1 YEAR LIMITED WARRANTY: We pride ourselves
on the quality of our products. For complete warranty
details and a list of our worldwide offices, please visit
www.targus.com. Features and specifications are
subject to change without notice. All trademarks and
registered trademarks are the property of their respective owners. All rights reserved. ©2009 Manufactured
or imported by Targus Group International, Inc. (for
U.S. sales: 1211 North Miller Street, Anaheim, CA
92806 USA) whose Australian sales representative
401-XXXXXXXXXXX
is Targus Australia Pty. Ltd., 117-119 Bowden Street,
Meadowbank, NSW 2114 Australia
Cordless
Numeric Keypad
User Guide
Targus Cordless Numeric Keypad
Targus Cordless Numeric Keypad
Introduction
Thank you for purchase of the Targus Cordless Numeric Keypad. This
keypad is designed with a storable USB receiver, providing ease of use
when traveling.
Contents
• Targus Cordless Numeric Keypad
• 1 x AAA battery
• User guide
System Requirements
Hardware
• USB interface
Operating System
• Microsoft Windows® 2000
• Microsoft Windows® XP
• Microsoft Windows Vista
• Mac OS® X 10.4 or later
®
2
Installing the Batteries
1 Remove the battery cover from the back of the keypad.
2 Insert the supplied battery, making sure that the positive (+) and negative
(-) ends of each battery match the polarity indicators inside the battery
compartment.
3 Slide the battery cover back into position until it “clicks” firmly into place.
Battery Compartment
Cover
USB Receiver
On/Off switch
Reset button
3
Targus Cordless Numeric Keypad
Targus Cordless Numeric Keypad
Connecting to Your Computer
1. Remove the USB receiver from the back of the keypad.
2. Plug the USB receiver into an available USB port on your computer.
3. Power on the keypad by using the on/off switch located on the back of
the keypad.
This keypad is a plug-n-play device. It should automatically operate when
the USB receiver is connected to the computer.
NOTE: WHEN THERE IS COMMUNICATION BETWEEN THE KEYPAD AND THE RECEIVER, THE
LED ON THE RECEIVER WILL FLASH.
4
Power Management
• To extend the life of your battery, turn off the keypad while traveling or
when you’re not using it.
5
Targus Cordless Numeric Keypad
Targus Cordless Numeric Keypad
Technical Support
For technical questions, please visit:
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: infoaust@targus.com
Telephone: 1800-641-645
New Zealand Telephone: 0800-633-222
Product Registration
Targus recommends that you register your Targus accessory shor tly after
purchasing it. Go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and
product information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship
for one year. If your Targus accessory is found to be defective within that time, we
will promptly repair or replace it. This warranty does not cover accidental damage,
wear and tear, or consequential or incidental loss. Under no conditions is Targus
liable for loss of, or damage to devices; nor loss of, or damage to, programs,
records, or data; nor any consequential or incidental damages, even if Targus has
been informed of their possibility. This warranty does not affect your statutory rights.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not authorized by the party responsible for compliance could
void the user’s authority to operate this product.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries. All trademarks and registered trademarks are the property of their respective owners. All rights
reserved. Features and specifications are subject to change without notice. © 2009. Targus Group International, Inc. and
Targus, Inc., Anaheim, CA 92806 USA
6
7
Loading...