TARGUS Numeric Keypad User Manual [fr]

WIRELESS

NUMERIC KEYPAD

PAVÉ NUMÉRIQUE

SANS FIL

User Guide
Manuel de l’utilisateur

Targus Wireless Numeric Keypad

Introduction

Thank you for your purchase of the Targus Wireless Numeric Keypad. This
keypad is designed with a storable USB receiver, providing ease of use
when travelling.

Contents

• Targus Wireless Numeric Keypad

• 1 x AAA Battery

• 1 x USB Receiver

• User Guide

System Requirements

Hardware

• USB port

Operating System

• Microsoft Windows® 2000

• Microsoft Windows® XP

• Microsoft Windows Vista

• Microsoft Windows® 7

• Mac OS® X 10.4 or later

®

2

Targus Wireless Numeric Keypad

Installing the Batteries

1. Remove the battery cover from the back of the keypad.

2. Insert the supplied battery, making sure that the positive (+) and
negative (-) ends of each battery match the polarity indicators inside
the battery compartment.

3. Slide the battery cover back into position until it “clicks” firmly into place.

Battery compartment
cover

USB receiver

On/Off switch

Reset button

3

Targus Wireless Numeric Keypad

Connecting to Your Computer

1. Remove the USB receiver from the back of the keypad.

2. Plug the USB receiver into an available USB port on your computer.

3. Power on the keypad by using the On/Off switch located on the back of

the keypad.

This keypad is a plug and play device. It should automatically operate
when the USB receiver is connected to the computer.

NOTE: WHEN THERE IS COMMUNICATION BETWEEN THE KEYPAD AND THE RECEIVER, THE
LED ON THE RECEIVER WILL FLASH.

4

Targus Wireless Numeric Keypad

Re-Establishing a New Connection

If the response time of the keypad is slow or it intermittently stops working:

1. Unplug the USB receiver from the computer.

2. Plug the USB receiver into another available USB port and the LED
indicator will flash for 1 minute to indicate pairing mode is activated.

3. Power on the keypad and press the reset button to re-establish a new
connection.

Battery Life Indicator

The light will turn on when the power is low and batteries need to be
replaced.

Power Management

• To extend the life of your battery, turn off the keypad while travelling or

when you’re not using it.

5