05/06
Q: I have chosen ash / strobe mode, but lights are
not changing
A: It is possible you may have set the change speed
too slow. Press the up and down button to increase
the ash/strobe speed
Q: How can I change the brightness level under
fade / ash / strobe mode
A: To adjust the brightness level in one particular mode:
1. Clear the mode by pressing “clear” button
2. Adjust the brightness level by pressing either o ne
of the buttons with number of 10, 20, 30 etc. to set
your wanted level
3. Choose the mode you need by pressing the
corresponding button.
Note: The adjustment won’t work if you have chosen
the mode before adjusting the brightness level. In this
case, please make sure you clear the mode rst.
Q: How do I change the ashing/strobe speed
A: During ash mode, you can use the 1Hz, 2Hz and 3Hz
button to set ashing speed. Also you can use the up
and down button to ne tune the ashing/strobe speed.
Security Warnings
- Serial connection will cause uneven brightness,
please do not connect more than 2 strings together
- Please do not cut the string light, this will permanently
break the circuit and damage the light beyond repair
- Although our lights are built with safety measures, we
do not recommend leaving the light unattended or
turn on permanently
- This is not a toy. It contains small parts and possible
choking hazard, please keep it away from children
FAQ
Q: Can I plug one string into the end of another string
A: No, you cannot plug end to end
Q: Lights are not working
A: Please check each connection are connected
correctly and the input power is correct
- Please do not hang anything from the string light as
the extra weight will break the light and cause
potential re hazard
- Be careful not to damage the wire or LEDs when using
staples, nails, and other sharp objects.
Technical Assistance
For technical assistance, please email to
support@taotronics.com with your purchase order
number and a detailed description of your issue. We
normally respond to enquiries within 24 hours.
For more information, please visit www.taotronics.com.
Warranty
This string light is covered with TaoTronics parts and
labor warranty for 12 months from the date of its
original purchase from authorized retailer and
distributer. Please contact TaoTronics Support
(support@taotronics.com) immediately to launch a
warranty claim. We will instruct you on how to return the
defective unit back to us for repair/replacement.
No return will be accepted without seller authorization.
Statement
We can only provide after sale services for products
that are sold by TaoTronics or TaoTronics authorized
retailer and distributer. If you have purchased your unit
from a different place, please contact the seller for
return and warranty issue.
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must withstand any interference
received, including interference that may cause
undesired operation.
and garden, and impress your family, friends, and
relatives with this easy to set up, DIY novelty lighting.
Bendable and Flexible
The high quality copper wire is thin and exible. Satisfy
your creativity desire by bending the TaoTronics LED
string light into many unique shapes, or twining around
plants and furniture you love, or pinned across walls
and ceilings and create the perfect atmosphere that
will please your heart and soul.