins,
TBB58G
assembly treated with anti-corrosive coating
• Heavy duty epoxy coated shelves standard
Weight
lbs.
TBB24G TBB58G TBB68G TBB90G
Model No.
TBB24G 1 2 8.19 1/4 115 4.2 23.5” x 31” x 39”* 22.75" 168
TBB58G 2 4 20.09 1/4 115 4.2 57.75” x 27” x 37” 22.75" 302
TBB68G 2 4 24.01 1/4 115 4.2 68” x 27” x 37” 22.75" 340
TBB90G 3 6 32.37 1/3 115 4.5 89.25” x 27” x 37” 22.75" 419
*Height includes casters for TBB24G • Sizes nominal, specifications subject to change without notice.
No. of
Doors
12
No. of
Shelves
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H*
www.tarrison.com 905-825-9665
Door
Width
Weight
lbs.
Direct Draw Keg Refrigerators
Standard Features and Benefits:
• Heavy duty 304 series stainless steel countertop and interior floor
• 3” diameter insulated stainless steel draft arm
(1 standard for TBD24, 2 standard for all others)
• Textured black laminated steel exterior and galvanized steel interior
• High density foamed-in-place polyurethane foam insulation
• One piece snap-in magnetic door gasket design for easy replacement
• Modern recessed door handle design
• Door locks standard
• Side-mount condenser design (except for TBD24)
• Removable side panel and slide-out condenser design for easy repair
and maintenance (except TBD24, removable back panel)
• Energy efficient condensate drain pan heated by high side
anti-corrosive coated tube
• Evaporator constructed of copper tubing and aluminum fins,
assembly treated with anti-corrosive coating
TBD58
Model No.
TBD24
TBD58
TBD68
TBD90
Height does not include draft arm • *Height includes casters for TBD24 Sizes nominal, specifications subject to change without notice.
No. of
Doors
1 1 8.19 1/4 115 3.9 23.5” x 31” x 39”* 22.75" 155
2 2 20.09 1/4 115 4.2 57.75” x 27” x 37” 22.75" 280
2 3 24.01 1/4 115 4.2 68” x 27” x 37” 22.75" 310
3 4 32.37 1/3 115 4.5 89.25” x 27” x 37” 22.75" 390
No. of
Kegs
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H
Horizontal Bottle Coolers
Standard Features and Benefits:
• Heavy duty 304 series stainless steel countertop
• Textured black laminated steel exterior and galvanized steel interior
• High density foamed-in-place polyurethane foam insulation
• Top directed airflow cools products from top to bottom ensuring bottles
on top cool faster
• Side-mount condenser design
• Removable side panel and slide-out condenser design for easy repair
and maintenance
• Energy efficient condensate drain pan heated by high side anti-corrosive
coated tube
• Evaporator constructed of copper tubing and aluminum fins, assembly
treated with anti-corrosive coating
• Heavy duty epoxy coated partitions standard
• Removable bottle cap opener with integrated cap receptacle
• Ratchet style lock for lids
TBC50
Door
Width
Weight
lbs.
Model No.
TBC37
TBC50
TBC65
TBC81
TBC96
*Depth does not include bottle cap opener with integrated cap receptacle - add 2.25" • Sizes nominal, specifications subject to change without notice.
No. of
Lids
1 2 9.3 1/4 115 4.2 36.75” x 26.75” x 33.75” 200
2 3 13.6 1/4 115 4.2 49.5” x 26.75” x 33.75” 240
2 4 18.9 1/4 115 4.2 64.5” x 26.75” x 33.75” 280
3 4 24.4 1/3 115 5.4 80.5” x 26.75” x 33.75” 330
3 6 29.6 1/3 115 5.4 95.5” x 26.75” x 33.75” 370
No. of
Partitions
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D* x H
www.tarrison.com 905-825-9665
Weight
lbs.
13
Sushi Cases
Standard Features and Benefits:
• Large single piece glass display window design
for wide viewing area and easy cleaning
• Self contained condensing unit design for easy setup
• Large front to back interior floor with rounded edges for easy cleaning
• Large nickel plated upper evaporator
• Reversible food plates can be turned upside down to
improve product cooling
• Condenser airflow intakes from the rear and exhausts through the side
• Large diameter drain at interior front
• Left and right condenser designs to suite installation requirements
TSC47R
Model No.
TSC47L Left 2 1.48 1/8 115 2.1 47.24” x 13.75” x 12” 80
TSC47R Right 2 1.48 1/8 115 2.1 47.24” x 13.75” x 12” 80
TSC59L Left 2 2.01 1/8 115 2.3 59” x 13.75” x 12” 100
TSC59R Right 2 2.01 1/8 115 2.3 59” x 13.75” x 12” 100
TSC71L Left 4 2.54 1/8 115 2.5 71” x 13.75” x 12” 115
TSC71R Right 4 2.54 1/8 115 2.5 71” x 13.75” x 12” 115
TSC83L Left 4 3.07 1/8 115 2.7 82.75” x 13.75” x 12” 135
TSC83R Right 4 3.07 1/8 115 2.7 82.75” x 13.75” x 12” 135
Sizes nominal, specifications subject to change without notice.
