Targus DOCK180USZ Quick Start Manual

USB-C
DUAL VIDEO 4K

DOCKING STATION
WITH
POWER DELIVERY

QUICK START GUIDE

410-3652-001B / DOCK180USZ

Contents

• Targus USB-C Dual Video 4K Docking Station
with Power Delivery 2.0 (60W)

• USB-C Cable

• AC Power adapter

• USB-C to USB-A adapter

Workstation Setup

1. Connect all peripheral devices to the docking station

2. Connect the Targus Universal Docking Station to your host device.

+

3. If your host device does not connect via USB-C, use the included

USB-C to USB-A adapter as shown below.

Features and specifications are subject to change without notice. Microsoft
and Windows are registered trademarks of Microsoft Corporation in the United
States and/or other countries. All trademarks and registered trademarks are
the property of their respective owners. ©2017 Targus, 1211 North Miller
Street, Anaheim, CA 92806

Specifications

• 2 x DisplayPort (DP++; DP1.2) / HDMI Port (HDMI 2.0)

• 4 x USB 3.0 downstream ports (port marked with supports BC 1.2
and iOS device charging at 2.4A max)

• 1 x USB-C upstream port with supporting Power Delivery 2.0 Profile 4
(up to 60W max. charging)

• 1 x USB-C downstream port (USB 3.0, data transfer only)

• Gigabit Ethernet

• Audio In/Out ports (3.5mm headset connector)

• Security lock slot

• USB-C cable

• LED Power Indicator

• Power ON/OFF button

• 20.5V, 120W power adapter

Docking Station Diagram

USB to

Laptop Port

Power

Power InUSB 3.0

ON/OFF

Attach to DOCK180

Attach to PC

Gigabit

Ethernet

USB 3.0 Port

(supports charging)

DP++HDMIDP++HDMI

USB-C Port

Lock Slot

Audio

Headset Connector

System Requirements

Hardware

• Thunderbolt 3 or USB-C port

• Charging support requires host computer support Power Delivery 2.0 charging
(up to 60W max)

Operating System (any of the following)

• Microsoft Windows

• Mac OS

• Android 5.0 or later

• Chromebooks

• Ubuntu 14.04.x LTS and 16.04 LTS on x86 platform

®

Visit www.targus.com for a list of the latest compatible operating systems

®

X v10.8 or later

7, Windows® 8, Windows® 8.1, or Windows® 10 (32/64-bit)

Product Registration

Targus recommends that you register your Targus accessory shortly after
purchasing it. Go to:

http://targus.com/us/product_registration

You will need to provide your full name, email address, country of residence and
product information.

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operations.

Windows Setup

To ensure the best Windows performance, please be sure to update your host PC
Display Adaptor and USB 3.0 Drivers. These updates are often available from your
IT department or from the PC manufacturer if you have Administrator rights to
download and install drivers for your PC.
Welcome to your Targus Universal Docking Station DisplayLink Manager. The
DisplayLink Manager software, if not already installed, can be downloaded from a
Windows Update server or from www.targus.com. It is represented by the icon
in the Windows Task Tray and allows you to easily connect additional monitors to
your laptop or desktop via the Targus Docking Station. Using the Windows Control
Panel Display Screen Resolution window, the connected monitors can be
configured to either mirror your main screen, or extend the Windows desktop
allowing visibility of more applications at the same time. The DisplayLink USB
Graphics devices can also be configured to be the main display.

The DisplayLink Manager allows full configuration of all additional USB displays,
including:

• Support for addition USB Displays in Windows 7, 8, 8.1, 10 and later

• Resolution up to 4096 x 2160 for Displayport or HDMI

• Display orientation and location modification

• Layout of displays
DisplayLink software also provides drivers for Sound and Ethernet built-in. These
can also be selected in the Windows Control Panel.

OS-X Setup

Upon installation of the DisplayLink software for OS-X available at
www.targus.com, Macbook users can use the System Preferences for Displays to
adjust the external monitors. OS-X allows configuration of all additional USB
displays, including:

• Support for additional USB Displays in OS-X 10.9 or later

• Resolution up to 4096 x 2160 for Displayport or HDMI

• Display orientation and location modification

• Layout of displays
DisplayLink software also provides drivers for Sound and Ethernet built-in.

Android Setup

Install the DisplayLink Desktop application for Android 5.0 and later from the
Google Play Store. Enable USB Debugging/Host mode on your Android device.

Technical Support

For technical questions, please visit:
US

Australia

New Zealand

Internet: http://targus.com/us/support
Internet: http://www.targus.com/au/support
Email: [e-mail]
Telephone: [phone]
Telephone: [phone]

FCC Statement (Tested to Comply)

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Hereby, Targus declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive: 2014/30/EU and
2014/35/EU.

Three Year Warranty

We pride ourselves on the quality of our products. For complete warranty details
and a list of our worldwide offices, please visit www.targus.com. Targus product
warranty does not cover any device or product that is not manufactured by Targus
(including, but not limited to, laptops, smartphones, devices, or any other product
that may be used in connection with the Targus product). Australian customers:
For complete warranty details see warranty statement enclosed.
Targus is a registered trademark of Targus International LLC in the U.S. and in
certain other countries. Microsoft, Windows, and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries. Broadcom and the Broadcom logo are trademarks of Broadcom
Corp. Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG,
Inc., U.S.A. and licensed to Broadcom Corp. All logos and registered trademarks
are the property of their respective owners. ©2017 Targus, 1211 North Miller
Street, Anaheim, CA 92806. All rights reserved.

AUSTRALIAN AND NEW ZEALAND CONSUMERS ONLY
Thank you for your purchase. Targus warrants to the original purchaser that its
products are free from defects in materials and workmanship, during the specified
warranty period, and lasts as long as the original purchaser owns the product. The
warranty period is stated on the packaging or in the documentation provided with
this Targus product. Targus’ Limited Product Warranty excludes damage caused by
accident, neglect, abuse, misuse, improper care, normal wear and tear, ownership
transfer, or alteration. The limited warranty also excludes any product that is not
manufactured by Targus (including, without limitation, laptops, smartphones,
devices, tablets, or any other non-Targus item) that is used in connection with the
Targus product.
In the event that the Targus product has a defect in materials or workmanship
Targus will, after receiving a warranty claim and inspecting the product, at its
discretion, do one of the following: repair, replace, or refund with the same or a
similar product (or part) of no lesser quality and ship it to the original purchaser at
Targus’ expense. As part of this inspection, proof of purchase will be required.
There is no charge for inspection. To make a warranty claim, please contact Targus
Australia or New Zealand (see details below), or return the product to the place of
purchase. The original purchaser must bear the cost of the delivery to Targus.
Under Australian and/or New Zealand Consumer Laws, in addition to any warranty
Targus gives, our products come with guarantees that cannot be excluded. You are
entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are entitled to have the products
repaired or replaced if they fail to be of acceptable quality and the failure does not
amount to a major failure.
For any warranty question, contact Targus Australia Pty. Ltd. (i) by mail at Suite 2,
Level 8, 5 Rider Boulevard, Rhodes NSW 2138, by phone AUS 1800 641 645 or
NZ 0800 633 222 or by Email: [e-mail]. For additional information,
check out our website at targus.com/au/warranty.