Tap Magic 17040E User Manual

Safety Data Sheet

according to 29CFR1910/1200 and GHS Rev. 3

Effective date : 03.18.20 15

Page 1

of 7

Tap

Magic EP-Xtra

Created by Global Safety Management, 1-813-435-5161 -

www.GSMSDS.com

This SDS applies to part numbers: 10004E, 10016E, 10128E, 10640E, 13840E, 17040E

Ingredients:

SECTION 1: Identification of the substance/mixture and of the supplier

SECTION 2: Hazards identification

SECTION 3: Composition/information on ingredients

Product name
Manufacturer/Supplier Trade name:
Manufacturer/Supplier Article number: 10004E, 10016E, 10128E, 10640E, 13840E, 17040E

Recommended uses of the product and restrictions on use: Machining, Cutting, Tapping, and Metal

Processing.

:

Tap Magic EP-Xtra

Special Notes on Product Uses

and/or corrosion.

Manufacturer Details:

The StecoCorporation
2330 Cantrell Road
Little Rock, AR 72202 USA
501-375-5644
Website: www.tapmagic.com Email: [e-mail]

Emergency telephone number:

ChemTel Inc.:

[phone], [phone]

: After use of this product, clean and lubricate metal surfaces to avoid staining

Classification of the substance or mixture:

Signal word

Hazard statements:

: None

None

Precautionary statements:

None

Other Non-GHS Classification:

WHMIS

NFPA/HMIS

None

NFPA SCALE (0-4)

HMIS RATINGS (0-4)

Safety Data Sheet

according to 29CFR1910/1200 and GHS Rev. 3

Effective date : 03.18.20 15

Page 2

of 7

Created by Global Safety Management, 1-813-435-5161 -

www.GSMSDS.com

This SDS applies to part numbers: 10004E, 10016E, 10128E, 10640E, 13840E, 17040E

Tap Magic EP-Xtra

CAS 64742-53-6

Hydrotreated oil

1-60%

CAS 63449-39-8

Paraffin wax compound

1-25 %

Percentages are by weight

SECTION 4: First aid measures

SECTION 5: Firefighting measures

SECTION 6:

Accidental

release measures

Description of first aid measures

After inhalation:

Move exposed individual to fresh air. Loosen clothing as necessary and position individual in a comfortable
position. Seek medical advice if discomfort or irritation persists. If breathing difficult, give oxygen.

After skin contact:

Wash affected area with soap and water. Rinse/flush exposed skin gently using water for 15 -20 minutes. Seek
medical advice if discomfort or irritation persists.

After eye contact:

Protect unexposed eye. Rinse/flush exposed eye(s) gently using water for 15-20 minutes. Remove contact
lens(es) if able to do so during rinsing. Seek medical attention if irritation persists or if concerned.

After swallowing:

IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting.

Most important symptoms and effects, both acute and delayed:

Irritation. Nausea.

Indication of any immediate medical attention and special treatment needed:

If seeking medical attention provide SDS document to physician. Physician should treat symptomatically.

Extinguishing media

Suitable extinguishing agents:

Use water, dry chemical, chemical foam, carbon dioxide, or alcohol-resistant foam.

Unsuitable extinguishing agents:

None identified.

Special hazards arising from the substance or mixture:

Thermal decomposition can lead to release of irritating gases and vapors.

Advice for firefighters:

Protective equipment:

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

Additional information (precautions):

Avoid inhaling gases, fumes, dust, mist, vapor, and aerosols. Avoid contact with skin, eyes, and clothing.

Personal precautions, protective equipment and emergency procedures:

Ensure adequate ventilation. Ensure that air-handling systems are operational.

Environmental precautions:

Should not be released into environment.

Methods and material for containment and cleaning up:

Wear protective eyeware, gloves, and clothing. Refer to Section 8. Keep in suitable closed containers for
disposal. Refer to Section 13. Always obey local regulations.

Safety Data Sheet

according to 29CFR1910/1200 and GHS Rev. 3

Effective date : 03.18.20 15

Page 3

of 7

Tap

Magic EP-Xtra

Created by Global Safety Management, 1-813-435-5161 -

www.GSMSDS.com

This SDS applies to part numbers: 10004E, 10016E, 10128E, 10640E, 13840E, 17040E

Appearance
(physical state,

Liquid, Amber

Explosion limit
lower: Explosion

Not determined

Odor:

Mild

Vapor pressure at
20°C:

Not determined

Odor threshold:

Not determined

Vapor density:

Not determined

pH-value:

Neutral (non-aqueous)

R.elative density:

Not determined

Melting/Freezing point:

Not determined

Solubilities:

Insoluble in water

Boiling
point/Boiling range:

Not determined

Partition coefficient
(n- octanol/water):

Not determined

Flash point (closedcup):

>150 C

Auto/Self

- ignition

Not determined

SECTION 8: Exposure controls/personal protection

SECTION 9: Physica l and

chemical

properties

Reference to other sections:

Precautions for safe handling:

None

Avoid contact with skin, eyes, and clothing. Follow proper disposal methods. Refer to Section 13. Do not eat,
drink, smoke, or use personal products when handling chemical substances. Use only with adequate ventilation.

Conditions for safe storage, including any incompatibilities:

Keep container tightly sealed. Store away from incompatible materials.

Control Parameters:
Appropriate Engineering controls:

No applicable occupational exposure limits.

Emergency eye wash fountains and safety showers should be available in

the immediate vicinity of use or handling. Provide exhaust ventilation or
other engineering controls to keep the airborne concentrations of vapor
and mists below the applicable workplace exposure limits (Occupational

Respiratory protection:

Exposure Limits-OELs) indicated above.
Where risk assessment shows air-purifying respirators are appropriate

use a full-face respirator with multipurpose combination (US) or type
ABEK (EN 14387) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face
supplied air respirator. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN(EU).

Protection of skin:

Select glove material impermeable and resistant to the substance. Select
glove material based on rates of diffusion and degradation. Dispose of
contaminated gloves after use in accordance with applicable laws and
good laboratory practices. Use proper glove removal technique without
touching outer surface. Avoid skin contact with used gloves. Contact
glove manufacturer for specific information. Wear appropriate clothing to

Eye protection:
General hygienic measures:

prevent any possibility of skin contact.
Safety glasses or goggles are appropriate eye protection.
Avoid contact with skin, eyes, and clothing.