Tansun SOR 210IPT EU, SOR 210IPT UK, SOR 210IPT, SOR 215IPT, SOR 215IPT UK Reference Manual

F ol l ow i n g i nf o r ma t i on is o nl y fo r E U - me m be r st a t es :

The use of this symbol indicates that t his product may not be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about
recycling of this product, please contact your local council, your household waste disposal service or the shop where you
purchased the product.

©Tansun Limited 2012 P art No. 042222 Issue. 3b

Reference Manual

Sorrento IP

Triple

UK & EUROPEAN MODELS:
SOR 210IPT, SOR 210IPT UK, SOR 210IPT EU,
SOR 215IPT, SOR 215IPT UK, SOR 215IPT EU,
SOR 220IPT, SOR 220IPT UK, SOR 220IPT EU.

Spectrum House, Unit 1, Ridgacre Road,

West Bromwich, West Midlands, B71 1BW, England.

Tel: [phone] - Fax: [phone]

Email: [e-mail] - Website: www.tansun.com

W AR N I NG : R i sk o f F i re

Keep combustible materials such as furniture, papers, clothes and curtains at least 1.8m (6 feet) from the front of the heater and away
from the sides and rear. If the heater is to be used outside, we recommend that a waterproof or indoor socket is used.

2

I nt r od u c ti o n

The Sorrento IP Triple heater produces radiant heat like the sun, warming people and objects rather than the air in between. It is mounted on an
adjustable bracket that allows the heat to be directed exactly where it is required. Its att ractive, lightweight design means that it is effective yet
unobtrusive. The Sorrento IP Triple heater is designed for indoor and outdoor use so is therefore weatherproof.

Please read the following instructions carefully before use. The safety of this heater is guaranteed on ly by its correct usage in accordance
with these instructions, therefore it is recommended that they are retained for future reference.

S pe c if i c at i on

T a b le 1 . U K an d E u r o p ea n H e a t e rs

Use MCB Type 3.

C au t io n

Before using this appliance:

- Check that the voltage indicated on the type plate corresponds to the mains supply voltage.

- Ensure that the heater has been securely fastened in its final mounting position.



Do not locate the heater immediately below a socket outlet.



Remove the plug from the mains s ocket (or disconnect pole switch) during installation, cleaning and/or replacing the emitter
and always ensure that the emitter is cool.



Do not handle the quartz emitter with bare hands. If it is inadvertently touched, remove finger marks with a soft cloth and
methylated spirit or rubbing alcohol. Otherwise, the marks will burn into the quartz glass causing premature heater failure.



Do not use an extension cable with this product.



Keep the mains cable away from the body of the heater which will get hot during use.



Do not cover or obstruct the heater while it is in use.



This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.



Do not insert any object through any slot or opening in the heater.



Do not use if guard is not present.



Do not install less than the minimum mounting distance from the floor.



Do not use the heater in a bathroom.



Warning - this appliance must be connected to a supply that is earthed!

C on f ig u r at i on s

The Sorrento IP Triple heater is a single unit that contains three lamps. It can be installed as an individual unit or joined to one m ore unit. It is supplied
with joining bars that connect the heaters together to increase the size and output of the installation. The maximum number of single units that can be
joined together is two. Please read the section ‘joining individual heaters together’ for information on how t his should be done.

No. of Units

Voltage Emitters x Total Current Total Min. height Min. dist. Min. dist. Dimensions (inc. Weight Ingress

x

(V) Power Power (A) per Current (A) from floor from from side bracket & bars max. (kg) Protection

Model Type

(kW) (kW) emitter of unit (m) ceiling (m) wall (m) pos.) W x H x D (mm)

(IP)

1 x SOR 210IPT

230

3 x 1.0

3.0 4.3 13.0 3.0 0.5 1.0 1202 x 228 x 323 8.0 IP24

1 x SOR 215IPT

230

3 x 1.5

4.5 6.5 19.6 3.5 0.5 1.0 1202 x 228 x 323 8.0 IP24

1 x SOR 220IPT

230

3 x 2.0

6.0 8.7 26.1 4.5 0.5 1.5 1202 x 228 x 323 8.0 IP24

2 x SOR 210IPT

230

6 x 1.0

6.0 4.3 26.1 4.5 0.5 1.5 1202 x 460 x 142 16.0 IP 24

2 x SOR 215IPT

230

6 x 1.5

9.0 6.5 39.1 5.0 0.5 1.5 1202 x 460 x 142 16.0 IP 24

2 x SOR 220IPT

230

6 x 2.0

12.0 8.7 52.2 5.0 0.5 1.5 1202 x 460 x 142 16.0 IP24

I ns t al l a ti o n - Al l Co n fi g ur a t io n s



Warning - this appliance must be connected to an earthed supply.



The wired versions (210IPT UK, 210IPT EU, 215 IPT UK, 215 IPT EU, 220IPT UK & 220IPT EU) are fitted with 5.0 metres of supply cable and a
moulded plug, therefore it is unnecessary to remove the terminal box in order to carry out normal installation of these models.



All unwired versions (210IPT, 215IPT & 220IPT) should be installed by a suitably qualified electrician, following the instructions below.



All installations must be in accordance with the latest I.E.E safety regulations or equivalent.



We recommend using a RCD where applicable.



If self wiring, a large double pole switch with a 3.0mm contact disconnection should be fitted.



If the supply cord becomes damaged, it must be replaced by the manufacturer, its service agent or a similar qualified person in order to avoid a
hazard.



Please observe the minimum safe distance between the heater body and any inflammable surfaces.

BLANK PAGE

7