Page 1
LCD-DISPLAY 19"
GB
User manual
IE
CY
Targa Visionary LCD 19-4 Wide
Page 2
Targa Visionary LCD 19-4 Wide
Operating Notes
First of all, many thanks for choosing this high-end multiscan
monitor. Before starting installation, please read this manual
completely.
Intended Use
This TFT monitor is an IT electronic device. It may only be used for
private use, not industrial or other commercial purposes.
Furthermore, the device may not be used outdoors or in tropical
climates. Only connection cables and external devices may be
used that comply with safety standards and the electromagnetic
compatibility and shielding quality of this device. This device fulfils
all that relates to CE Conformity, relevant norms and standards.
Any changes to the equipment other than the recommended
changes by the manufacturer may lead to the result that these
directives are not met any more. Only use accessories
recommended by the manufacturer.
English
Conformity
The LCD screen LCD 19-4 Wide has been tested
and approved for compliance with the basic and
other relevant requirements of the EMC Directive
2004/108/EC and the Low-voltage Directive
2006/95/EC.
1
Page 3
Targa Visionary LCD 19-4 Wide
Table of Contents
English
Operating Notes.............................................................................. 1
Intended Use ............................................................................................1
Conformity ................................................................................................1
Table of Contents ........................................................................... 2
Safety Information........................................................................... 3
Warnings...................................................................................................3
Disposal of Old Devices ...........................................................................5
Getting Started................................................................................ 6
Back Panel Connectors............................................................................7
Quick Guide..............................................................................................7
Setting the Resolution ..............................................................................8
Front Panel Controls.................................................................................9
Setting the Menu Language ...................................................................10
Button Function Overview ......................................................................11
OSD Menu.................................................................................... 12
Contrast/Brightness................................................................................12
Advanced...................................................................................... 15
Supported resolutions.............................................................................15
Wall-Mounting.........................................................................................16
Technical Specifications.........................................................................17
Troubleshooting......................................................................................18
Pixel Error Classes.................................................................................18
2
Page 4
Targa Visionary LCD 19-4 Wide
Safety Information
During the manufacturing and testing of this monitor, the safety of
the future user was our main goal. However, inadequate operation
or installation can cause damage to the device and harm to the
user. Therefore, please first read the following warnings prior to
starting with its installation. Proceed exactly as described in the
instructions. Keep this manual for any future reference.
Warnings
• Connect the monitor to a grounded wall outlet only, with a
rating identical to those on the label of the back panel of the
unit. If you are not sure about the electrical output, please
contact a qualified electrician or your local electrical company.
• Warning: The wall outlet must be within easy reach and next to
the device.
• Do not use any extension cords.
English
• Only use accessories recommended by the manufacturer
(cables, stand, cart, etc.).
• Move the device carefully to avoid it from tipping over.
• For your own safety, remember that the monitor will be fully
separated from the mains only when the power cord has been
disconnected from the wall outlet.
• During a thunderstorm, unplug the device from the mains
power by unplugging the power cord. Do this also when you are
not going to use the device for a long period of time.
• Do not attempt to repair the monitor yourself. Any repair must
be performed by a qualified technician.
3
Page 5
Targa Visionary LCD 19-4 Wide
• Do not open the monitor’s housing. The high-voltage
English
• Do not use the device if the casing is damaged. If this happens,
• Place the monitor in a clean, dry environment.
• Do not place any recipients containing liquids (beverages,
• Do not place any fire sources (e.g. burning candles) on or near
• Disconnect the power supply immediately if liquid gets into the
• Unplug the device from the mains before cleaning the monitor.
components inside the device may produce an electric shock
even after the power cord has been disconnected.
it must first be examined by authorized service personnel.
vases, etc.) onto or next to the device.
the device.
device and seek the help of a service technician.
First spray an ammoniac-free detergent onto a cloth to slightly
dampen it, and do not spray it onto the display itself.
• Do not place the monitor next to any magnetic objects, electric
motors, TV sets or transformers.
• Do not place the device near heat sources such as radiators,
ovens or other appliances emitting heat.
• Do not place heavy objects on the cable or power supply.
Position the cables so that they cannot obstruct or catch
anyone.
• The output connectors of the connected devices must be within
easy reach and next to the monitor.
• Always make sure there is sufficient ventilation. Do not place
any device onto the display preventing proper ventilation and
cooling.
