Tannoy TA SERIES, TA 600, TA 1000, TA 1400 Technical Specifications

TA 600

TA 1000 TA 1400

TA SERIES

The TA Series of power amplifiers from Tannoy is a compact and versatile line of three professional
power amplifiers ranging from 450 to 1050 watts into 2Ω, all using conventional toroid iron
transformers. To achieve a compact design of 325mm (13 ”) deep and 2 rack units
high, the latest semiconductor technology is utilised, together with a sophisticated copper
cooling system.

The sonic performance inherent in all Tannoy professional products, allied to comprehensive
features, ensure these amplifiers are ideally suited to all situations from fixed installations to
cost-effective live sound systems.

Advanced Chassis Design

Hum fields from conventional toroidal and C-core types of iron transformers have always
been a cause of problems in power amplifier racks. They tend to interfere with more sensitive
circuits in, for example, equalizers and active crossovers. Pioneering work on Electro
Magnetic Compatibility (EMC) has lead to an advanced chassis design, within the Tannoy TA
series. Incorporating a sandwich construction of different iron materials minimises the
magnetic hum field.

3

/

4

TA 600 TA 1000 TA 1400

TECHNICAL SPECIFICATIONS

Max Output:

EIA at 1kHz and 1% THD
8Ω per channel
4Ω per channel
2Ω per channel
8Ω bridged
4Ω bridged

Distortion:

THD 20Hz - 20kHz
@ 1W to full power

Hum and Noise:

Below rated power

Output impedance:
Slew Rate:
Inputs:

Gain selectable

Impedance

Front panel:

Gain controls

Indicators:

protect
clip
signal present

Rear panel:

Input connectors

Clip limiters:
Power:

Operation voltage
115 V option
Full output power
Min. start voltage
Soft Start
Peak inrush current

Dimensions:

Size
Weight

TA600

190W
300W
450W
600W
900W

0.07%

-105dBA
30mΩ
30V/µs

20, 23, 26, 29,
32, 35, 38, 41

10kΩ

31 position

yes
yes

-40dB

Neutrik Combo+
and 3 pin Phoenix

On/Off each channel

150-260V
Ye s
230 V

­No
70A

2RU

12.5kg (27 lbs)

3

/

4

TA1000

300W
500W
700W
1000W
1400W

0.07%

-105dBA
30mΩ
45V/µs

20, 23, 26, 29,
32, 35, 38, 41

10kΩ

31 position

yes
yes

-40dB

Neutrik Combo+
and 3 pin Phoenix

On/Off each channel

150-260V
Ye s
230 V
180 V
Ye s
20A

2RU
15 kg (33lbs)

TA1400

425W
700W
1050W
1400W
2100W

0.07%

-105dBA
30mΩ
45V/µs

20, 23, 26, 29,
32, 35, 38, 41

10kΩ

31 position

yes
yes

-40dB

Neutrik Combo+
and 3 pin Phoenix

On/Off each channel

150-260V
Ye s
230 V
180 V
Ye s
20A

2RU
18kg (39lbs 9oz)

Approvals: CE

Emission: EN 55 103-1, E3

Immunity: EN 55 103-2, E3, with S/N
below 1% at normal operation level.

Safety: EN 60 065, class 1

FEATURES

1 INCREASED CURRENT CAPACITY

A sophisticated copper cooler system has been developed to decrease the chip temperature and maintain an even temperature between output devices. This
design, together with the latest semiconductor technology, has allowed us to create very compact and powerful output units.

2 MULTIPLE POSITION GAIN SWITCH

To meet the demands for a flexible gain structure in the system TA Series amplifiers offer a multiple position gain switch. The maximum amplifier gain can be
selected from among all industry standard settings provided - 20, 23, 26, 29, 32, 35, 38 and 41dB.

3 VERSATILE INPUT CONNECTIONS

With the Neutrik Combo-jack the TA Series amplifiers facilitate use of both the professional XLR-type standard and the semi-pro 1 ” TRS phono-jacks. For fixed
installation, provision of the three pin Phoenix terminal block allows for a high quality, simple and cost effective connection.

4 DUST FILTER ON THE FRONT PANEL

The most effective temperature reduction in an amplifier is achieved by front to back cooling. To avoid simply stuffing the amplifier and rack with dust, a removable
dust filter clip has been placed on the front panel for easy cleaning.

5 EASY TO READ LED-INDICATORS

To make trouble shooting the cabling and system easier, the LEDs located on the front panel indicate short circuit, high temperature or high frequency overload
protection circuit activation, while the clip indicator denotes the presence of severe clipping. The signal present lamp illuminates at -40dB below full output level.

6 SOFT START

Toroidal transformers require a huge amount of start up current to build a magnetic flux when the amplifier is switched on so, to minimise the risk of blowing
the mains supply fuse, a soft start circuit has been incorporated.

Tannoy United Kingdom T: [phone] F: [phone] E: [e-mail]
Tannoy North America T: [phone] F: [phone] E: [e-mail]

TA SERIES

1

/

4

6483 0811