TapeTech 16TT90 User Manual

Mud Heads

1380 Beverage Drive, Suite W
Stone Mountain, GA 30083
1-800-426-6256 | 678-892-2323

Models: 16TT & 16TT90

Operation and Maintenance Guide

Better – Faster – Every time

Operation

The Mud Head is designed to place a consistently wide ribbon of joint
compound to each side of the internal or external corner for installation of
paper tape or corner bead.

Snap the Mud Head onto the corner applicator or MudRunner® and fill it with
joint compound. Start at one end of the corner and apply pressure to the corner
applicator or MudRunner™ to start the flow of compound while moving the tool
along the corner to the opposite end. Now apply the tape or corner bead.

Maintenance

Clean thoroughly with brush and water (or water hose) to remove all joint compound from the tool.
After the tool is clean, lightly oil with Ames® Bazooka® Oil or any light machine oil.

Updated 04 2012

www.tapetech.com

© 2012 TapeTech Tool Co. All Rights Reserved