CDU
Mount
No. of
Doors
Capacity
(Cu. Ft.)
HP Volts Amps
Dimensions
L x D x H
Ice Bins and Pans
Keep Ice Close to Where it is Being Used
Standard Features and Benefits:
• Heavy duty stainless steel interior and exterior construction including
lid; mobile units come with 2.5” diameter casters – two with brakes
• Insulated with 1” thick high density foamed in place polyurethane
foam for cold air retention
• Removable lid for easy cleaning on Bin style; recessed lid on
mobile units; hinged lid on drop in units
• Perforated false bottom on Bin style to reduce ice clumping
• ½” welded in place stainless steel drain; Mobile units with
brass ball valve
• Creased interior bottom for complete drainage
• Adapter bars included on Pan Display style; pans not inclued
IBDI -1218
IPD-2
IBM-50
Weight
lbs.
IB M -10 0
Model No. Capacity Lid Type
MOBILE ICE BINS
IBM-50 50 lbs. Bulk Ice Sliding 11.25” x 24” x 28.5” 55
IBM-100 100 lbs. Bulk Ice Sliding 22.25” x 24” x 28.5” 82
DROP-IN BINS
IBDI-1218 15 lbs. Lift-up Hinged 11.5” x 18” x 14.5” 10.5” x 16.90” 25
IBDI-1226 30 lbs. Lift-up Hinged 11.5” x 26” x 14.5” 10.5” x 24.90” 45
DROP-IN PAN DISPLAY
IPD-1 1 Full Size Pan 15.25” x 23.5” x 7.5” 14.125” x 22.375” 25
IPD-2 2 Full Size Pans 29” x 23.5” x 7.5” 27.875” x 22.375” 35
IPD-3 3 Full Size Pans 42.75” x 23.5” x 7.5” 41.625” x 22.375” 45
IPD-4 4 Full Size Pans 56.5” x 23.5” x 7.5” 55.375” x 22.375” 60
Note: Dimensions for Drop-in models do not include 2” drain below the body of the units. Sizes and ice capacities nominal, specifications subject to change without notice.
Dimensions
W x D x H
Cut-Out
Dimensions
14
www.tarrison.com 905-825-9665
Weight
lbs.
Servery & Custom Fabrication
Tarrison Servery and Custom Fabrication is the perfect complement to Tarrison Commercial Refrigeration. All of the outstanding
features and benefits of Commercial Refrigeration can be built into your custom Servery line along with Hot, Induction, Griddle, Beverage,
Cashier, Utility and other needs. By modifying standard modules, each complete Servery line is built to your specific requirements - adding
custom components when necessary - to create a functional profit centre.
Servery lines can be enhanced with Sneeze Guards, Over Shelves, Tray Rails, Kick Plates and more as required. Likewise, Décor Panel Options
ranging from wood to laminate to solid surface to granite can provide the “finishing touch” to your design needs.
Refer to the Tarrison Servery Systems catalogue or visit our web site for more ideas. If you don’t see what you need, call us – we’ll come up
with a solution.
Custom Sneeze Guard
Custom Lift-o Night Cover
Custom Removable
Laminate Panels
Dual Profile for Optional Tray Rail
Customer and Operator view of
16' custom line up using Mega Top Sandwich units
Custom Adjustable Kick Plates
Custom Scrap Chute
Custom Tilting Mirror
Custom Hole for Cord Management
Custom Cutting Boards
Custom Solid Surface
Operator view of 8' Demonstration Center
using Back Mount Refrigerator
www.tarrison.com 905-825-9665
For more Servery solutions
view our 48 page catalogue
or website
15
More from Tarrison Products ...
To view a complete catalogue of our:
• Servery Systems and Stainless Steel Cabinet Series
... please call or visit our website
To view a complete catalogue of our:
• Commercial Stainless Steel Equipment
• Stainless Steel Sinks
• Storage and Handling Equipment
... please call or visit our website
US Sales Office
12 Riverview Drive, Essex Junction, VT, 05452
Phone: 802-872-9292 • Fax: 802-878-9603
info@tarrison.com • www.tarrison.com
To view a complete catalogue of our:
• Induction Cooking Systems
... please call or visit our website
To view a complete catalogue of our:
• Commercial Outdoor Cooking Equipment
... please call or visit our website
Corporate Head Office
2780 Coventry Road, Oakville, Ontario, L6H 6R1
Phone: 905-825-9665 • Fax: 905-825-0965
info@tarrison.com • www.tarrison.com
US Distribution Center
150 Gratiot Blvd., Marysville, MI, 48040
info@tarrison.com • www.tarrison.com
02/10 Specifications subject to change without notice. Tarrison ptroducts is not responsible for any errors or omissions.
Loading...