1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our
products. For complete warranty details and a list of our worldwide oces,
please visit www.targus.com. Features and specications are subject to
change without notice. Microsoft, Windows, Windows Vista, PowerPoint and
Windows Media Player are registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. Mac, Keynote and
iTunes are all registered trademarks of Apple Inc., registered in the U.S. and
410-2788-001A / AMP23US
Folded Size: 4.5” x 4.5”
other countries. All trademarks and registered trademarks are the property
Thank you for your purchase of the Targus Multimedia Presentation Remote. This cordless
remote also offers true plug and play capability with no need for software drivers, while
the long-range 2.4 GHz technology allows for effective presentations up to 50 feet (15 m).
Contents
• Targus Multimedia Presentation Remote
• Mini USB Receiver
• 1 x AAA Battery
• User Guide
System Requirements
Hardware
• USB port
Operating System
• Microsoft Windows® XP
• Microsoft Windows Vista
• Microsoft Windows® 7
• Microsoft Windows® 8
• Mac OS® X 10.4 to 10.8
Setting Up Your Remote
Installing the Battery
Press and slide to remove the battery cover for battery installation.
Slide to open
Insert the supplied battery, making sure the positive (+) and negative (-) end of the battery
match the polarity indicators inside the battery compartment.
®
23
410-2788-001A_AMP23US_031313_CA cert usage.indd 2-314/3/13 9:58 AM
This device can function as a presenter or a wireless mouse by using the mode switch (12).
Using the Device — Presenter Mode
Press and hold for 3 seconds to turn on the remote.
1Power button
2Slide showStart-press once to start, Stop-press once to stop
3Blank screen buttonThe screen will become blank/dark.
4Page Forward/Next slidePress once to go to next slide.
5Page Backward/Previous slide Press once to go back one slide.
6Laser pointerLaser light is emitted from the opening.
7Laser ButtonPress and hold to activate the green laser pointer.
8KeyLock button
9LEDLED will blink red when low battery
67
LED will turn green.
Press and hold for 3 seconds to turn o the remote.
LED will shut o.
Press once to enable KeyLock function.
- Disables all keys except the laser, page forward/ next slide and
page backward/previous slide buttons.
- LED will turn Red.
Press once to exit the KeyLock function.
- LED will return to Green.
410-2788-001A_AMP23US_031313_CA cert usage.indd 6-714/3/13 9:58 AM
• To avoid possible eye damage, never point the remote’s laser at people, especially their
faces, or look directly into the remote’s laser beam.
• Avoid pointing the remote’s laser beam at a mirror or other highly-reflective surface.
• Keep the remote away from young children.
• Never view the remote’s laser beam using telescopic devices, such as a microscope or
binoculars.
• Any attempt to disassemble, adjust or repair the remote may result in exposure to laser
light or other safety hazards.
Troubleshooting
What do I do if the response time of the remote is slow or it intermittently stops working?
• Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and computer.
• Increase the distance between the remote’s receiver and the base units of other wireless
devices.
• Turn off any wireless devices and their base units that are near the remote’s receiver.
• Replace the battery.
Technical Support
For technical questions, please visit:
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: infoaust@targus.com
Telephone: 1800-641-645
New ZealandTelephone: 0800-633-222
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing it. Go
to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and product
information.
One Year Warranty
1. Targus warrants to the original purchaser that its products are free from defects in
materials and workmanship for one year. This warranty is limited to defects, materials
and workmanship. 2. The benefits to the consumer given by the warranty are in addition
to other rights and remedies of the consumer under law in relation to the goods to which
the warranty relates. 3. The warranty is given by (i) Targus Australia, (ii) Targus Australia’s
business address is: 117-119 Bowden Street, Meadowbank, NSW 2114 Australia, (iii) Targus
Australia’s telephone number is 1800 641 645, Email: infoaust@targus.com (iv) To make a
warranty claim for goods purchased in New Zealand, the telephone number is: 0800 633
222, or the goods may be returned to the supplier in New Zealand. 4. What the purchaser
must do to entitle the purchaser to claim warranty:- (i) The purchaser must call the telephone
number for Australia or New Zealand set out above, (ii) The purchaser must provide the
89
410-2788-001A_AMP23US_031313_CA cert usage.indd 8-914/3/13 9:58 AM
purchaser’s name, daytime contact number, business hours delivery address, the Targus
model number on the product, date and place of purchase with receipt for purchase if
required, and describe the fault condition. 5. What Targus must do:- (i) Targus will provide
the purchaser with store return information or a return authorisation so that the purchaser
may return the product for warranty inspection, (ii) If after inspection Targus finds the
product is defective in materials or workmanship, Targus shall replace (or repair) the
defective product at the discretion of Targus and ship the product from Targus warehouse
at its expense within three business days (Monday to Friday excluding public holidays)
of receiving the returned goods. If the product is no longer available Targus reserves the
right to replace with the nearest corresponding product of no lesser quality, (iii) Targus
will bear the cost of return delivery to the purchaser regardless of the inspection test
result. The purchaser must bear the cost of the delivery to Targus. There is no charge
for inspection. 6. Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonable foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. 7. Please note: (i) Features
and specifications of all Targus products are subject to change without notification, (ii) In
some instances: Goods presented for repair may be replaced by refurbished goods of the
same type rather than being repaired. Refurbished parts may be used to repair the goods,
(iii) If goods accepted for repair retain user-generated data: During the process of repair
some or all of your stored data may be lost. Please ensure that you have saved this data
elsewhere prior to repair.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
FCC Statement
Tested to Comply
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
1011
410-2788-001A_AMP23US_031313_CA cert usage.indd 10-1114/3/13 9:58 AM
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.”
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil nedoit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.”
AVOID EXPOSURE — HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS
APERTURE.
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS. CLASS 2 LASER PRODUCT.
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY,
AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE
FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A
PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A
CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE
DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH
AS DRIVING.
CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS
A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO
FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
1213
410-2788-001A_AMP23US_031313_CA cert usage.indd 12-1314/3/13 9:58 AM
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.