4
Page 6
Targa Visionary LCD 19-4 Wide
• If you notice any smoke, unusual noise or strange smells,
switch off the LCD display immediately and pull the plug out
from the wall outlet. Contact customer service. It is very
dangerous to continue using the LCD display under these
conditions.
• To avoid electric shock or fire, prevent this product from being
exposed to rain, dripping or splashing.
• Children: electrical appliances do not belong in the hands of
children. Do not allow children to play with electrical devices
when not under supervision. Children may not be able to
comprehend the presence of potential risks. Keep all packaging
away from children as this can cause suffocation.
• If you are not using the device within the Republic of Germany,
you must observe the regulations and laws in the country of
use.
Disposal of Old Devices
Devices marked with this symbol are subject to the
European Directive 2002/96/EC. All electric and electronic
devices must be disposed of separately from household
waste at established bodies. Avoid hazards to the
environment and dangers to your personal health by disposing of
the device properly. For further information about proper disposal,
contact your local government, disposal bodies or the shop where
you bought the device.
English
5
Page 7
Targa Visionary LCD 19-4 Wide
Getting Started
English
Mount the supplied socket to the base of your LCD 19-4 Wide as
indicated on the bottom of the base.
Please check that delivery contents are complete using the list
below:
1 - Monitor
2 - VGA cable
3 - Audio cable
4 - Power cord
5 - User Manual
6
Page 8
Back Panel Connectors
Targa Visionary LCD 19-4 Wide
6 7 8
Quick Guide
1. Connecting the Video Cable
Power your monitor and computer off.
Use the VGA cable (2) to connect the computer to the port (8)
of the monitor.
2. Connecting the Audio Cable
Use the audio cable (3) to connect the computer’s Audio Out
port to the audio input (7) of your monitor.
English
3. Connecting the Power Cord
Connect the power cord (4) to the power receptacle (6) of the
monitor. Connect the other end to a wall outlet.
4. Powering On
First turn on your computer then turn on the monitor.
7
Page 9
Targa Visionary LCD 19-4 Wide
Setting the Resolution
The recommended screen resolution for your LCD 19-4 Wide is
English
1440 x 900 (max. refresh rate 60 Hz). In the following we will
explain the resolution setting for the operating systems Windows
XP and Windows Vista™.
For Microsoft
For Microsoft
®
®
Windows® XP:
- Right-click on the Desktop.
- Click on “Properties”.
- Click on the “Settings” tab.
- Use the ruler to select the proper screen resolution.
- Confirm the setting by clicking “OK”.
®
Windows Vista™:
- Right-click on the Desktop.
- Click Start/Control Panel to open “Control Panel”.
- From the group “Appearance and Personalization”, click the
“Adjust screen resolution” link.
- Use the ruler to select the proper screen resolution.
- Confirm the setting by clicking “OK”.
8
If the recommended resolution of 1440 x 900 is not
available on your computer, please update the driver of
the graphics card. Contact the manufacturer of the
computer or the graphics card.
Page 10
Front Panel Controls
Targa Visionary LCD 19-4 Wide
11 13 15
12 14 16
11. Display / hide the OSD menu.
12. Decrease value / navigate downwards
English
13. Increase value / navigate upwards
14. To confirm the settings
15. Power On/Off
16. Power indicator
9
Page 11
Targa Visionary LCD 19-4 Wide
Setting the Menu Language
You can display the OSD (On Screen Display) menu in your local
English
language. Proceed as follows:
1. Press the button 1 (11) on the monitor.
2. Press the button (12) to select the menu option “Setup
Menu”.
3. Press the button 2 (14).
The “Setup Menu” opens and the item “Language Select”
should be highlighted. Otherwise press the buttons
(12) or
(13) to select it.
4. Press the button 2 (14).
5. Press the button (12) to scroll downwards or press (13)
to scroll upwards to select the desired display language.
6. Press the button 2 (14) to confirm your selection.
7. Wait until the menu disappears or press the button 1 (11)
twice to exit the menu immediately.
A menu language does not exist for all countries. Please
select a suitable menu language as necessary.
10
Page 12
Button Function Overview
A
Targa Visionary LCD 19-4 Wide
1
2
1
1
and
and
Show/hide main menu
Press once to open the brightness setting.
