Targus APA21US User Manual

Page 1
410-2169-001A / APA21US
User Guide
PLUG-N-POWER CHARGING STATION with USB CHARGING PORTS
1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide ofces, please visit www. targus.com. Features and specications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. All rights reserved. ©2011 Manufactured or imported by Targus Group International, Inc. (for U.S. sales: 1211 North Miller Street, Anaheim, CA 92806 USA)
Page 2
Targus Plug-N-Power Charging Station with USB Charging Ports
2
Targus Plug-N-Power Charging Station with USB Charging Ports
3
Charging Station
Introduction
AC outlets with 540 Joules of surge protection
USB charging ports (2.1A) for rapid charging of tablets
Thanks for buying the Targus Plug-N-Power Charging Station with USB Charging Ports. It simply turns any wall outlet into a mobile device charging station. This product is perfect to use in kitchens, bathrooms and garages, and mounts securely to any 2 socket AC outlet.
Green LED shows your devices are protected
Normal Installation
Plug the Charging Station to a 2-socket AC wall outlet. Check AC blades are properly mounted in the socket.
Using the Charging Station
Specication
Electrical Rating: AC120V 15A 60Hz 1800Watts Max. Peak Spike Current: 36000A Max. Spike Voltage: 6KV EMI/RFI Noise Filter: 150KHz to 100MHz Operating Temperature: 0°C - +35°C Storage Temperature: -20°C - +65°C
For standard AC powered devices
For tablets (2.1A)
For mobile devices
Page 3
Targus Plug-N-Power Charging Station with USB Charging Ports
4
Targus Plug-N-Power Charging Station with USB Charging Ports
5
Screw Mounted Installation
1. Remove the original screw in the center of the face plate, making sure to leave the face plate in place.
2. Install the Charging Station as indicated above for Normal Installation.
3.Using the long center screw that came with the Plug-N-Power Charging Station, screw the Charging Station into place with a philips head screwdriver.
Some wall outlet face plates have a center screw hole which can be utilized for a more permanent installation. While this is not necessary for normal use of the Charging Station, it offers a more secure form of mounting.
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and product information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship for two years. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss. Under no conditions is Targus liable for loss of, or damage to, a computer or other device(s); nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility. This warranty does not affect your statutory rights.
Technical Support
For technical questions, please visit:
US Internet: www.targus.com/support.asp
Regulatory Compliance
(applicable to products with electronic circuitry/parts only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may notcause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Compatible with most 5 volt tablets. Some tablets require the use of a USB charging dongle, available for free from Targus.com when you register your product.
Page 4
Targus Plug-N-Power Charging Station with USB Charging Ports
6
Features and specications are subject to change without notice. All trademarks and registered trademarks are the property of their respective owners. All right reserved. ©2011, Targus Group International, Inc. and Targus, Inc, Anaheim, CA 92806, USA.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not authorized by the party responsible for compliance could void the user’s authority to operate this product.
Loading...