Tannoy TS2.8 User Manual

TS2.8 Sub

OWNER’S MANUAL

TS2.8 Sub

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS 03

WARNINGS 03

FUSE PROTECTION 04

WARNING: STRONG MAGNETIC FIELD 04

EMC / EMI 04

ECODESIGN STANDBY POWER CONSUMPTION 04

WARRANTY 04

UNPACKING 05

POSITIONING YOUR SUBWOOFER 05

CONNECTING YOUR SUBWOOFER 05

VOLUME CONTROL 05

PHASE SWITCH 05

STANDBY SWITCH 05

CABINET CARE 05

TECHNICAL SPECIFICATIONS 06

REAR PANEL 07

02_TS2.8 SUB MANUAL

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.

11. Only use attachments/ accessories specied by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

15. Max. ambient temperature is 35 degree Celsius.

16. The use of apparatus in moderate climates.

TS2.8 Sub

The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage " within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

The below warning is located on the rear of the unit:

WARNINGS

• Voltages in this equipment are hazardous to life. Do not open the unit – risk of electric shock inside. There are
no user- serviceable parts inside. Refer all servicing to qualied service personnel.

• Make sure that the “Voltage Select” switch on the rear panel is set correctly for your area before connecting
the mains plug.

• Use only with the detachable power cord supplied with the apparatus, or by your local distributor or dealer.

• The MAINS plug is used as the disconnect device and shall remain readily operable.

• To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture and objects lled
with liquids, such as vases, should not be placed on this apparatus.

• Do not install this device in a conned space.

TS2.8 SUB MANUAL_03

FUSE PROTECTION

A mains fuse is provided on the back of this apparatus, which can only be removed with a screwdriver. This must
be replaced by a fuse of the same type and rating (see specications or refer to rear panel).

WARNING: STRONG MAGNETIC FIELD

Due to the powerful drive unit magnet, do not place within 1 metre (3 foot) of a cathode ray tube (CRT) television
or monitor. There is no issue with plasma, LCD and LED devices.

EMC / EMI

This equipment has undergone safety and EMC testing, and complies with the European Low
Voltage Directive Directive 2014/35/EU and Electromagnetic Compatibility Directives 89/336/EEC
and 2014/30/EU.

Changes or modications not expressly approved by Tannoy Ltd. for compliance could void the
user’s authority to operate the equipment.

ECODESIGN STANDBY POWER CONSUMPTION

This apparatus is designed to comply with EU Directive 2009/125/EC and Regulation 1275/2008. When in standby
mode, power consumption is less than 0.5 W.

WARRANTY

No maintenance of the loudspeaker is necessary.

Please register your Tannoy product online at www.tannoy.com.

All of our products have been produced and tested with care and precision to give rst-class service.

All passive components are guaranteed for a period of 5 years from the date of purchase from an authorised
Tannoy dealer subject to the absence or evidence of misuse, overload, or accidental damage.

All active and electronic components are guaranteed for a period of 2 years from the date of purchase from an
authorised Tannoy dealer subject to the absence of, or evidence of, misuse, overload or accidental damage. If
at any time during this warranty period the equipment proves to be defective for any reason other than accident,
misuse, neglect, unauthorised modication or fair wear and tear, we will repair any such manufacturing defect or,
at our option, replace it without charge for labour, parts or return carriage.

If you suspect a problem with a Tannoy product, in the rst instance, discuss it with your Tannoy dealer. If you
require further assistance then we ask that you deal directly with your local Tannoy distributor. If you cannot locate
your distributor please contact Tannoy Customer Services, at the address given below.

Customer Services, Tannoy Ltd., Rosehall Industrial Estate, Coatbridge, Strathclyde ML5 4TF, Scotland

Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]

DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION.

04_TS2.8 SUB MANUAL

UNPACKING

Check carefully for any sign of transit damage. In the unlikely event of transit damage, notify your shipping
company and/ or dealer as soon as possible for advice. It is recommended you store all packaging to allow
protected transport in future. Ensure that the following is present:

• Mains cord appropriate to your country of use.