Reduces the brightness.
Increases the brightness.
Opens the contrast setting.
2
Exits the setting.
1
Press once to open the contrast setting.
Reduces the contrast.
Increases the contrast.
Opens the brightness setting.
2
Exits the setting.
1
utomatically adjusts the settings for the horizontal and
vertical position, the horizontal size as well as the fine
control and sharpness.
Long-press both buttons for approx. 10 seconds to
enable or disable the Power lock. The Power lock will
enable or disable the Power On/Off switch.
Long-press both buttons for approx. 10 seconds to
enable or disable the OSD lock. The OSD lock will
prevent the OSD menu from being displayed.
English
11
Page 13
Targa Visionary LCD 19-4 Wide
OSD Menu
English
Via the OSD menu you can access multiple settings to customize
the LCD 19-4 Wide according to your and your computer’s
requirements.
Use the buttons 11 to 14 (as described on page 9) to navigate the
menu.
Start with the main menu by pressing the button 1 on the monitor.
Press the buttons and to choose a menu item, press the
button 2 to confirm the selection.
12
Auto Adjust
Automatically adjusts the settings for the horizontal and
vertical position, the horizontal size as well as the fine
control and sharpness.
Contrast/Brightness
Opens the Contrast menu. By pressing button 2 you can
also open the Brightness menu.
Page 14
Targa Visionary LCD 19-4 Wide
Color Adjust
Choose between the following options:
9300K: Adds blue to the picture achieving a cooler white.
6500K: Adds red to the picture achieving a warmer white.
5400K: Adds green to the picture achieving a darker
colour tint.
User Color: Custom settings for red (R), green (G) and
blue (B).
Press the button 2 to select the desired colour and press
the buttons or to adjust the selected colour.
Information
Shows information about the input signal coming from
your computer’s graphics card as well as the model and
serial number of your monitor.
Image Adjust
To manually adjust the picture position.
H./V. Position sets the horizontal and vertical picture
position.
H. Size sets the horizontal picture size.
Fine Tune sets the picture delay and therefore the
sharpness.
English
Sharpness (available only if the set resolution does not
match the recommended resolution of 1440x900). If
necessary, re-adjust the sharpness.
Setup Menu
Choose between the following options:
13
Page 15
Targa Visionary LCD 19-4 Wide
English
Language Select: Here you select the menu language.
Resolution Notice: If you enable this function, a
message will remind you every 30 seconds to set the
optimum picture resolution. This message appears only if
the set resolution does not match the recommended
resolution of 1440x900.
OSD Position: Press the button 2 to toggle between
horizontal and vertical movement. Press or to move
the OSD menu upwards, downwards, to the left or to the
right.
OSD Time Out: After the set time, the OSD menu will
disappear if you don’t perform any further settings. You
can select values between 5 and 60 seconds.
Memory Recall: Restores the factory-default video and
audio configuration. The selected language will not
change.
14
Audio Menu: The option “Volume” allows you to adjust
the volume of the built-in speaker, the option “Mute” lets
you disable the sound.
Page 16
Advanced
Supported resolutions
VESA 640 x 480 @ 75Hz
MAC 640 x 480 @ 67Hz
VGA 640 x 480 @ 70Hz
VGA 720 x 400 @ 70Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
VESA 848 x 480 @ 60Hz
VESA 1024 x 768 @ 60Hz
MAC 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
Targa Visionary LCD 19-4 Wide
English
VESA 1152 x 864 @ 75Hz
VESA 1280 x 960 @ 60Hz
VESA 1280 x 720 @ 60Hz
VESA 1280 x 768 @ 60Hz
VESA 1280 x 768 @ 75Hz
VESA 1280 x 1024 @ 60Hz
VESA 1280 x 1024 @ 75Hz
VESA 1360 x 768 @ 60Hz
VESA 1440 x 900 @ 60Hz
Warning: Do not set your computer’s graphics card refresh rate to
a value exceeding the above maximum limits. Otherwise you risk
seriously damaging your monitor.
15
Page 17
Targa Visionary LCD 19-4 Wide
Wall-Mounting
You can mount your LCD 19-4 Wide to the wall by using a VESA
English
wall mount with a 100 x 100 mm receptacle. To do so, disassemble
the base as follows:
1. Power the device off and unplug all cables and connectors.
For the following steps you’ll need a conventional Philips
screwdriver.
