Tapfer 1001CTF, 1002CTF, 1003CTF User guide
Operating instructions
Portable charger
6000 LED - Model No. 1001CTF
10000 LED - Model No. 1002CTF
15000 LED - Model No. 1003CTF
Item No. and Model No. 1001CTF / 1002CTF / 1003CTF
Intended use
The product serves as a spare battery for mobile devices (for example, smartphone, tablet)
with 5 V/DC voltage. The charger has two USB-A outputs that can be used to charge suitable
devices. The included USB charging cable connected to the Micro USB input can be used to
charge the internal battery. To charge the product, a USB charger (not included) is required.
The product has a battery level indicator and is protected against overload, overcharging, and
short circuit.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, re, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Portable charger
• USB charging cable (Micro USB to USB-A)
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specic tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the device to reach room temperature before connecting and using it. This may
take several hours.
• Never operate the product unattended.
• The housing heats up during operation. Ensure sufcient ventilation. The housing
must not be covered!
• Do not short-circuit the USB connectors.
• Do not charge the product from a USB port of a computer or other products since
the power provided is insufcient. This can cause damage to the connected
product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Rechargeable batteries
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a re! Unlike conventional batteries/
rechargeable batteries (e.g. AA or AAA type), the casing of the LiPo rechargeable
battery does not consist of a thin sheet but rather a sensitive plastic lm only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into re. There is a danger of re and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the
product. Due to the rechargeable battery technology being used, you do not need
to discharge the rechargeable battery rst.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.
Operating elements
1 USB-A output
2 Battery level indicator
3 Micro USB input
4 Function button
1 3 42
Operation
Check the internal battery charge level before each use.
Make sure the connection values of your mobile device match those of the product
(see technical data).
The USB cable is not suitable for data transfer.
Remove any protective lms from the product.
a) LED indicator of the battery charge level
Press the function button (4) once briey to check the battery level. The remaining capacity on
the battery level indicator (2) is indicated by gures on the LED display as follows:
25 Remaining capacity up to 25 %
50 Remaining capacity up to 50 %
75 Remaining capacity up to 75 %
100 Remaining capacity up to 100 %
The gure that indicates the current battery level ashes while charging.
b) Charging the battery
• When using for the rst time, it is recommended to fully charge the product once.
• Charge the portable charger at the latest when only 25 is displayed and the battery level thus
falls below 25 %.
• To charge the portable charger, a USB charger (not included) is required. A USB charging
cable (Micro USB to USB-A) is included.
• Use only the Micro USB input (3) to charge the portable charger. Plug the Micro USB
connector of the USB charging cable into the Micro USB input.
• Plug the USB-A connector of the USB charging cable into a USB-A port of a USB charger.
Observe the technical data.
A USB charger with 2 A is recommended for the portable charger input current. If a
lower input current is used, charging will take longer. However, a higher input current
than 2 A will not reduce the charging time since the input current is limited.
• With a 2 A USB charger and a remaining battery capacity of approx. 20 %, the portable
charger can have the following charging times:
- Item No. / Model 1001CTF (6000 mAh): up to approx. 3.5 – 4 hours
- Item No. / Model 1002CTF (10000 mAh): up to approx. 5.5 – 6 hours
- Item No. / Model 1003CTF (15000 mAh): up to approx. 7.5 – 8.5 hours
Check the model you have purchased. While charging, the current battery level will be
indicated by the corresponding percentage ashing on the display.
• Once the battery is fully charged, the battery level indicator will be lit steadily.
• Disconnect the connected cables. The battery level indicator will go off after approx. 40 seconds.
c) Charging a mobile device
• Plug the USB-A connector of the USB charging cable into one of the USB-A outputs (1).
The maximum charging current (2.7 A) is distributed to the USB outputs when both
outputs are used. Therefore, take note of the amount of charging current required by
your mobile device. Observe the technical data.
• Connect the Micro USB connector to your mobile device.
• While charging, the battery level of the portable charger will be indicated by the corresponding
steadily lit percentage.
• Disconnect the USB charging cable from the connected product and the portable charger to
stop or interrupt charging.
• When the USB charging cable is disconnected from the portable charger, the battery level
indicator will go off after approx. 40 seconds.
Care and cleaning
• Disconnect the product from connected products and from the power supply before every
cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, bre-free cloth.
• When cleaning, be sure to avoid contact with water or other liquids.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage/current ..................... Micro USB input 5 V/DC, 2 A
Output voltage/current .................. USB-A output: 5 V/DC, 2.4 A per port
Both USB outputs combined max. 2.7 A
Operating conditions ..................... 0 to +40 °C, 20 - 90 % RH
Storage conditions ........................ -10 to +55 °C, 20 - 90 % RH
Item No. / Model No. 1001CTF
Internal battery .............................. lithium polymer (Li-Po) / 6000 mAh
Dimensions (L x W x H) ................ 125 x 67 x 15 mm
Weight .......................................... 148 g
Item No. / Model No. 1002CTF
Internal battery .............................. lithium polymer (Li-Po) / 10000 mAh
Dimensions (L x W x H) ................ 148 x 73 x 17 mm
Weight .......................................... 254 g
Item No. / Model No. 1003CTF
Internal battery .............................. lithium polymer (Li-Po) / 15000 mAh
Dimensions (L x W x H) ................ 154 x 75 x 22.5 mm
Weight .......................................... 311 g
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
These operating instructions are a publication by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower
2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions represent the
technical status at the time of printing.
Copyright 2018 by CEI Conrad Electronic International (HK) Limited
*1001_1002_1003CTF_1629000_1628888_1604593_v1_0518_02_hk_m_en
Loading...