Tap Magic 30640P User Manual

SECTION 1: Identification of the substance/mixture and of the supplier

Product name:

Tap Magic PROTAP

Manufacturer/Supplier Article n umber:

30004P, 30016P, 30128P, 30640P, 33840P, 37040P

Special Notes on Product uses:

After use of this product, clean and lubricate metal surfaces to
avoid staining and/or corrosion.

Recommended uses of the product:

Machining, Cutting, Tapping, and Metal Processing.

Manufacturer/Supplier Details:

Email: [e-mail]

Emergency telephone number: ChemTel Inc.: [phone], [phone]

SECTION 2: Hazards identification

GHS07

Skin Sens 1 H31 7

Unknown Acute Toxicity: No additional information.

NFPA/HMIS

NFPA SCALE (0-4)

HEALTH

1*

HMIS SCALE (0-4)

FIRE

1

0

0

1

1

The Steco Corporation
2330 Cantrell Road

Little Rock, AR 72202 USA

Tel: [phone]
Website: www.tapmagic.com

Safety Data Sheet

Tap Magic PROTAP

Page 1 of 8

Classification of the substance or mixture:

Skin Irrit. 2; H315
Eye Irrit. 2; H319

Signal word: Warning.
Hazard statements:

H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.

Precautionary statements:

P264: Wash hands and exposed skin thoroughly after handling.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves, protective clothing, eye protection, and face protection.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and
easy to do – continue rinsing for 15 - 20 minutes.
P337+P313: If eye irritation persists get medical advice/attention.
P321: Specific treatment (Section 4).
P362: Take off contaminated clothing and wash before reuse.
P302+P352: IF ON SKIN: Wash with soap and water.
P333+P313: If skin irritation or a rash occurs: Get medical advice/attention.

P501: Dispose of contents/container as directed in Section 13.

Hazards Not Otherwise Classified (HNOC): None.

Health = 1

Fire = 1

Reactivit y = 0

0=Minimal Hazard; 1=Slight Hazard; 2=Moderate Hazard; 3=Serious Hazard; 4=Severe Hazard.

This SDS applies to part numbers: 30004P, 30016P, 30128P, 30640P, 33840P, 37040P

PHYSICAL HAZARD

Health = 1*

Fire = 1

Physical Hazar d = 0

Safety Data Sheet

SECTION 3: Composition/information on ingredie nts

Oleic acid, pure

Skin Irrit. 2, H315; Eye Irrit. 2A, H319

Tris(momo-nonylphenyl) phosphite with 1%

Skin sens 1 H317; AqAc 1 H400, AqCh 1 H410

SECTION 4: First aid measures

SECTION 5: Firefighting measures

Page 2 of 8

Tap Magic PROTAP

Chemical characterization: Mixture.
Description: Machining, cutting, tapping, and metal processing fluid.
Hazardous components:

CAS / Identifying No. Description Wt. %

CAS: 112-80-1

CAS: 26523-78-4

Description of first aid measures

General information:

Take affected persons into fresh air, if feasible, or away from the source.
Consult a doctor/physician if concerned or feel unwell.
Immediately remove any clothing soiled by the product.
In case of irregular breathing or respiratory arrest, provide artificial respiration.

After inhalation:

Supply fresh air; consult doctor in case of complaints.
If aspirated, seek medical attention immediately.
Provide oxygen treatment if affected person has difficulty breathing.

After skin contact:

Immediately wash with water and soap and rinse thoroughly.
If skin irritation continues, consult a doctor.

After eye contact:

Remove contact lenses if worn.
Rinse opened eye for at least 15 - 20 minutes under running water. If symptoms persist, consult a doctor.

After swallowing:

Rinse out mouth and then drink plenty of water.
Call for medical help immediately.
Do not induce vomiting.
If victim vomits, be sure to keep head below knees to prevent aspiration of vomitus into lungs.
If victim is unconscious, position on their side and support them so they cannot roll onto their back.

Most important symptoms and effects, both acute and delayed:

Breathing difficulty.
Coughing.
Irritant to skin and mucous membranes.
Skin sensitization
Slight irritant effect on eyes.
Gastric or intestinal disorders when ingested.

Hazards:

Danger of impaired breathing.
May cause respiratory irritation.

Indication of any immediate medical attention and special treatment needed:

Consult a doctor/physician if concerned or feel unwell.

As listed below

triisopropanolamine

75 - 90%

0 – 5%

Extinguishing media

Suitable extinguishing agents:

Use an extinguishing agent suitable for the surrounding fire.

This SDS applies to part numbers: 30004P, 30016P, 30128P, 30640P, 33840P, 37040P

Safety Data Sheet

SECTION 7: Handling and storage

Tap Magic PROTAP

Foam.
Carbon Dioxide.
Dry Chemical.

For safety reasons unsuitable extinguishing agents:
Special hazards arising from the substance or mixture: Carbon monoxide.

Advice for firefighters

Protective equipment:

Use self-contained breathing apparatus (SCBA) and full bunker turnout gear in a sustained fire.
Wear fully protective suit.

Hazardous Combustion Products:

Incomplete combustion is likely to give rise to a complex mixture of airborne solid and liquid particulates and
gases, including carbon monoxide and unidentified organic and inorganic compounds.

Additional information:

Cool endangered receptacles with water fog or haze.
Use large quantities of foam as it is partially destroyed by the product.

SECTION 6: Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Use respiratory protective device against the effects of release.
Wear protective equipment.
Keep unprotected persons away.
Ensure adequate ventilatio n.
Particular danger of slipping on leaked/spilled product.

Environmental precautions:

For small spills, soak up with shop towels or absorbent material such as oil-dry or vermiculite.
For large spills, any leaks should be stopped.
Spill should be contained, then cleaned up using vacuum truck or absorbent material.

Methods and material for containment and cleaning up:

Absorb with non-combustible liquid-binding material (sand, diatomite, acid binders, universal binders).
Pick up mechanically.
Send for recovery or disposal in suitable receptacles.
Dispose contaminated material as waste according to Section 13.

Reference to other sections:

See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

None known.

Page 3 of 8

Precautions for safe handling:

Prevent formation of aerosols.
Avoid splashes or spray in enclosed areas.
Use only in well ventilated areas.
Prevent from freezing.
**After use of this product, clean and lubricate metal surfaces to avoid staining and/or corrosion.

Conditions for safe storage, including any incompatibilities

Storage:
Requirements to be met by storerooms and receptacles:

Store only in the original receptacle.
Avoid storage near extreme heat, ignition sources or open flame.

Information about storage in one common storage facility:

Store away from oxidizing agents.
Do not store together with alkalis/caustic solutions.
Store away from foodstuffs.

This SDS applies to part numbers: 30004P, 30016P, 30128P, 30640P, 33840P, 37040P