2. Lie a soft cloth on an empty, level table and carefully place
the LCD 19-4 Wide with its front on it.
3. Loosen the monitor socket by carefully pushing the four
hooks inwards and pulling the socket towards the bottom.
4. Loosen the four screws located inside the base. Next you
can pull the base off downwards. You can remove the
copper loop as well as the cable contained in the base
together with the base.
5. Install the VESA wall mount on the back of the monitor.
Follow the installation instructions that came with your wall
mount kit.
Note: Keep the base, the socket and the screws in a safe place in
case you need to reassemble the base again.
16
Page 18
Targa Visionary LCD 19-4 Wide
Technical Specifications
LCD Display 19.0” Wide TFT (16:10)
Power Management
Supported Resolution
Pixel size 0.285 x 0.285 mm
Display Colours 16.2 million
Viewing angle 160°/160° (CR > 10)
Inclination 0°~20°
Contrast Ratio 800:1 (typical)
Brightness 300 cd/m² (typical)
Response time 5 ms (typical)
Active Screen Area 410 mm x 256 mm
Temperature Operation: 0°C ~ + 35°C
Energy Star-compliant,
VESA DPMS-compatible = 1 W
Power consumption while operating: max.
45 W
max. 1440 x 900
Refresh rate max. 75 Hz
Storage -20°C ~ +60°C
English
Compliance
Input voltage Input voltage 220-240 VAC, 50 Hz
Speaker 1W x 2
VESA Wall Mount Receptacle 100 x 100 mm
Signal Input 15-pin D-Sub VGA (Analogue)
TÜV/GS, CE, Energy Star, TCO ’99
ISO 13406-2, 2002/95/EG (RoHS)
17
Page 19
Targa Visionary LCD 19-4 Wide
Troubleshooting
No power
English
Double-check all cable connections.
Power OK but no picture
Make sure that the supplied video cable is properly connected to
Adjust the brightness.
Wrong or distorted colours
If a colour (red, green, blue) is missing, check the connection of
Connect the monitor to a different computer.
Make sure that the power cord is properly connected to the wall
outlet and that the cables to the monitor are fixed properly into
their respective ports.
Connect a different electrical appliance to the wall outlet to verify
that it is working properly.
the graphics card output connector of your computer and to the
monitor. If necessary, re-connect it.
the video cable. Loose, bent or broken pins in the connector
may deteriorate the signal transmission.
Pixel Error Classes
Pixels are single dots making up the picture that appears on the
screen. One pixel always consists of three sub-pixels for displaying
the basic colours (red, green and blue).
The Pixel Error Classes are rated from Level I (very good) to Level
IV (bad quality). Your LCD 19-4 Wide belongs to Error Class II and
therefore offers a high-quality display. Within the Error Classes a
limited number of pixel may present errors. There are three types
of errors:
18
Page 20
Targa Visionary LCD 19-4 Wide
Type 1: Continuous lighting pixel (a bright, white dot), even when
it should not light.
Type 2: Non-lighting pixel (a dark or black dot) even when it
should light.
Type 3: Abnormal or defective sub-pixels of the basic colours
(e.g. steady lighting with half intensity, non-lighting of a
specific colour, blinking or flickering, but not included in
Type 1 or Type 2).
Furthermore, a so-called cluster (a matrix of 5x5 pixel) may contain
a limited number of erroneous pixel only.
For Error Class II, for each 1 million pixel only 2 pixel may contain
errors of Type 1, Type 2 and Cluster; it may present up to 5
erroneous pixels of Type 3 (see the following table).
Error Class Type 1 Type 2 Type 3 Cluster
I
II
III
IV
0 0 0 0
2 2 5 2
5 15 50 5
50 150 500 50
Considering the recommended resolution of your LCD 19-4 Wide
(1440 x 900) it contains 1,296,000 pixel. From this value we can
deduce the maximum amount of erroneous pixel (see the following
table).
English
Error Class Type 1 Type 2 Type 3 Cluster
LCD 19-4 Wide
3 3 7 3
19
Page 21
Targa Visionary LCD 19-4 Wide
English
20
Page 22
TARGA GmbH
Lange Wende 41
D-59494 Soest
Deutschland
www.targa-online.com
Ready for you:
www.targa-online.com
Loading...