UNO FAMILY SMART SERVICE ROBOT
Product User Manual
Shenzhen T anscorp Technology Co., Ltd,
http://www.tanscorp.com
Safety Warning FCC Warning Statement
Do not drop, disassembly, open, crush, bend, puncture, cutting, microwave, incinerate or paint this
robot, Also not allowed to be deformed or insert foreign objects.
Please carefully treat your robot and its accessories and place on a clean & pollution-free place.
Please carefully treat your robot and its accessories and place on a clean & pollution-free place.
Do not expose the robot and its accessories to an open flame or a litten cigarette products.
Do not expose the robot and its accessories to liquid, moisture or high temperature environments.
Do not drop, throw or try to bend robot or accessories.
Do not attempt to disassemble the robot and its accessories, disassembly operation is execused
only by authorized professionals.
Do not expose the robot and its accessories to extreme temperatures, but shall not be less than
-20 ° C, the maximum shall not exceed 50 ° C.
Please do not place the robot on an unstable table, cart, stand, tripod, bracket, or other unstable
platform to use.
Robots can use only specified power type marked on the voltage power label
Please consult your local relevant regulations about the disposal of electronic products.
UNO is baby’s friends, suitable for children aged three and above.
UNO execution action command, prohibition baby hold moving parts, avoid to damage external
components, causing UNO unable move or uncompleted move.
When on charging status, UNO can not executive move command.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installedand used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co‐located for operating in
conjunction with any other antenna or transmitter.
CONTENTS Product Profile
Introduction
Product Profile
Robot Operation
Interface Introduction
Special Application Introduction and Operation
Setting
Battery and Power Adapter
Mobile Phone Software
FAQ
Robot Specification
Packing list
Maintain
Help and Service
01
05
08
11
14
15
18
19
21
24
25
26
UNO is a family intelligent robot, which can help people to build more comfortable, convenient
and specific life scene, from education entertainment, remote control, family security to life information, reflect the wonderful intelligent life with full range.
Feeling --- multimodal fusion perception, visual; voice interaction twin engine combines local and
cloud intelligent voice recognition engine, voice recognition are more richer based on the Internet.
Interactive --- full sensory mode of human-computer interaction, far-field speech recognition:
within five meters of natural voice interaction; intelligent multi-sensing information coupling
technique: 8 large sensors interactive to enhance magic experience.
Control --- Diversified control way, whole body movement, language control. Controling Robot
movement, remote monitoring by voice, touch screen, sensors, mobile phones, pad etc, and phone
/ tablet can also receive feedback information from the robot.
Battery Installation
1.Use a cross screwdriver to unscrew the screws of UNO bottom battery compartment cover,
remove the cover.
2.Relatively plugging in the battery power cable with same color power cord inside the battery
compartment, then stuck the battery and power cord into the battery compartment, to pull the flap of
preventing the battery from shaking.
3.Install the battery compartment cover and tighten the screws.
UNO 01
Initial start Robot Diagram
Front View Side View
Initial start-up, UNO will enter into the active robot interface, you can finish activation according to
screen instructions. In order for you to enjoy more features and services, such as: Online Chatting、
Video Call etc., we recommend that you choose the Internet to activate the robot.
Note:
1. UNO wireless network factory default setting is on.
2. The robot ID factory-configured, users only need to set a password.
Head prees sensor
Camera
Right eye
Left ear touch sensor
Left shoulder sensor
Speaker
Portable
Neck touch sensor
Neck touch sensor
Back touch sensor
Chest sensor
Omni-directional wheel
Omni-directional wheel
Rechargeable USB battery compartment
Left food wheel
Bluetooth switch
Wi switch
Ear eyes light switch
Right food wheel
Mouch LED light
Left eye
Display
Voice receiver
UNO 02 UNO 03
Robot Button
Push Key
open or close screen display
Volume +
Push key, Pop-up volume bar and volume increase.
Volume –
Push key, Pop-up volume bar and volume decrease.
Power switch
Power on: push the key with 3 secs, power indicator lights，It represents the robot has started.
Power off: push the key with 3 secs, power indicator off，It represents the robot has closed.
If UNO is under the charge state, press and hold the button for 10 seconds then
shut down, or unplug the charger and then perform shut down operations 5.
Voice control commands
Robot Operation
Voice Control Operation
To control UNO to make appropriate language, movement or function jump etc feedback by voice.
Such as: speak “Dance”, UNO perform singing and dancing.
Say “play game”, UNO will enter into game interface.
Say “sing children song”, Uno will enter into children song interface.
Back View
Back speaker
Rear sensor
Power switch
Power input
DC 12V
UNO 05UNO 04
Loading...