Targus DV2K Quick Start Manual

1

Targus wants to ensure you get the best performance
from your Docking Station. Laptops usually ship with
outdated drivers, updating these drivers will optimize
the performance of your Docking Station.

Visit this website www.targus.com/us/usb3/setup
and we will guide you through updating the:

Laptop USB 3.0 Host Controller Driver

Laptop Video Card Driver
DisplayLink™ Video and Ethernet Driver

1

2

3

QUICK START GUIDE

UNIVERSAL USB 3.0

DV2K DOCKI NG STATION WITH POWER

Tips stored inside

IMPORTANT: DO NOT connect

the Docking Station until you have
updated the drivers on your laptop.

2

Windows® Setup

IMPORTANT: DO NOT connect the docking station prior to updating the drivers on your

laptop (see front page of this guide to update drivers)

1

Connect all peripheral devices to the docking station, including the

power adapter

2

Connect the Docking Station to your laptop

3

Windows will start installing the DisplayLink Driver automatically

4

Follow the on-screen instructions until the installation is complete

5

Identify the correct power tip (see chart above right), connect to the
DC power cable and then to the laptop

NOTE: If your power tip is not included, contact Targus to order the correct version

Power Setup

Docking Station Diagram

1

Locate the correct power tip
(test fit in laptop if needed)

2

Connect to the

power cord

3

Connect to

your laptop

Laptop Brand Power Tip(s) Laptop Brand Power Tip(s) Laptop Brand Power Tip(s)

Acer 3A, 3P Dell 3H, 3P, 3W HP 3H2, 3P, 3W

Asus 3P Fujitsu 3P IBM/Lenovo 3I2, 3P, 3X9

Compaq 3P, 3W Gateway 3A, 3P Toshiba

On/
Off

USB to

Laptop Port

USB 3.0

Ports

PowerInLaptop

Power

Gigabit

Ethernet

DP++/DVI-I

Selectable

DP++/DVI-I

Selectable

+

Audio

In

USB 3.0

Port

Audio

Out

Lock

Slot

USB 3.0 Port

w/BC 1.2 (1.5A)

iOS charging

3P