Targa 22, Visionary LCD 22-1 User Manual And Service Information
LCD-DISPLAY 22"
GB
User manual and
IE
CY
service information
Targa Visionary LCD 22-1 Wide
Targa Visionary LCD 22-1 Wide
Operating Notes
First of all, many thanks for choosing this high-end multiscan
monitor. Before starting installation, please read this manual
completely.
Intended Use
This TFT monitor is an IT electronic device. It may only be used for
private use, not industrial or other commercial purposes.
Furthermore, the device may not be used outdoors or in tropical
climates. Only connection cables and external devices may be used
that comply with safety standards and the electromagnetic
compatibility and shielding quality of this device. This device fulfils
all that relates to CE Conformity, relevant norms and standards.
Any modifications to the equipment other than recommended
changes by the manufacturer may lead to the result that these
directives are not met any more. Only use the accessories
recommended by the manufacturer.
English
Conformity
This device fully complies with the basic and other
relevant requirements of the EMC Directive
2004/108/EC, as well as the Low-voltage Directive
2006/95/EC.
You’ll find the signed CE Declaration of Conformity on
the website www.service.targa.co.uk.
The Declaration of Conformity can also be found at the
end of this User's Manual.
1
Targa Visionary LCD 22-1 Wide
Table of Contents
English
Operating Notes............................................................................... 1
Intended Use ............................................................................................1
Conformity ................................................................................................1
Table of Contents ............................................................................ 2
Safety Information............................................................................ 3
Warnings................................................................................................... 3
Disposal of Old Devices ...........................................................................5
Getting started ................................................................................. 6
Back Panel Connectors ............................................................................ 7
Quick Guide .............................................................................................. 7
Setting the Resolution ..............................................................................8
Front Panel Controls................................................................................. 9
Setting the Menu Language ...................................................................10
Button Function Overview ......................................................................11
OSD Menu ..................................................................................... 13
Advanced....................................................................................... 17
Supported resolutions............................................................................. 17
Wall-Mounting.........................................................................................18
Technical Specifications .........................................................................19
Troubleshooting...................................................................................... 20
Pixel Error Classes .................................................................................20
2
Targa Visionary LCD 22-1 Wide
Safety Information
During the manufacturing and testing of this monitor, the safety of
the future user was our main goal. However, inadequate operation
or installation can cause damage to the device and harm to the
user. Therefore, please first read the following warnings prior to
starting with its installation. Proceed exactly as described in the
instructions. Keep this manual for any future reference.
Warnings
Connect the monitor to a grounded wall outlet only, with a
rating identical to those on the label of the back panel of the
unit. If you are not sure about the electrical output, please
contact a qualified electrician or your local electrical company.
Warning: The wall outlet must be within easy reach and next to
the device.
Do not use any extension cords.
English
Only use accessories recommended by the manufacturer
(cables, stand, cart, etc.).
Move the device carefully to avoid it from tipping over.
For your own safety, remember that the monitor will be fully
separated from the mains only when the power cord has been
disconnected from the wall outlet.
During a thunderstorm, unplug the device from the mains
power by unplugging the power cord. Do this also when you are
not going to use the device for a long period of time.
Do not attempt to repair the monitor yourself. Any repair must
be performed by a qualified technician.
3
Targa Visionary LCD 22-1 Wide
English
Place the monitor in a clean, dry environment.
Do not place any recipients containing liquids (beverages,
Do not place any fire sources (e.g. burning candles) on or near
Disconnect the power supply immediately if liquid gets into the
Do not open the monitor’s housing.
components inside the device may produce an electric shock
even after the power cord has been disconnected.
Do not use the device if the casing is damaged. If this happens,
it must first be examined by authorized service personnel.
vases, etc.) onto or next to the device.
the device.
device and seek the help of a service technician.
Unplug the device from the mains before cleaning the monitor.
First spray an ammonia-free detergent onto a cloth to slightly
dampen it, and do not spray it onto the display itself.
The high-voltage
Do not place the monitor next to any magnetic objects, electric
motors, TV sets or transformers.
Do not place the device near heat sources such as radiators,
ovens or other appliances emitting heat.
Do not place heavy objects on the cable or power supply.
Position the cables so that they cannot obstruct or catch
anyone.
The output connectors of the connected devices must be within
easy reach and next to the monitor.
Always make sure there is sufficient ventilation. Do not place
any device onto the display preventing proper ventilation and
cooling.
4
Targa Visionary LCD 22-1 Wide
If you notice any smoke, unusual noise or strange smells,
switch off the LCD display immediately and pull the plug out
from the wall outlet. Contact customer service. It is very
dangerous to continue using the LCD display under these
conditions.
To avoid electric shock or fire, prevent this product from being
exposed to rain, dripping or splashing.
Children: electrical appliances do not belong in the hands of
children. Do not allow children to use electrical devices when
not under supervision. Children may not comprehend the
presence of potential risks. Keep all packaging away from
children as this can cause suffocation.
If you are not using the device within the Republic of Germany,
you must observe the regulations and laws in the country of
use.
Disposal of Old Devices
Devices marked with this symbol are subject to the
European Directive 2002/96/EC. All electric and electronic
devices must be disposed of separately from household
waste at established bodies. Avoid hazards to the
environment and dangers to your personal health by disposing of
the device properly. For further information about proper disposal,
contact your local government, disposal bodies or the shop where
you bought the device.
English
5
Targa Visionary LCD 22-1 Wide
Getting started
English
Mount the supplied socket to the base of your LCD 22-1 Wide as
indicated on the bottom of the base.
Please check that delivery contents are complete using the list
below:
1 - Monitor
2 - VGA cable
3 - Audio cable
4 - Power cord
(not illustrated)
5 - User’s Manual
(not illustrated)
6
Back Panel Connectors
Targa Visionary LCD 22-1 Wide
6 7 8 9
Quick Guide
1. Connecting the Video Cable
Power your monitor and computer off.
Use the VGA cable (2) to connect the computer to the port (9)
of the monitor.
2. Connecting the Audio Cable
Use the audio cable (3) to connect the computer’s Audio Out
port to the audio input (8) of your monitor.
3. Connecting the Power Cord
Connect the power cord (4) to the power receptacle (7) of the
monitor. Connect the other end to a wall outlet.
4. Powering On
To power the monitor on, toggle the power switch (6) located
on the back panel of the unit to “I”. If the front-panel power
indicator (16) does not light, press the On/Standby button (15)
on the front panel of the unit.
English
7
Loading...