CSB.01
M2M Cellular Signal Amplifier
Operator’s Manual and Installation Guide
www.taoglas.com
Designed & Manufactured in The U.S.A.
Contents
1. Overview 3
2. Parts List 3
3. Installation Guide 4
4. Installation with an SMA Device - Fixed Location 4
5. Installation with an SMA Device - Mobile Location 6
6. LED Diagnostics 7
7. Diagnostic LED definitions 7
8. Passive Bypass Technology – Patent Pending 8
9. CSB.01 Specifications 9
10. Safeguard Features 10
11. Antennas 10
12. Warranty Information 11
1. Overview
The CSB.01 Wireless Network Range Extender is a high performance,
microprocessor controlled, bidirectional RF amplifier for the entire North
American 850 MHz cellular and 1900 MHz PCS frequency bands. The amplifier
has an automatic gain and oscillation control system that will automatically
adjust the gain and the output power if a signal anomaly occurs. This amplifier
is designed to operate as a direct connect unit within a cellular system, for
maximum performance in weak signal coverage areas. The input power
requirements for the amplifier are positive 8.0 to 32.0 volts DC (negative
ground).
2. Parts List
Depending upon the connector type of the cellular device, Taoglas can
customize the M2M kit to include the appropriate adapters to ensure a
seamless and quick installation. Adapter types include, but are not limited to
SMA, RP-SMA, MMCX, MCX, FME, and TNC.
1: CSB.01 Amplifier Unit
6. Optional –SMA-to-MMCX
Device Cable – If connecting
to an MMCX device.
3: Hardwire DC
Power Cable
2: AC/DC Power Adapter
5: SMA-to-SMA Device
Cable – If connecting to an
SMA device
4: Magnetic-Mount
Outdoor Signal Antenna
MB.TG30.A.305111
3. Installation Guide
Disclaimer: Installation of this device requires knowledge of basic electrical
and experience with installing electronic devices. We recommend seeking
a professional installer if you are not accustomed to installing electronics
or high tech devices. Installation of this device is at your own risk. Taoglas
assumes no responsibility for the installation or improper operation of this
device. Contact your dealer or nasales@taoglas.com with “Installation Help” in
the subject line for assistance.
4. Installation with an SMA
Device - Fixed Location
1. If connecting to a Cellular Modem (e.g.
Raven X, CradlePoint), connect the
SMA to SMA device cable (#5 on Parts
List) to the Taoglas Amplifier
connector marked “Device”.
Loading...