POSITIONING YOUR SUBWOOFER

This subwoofer is designed to augment the low frequency output of your main or satellite loudspeakers in the
context of typically a 2.1 or 5.1 system setup. It should be positioned on the oor, ensuring air can circulate freely
around the rear panel. As the subwoofer only produces low frequencies, positioning is not critical. Bass output will
increase next to a wall or especially in a corner, so use the volume control to compensate when experimenting to
nd the most suitable position.

CONNECTING YOUR SUBWOOFER

Always make and check all connections before plugging your subwoofer into the mains. Make sure that the
Voltage Select switch on the rear panel is set to the correct voltage range.

LINE LEVEL INPUTS:

You can feed a line level input signal to your subwoofer by using either the single LFE phono input socket, or
stereo Left and Right phono sockets. Do not try to use both input options at once.

TS2.8 Sub

The LFE input is a mono feed from your AV receiver. Low pass ltering is done within the receiver, typically at 80
Hz, but may be adjustable, in which case some experimentation may be required to achieve the most seamless
integration to the satellite speakers. With this input, the “Frequency” lter control on the subwoofer has no effect.

For stereo or 2.1 operation, the Left and Right input sockets should be used. Here, the frequency control should be
used to match in with the main speakers, starting with the control at 12 o’clock, and adjusting the crossover control
to obtain an even tonal balance.

VOLUME CONTROL

The rear mounted volume control knob allows for the subwoofer output level to match that of the satellite or main
speakers. Due to variability in room acoustics and personal taste, some adjustment may be needed for best
results. The purpose of a subwoofer is to enhance the low frequency or bass performance of the main speakers,
but not to overpower. Any distortion from the subwoofer indicates it is being over-driven, in which case the volume
control should be turned down accordingly.

PHASE SWITCH

This is intended to best compensate for the relative distance between the listener, subwoofer and front or stereo
speakers, so the outputs do not cancel in the crossover region. Start with the switch in the 0° position, then move
to the 180° position. The correct setting is the one that provides the strongest bass output.

STANDBY SWITCH

This may be set to either AUTO or ON mode. In AUTO, the subwoofer will activate from power saving standby mode
in the presence of an input signal, and drop back into power saving mode shortly after a period of no activity. In ON
mode, the subwoofer remains powered at all times. Power off the mains switch, if unused for a long period of time.

CABINET CARE

The cabinet may be cleaned with a soft lint free cloth. The use of solvents or abrasive cleaners should be avoided.

TS2.8 SUB MANUAL_05

TECHNICAL SPECIFICATIONS

TS2.8 SUB

PERFORMANCE

Amplier outpu t power 180 W RMS

Low frequency roll off

(-6 dB, typical in room)

Crossover frequency 50 - 150 Hz variable, 2nd order

Drive unit 200 mm (8”), long throw side ring woofer

Magnetic shielding No

Protection systems Over temperature, switch on/of f transient, over current,

Input connections Phono (RCA) LFE and stereo left & right

User controls Volume, crossover frequency, phase (0-180

Power supply voltage 100 - 120 V / 22 0 - 240 V (switchable) 50- 60 Hz

Rated Maximum power consumption 200 W

Mains fuse 100 - 120 VAC T6.3 AL 250V/ 220- 240 VAC T3.15AL 250 V

Cabinet construction & nish MDF with black ne texture vinyl

Cabinet dimensions (H x W x D)

(incl. feet)

Weight 8.6 kg (19 lbs)

34 Hz

200 mm (8”), long throw auxiliary bass radiator (ABR)

over-drive (clipping compress or)

°

mode (auto/always on), mains on/off

320 x 324.2 x 270 mm (12.6 x 12.8 x 10.6”)

, switchable),

06_TS2.8 SUB MANUAL

REAR PANEL

TS2.8 Sub

TS2.8 SUB MANUAL_07

Tannoy adopts a policy of continuous improvement and product specication is subject to change.

Tannoy Limited - product designed in the United Kingdom.

All other trademarks remain the property of their respective owners.

tannoy.com

6481 0685 / 100315